• Journal of Plant Biology
• /
• 제17권4호
• /
• pp.158-162
• /
• 1974

Some ecological attributes of perennial plants and Pb contamination were analyzed for study plots near an entrance of Nevade Test Site at Mercury Valley, Nye County, Nevada. The surface of the desert pavement soil was composed of stones (1 to 4cm diameter). The underside of each stone was coated with coarse and fine sand (about 90%). The profiles of soil were constituted with the A-horizon and C-horizon only. The soil pH at the plots ranges from 7.6 to 8.5, C/N was 13 and cation exchange capacity showed 15me/100g. Nine species and 42 number of individuals were found in all plots. Franseria dumosa and Larrea divaricata were dominant species. The discrete clumps of vegetation were consisted of 9 species of common perennials and these were covered about 25% on desert pavement, on the other words, bare area without vegetation was about 75%. The size and spacing of the plants was irregular. Community coefficient as comparison between shrub species in these study area and those in near the low elevation desert indicated a low degree of similarity. Density, cover and productivity in the study plots as compared with those in the nearest study areas in Mercury Valley showed a higher value. The soils in the studied area involved high heavy metal contents in the plant tissue was higher than those of its soil. The leavds of Lycium andersonii tended to accumulate more Zn and Mo than those of the other species. Larrea divaricata leaves accumulated very high leaves of Fe and Ephedra nevadensis were generally high in Mn. Lead contamination was apparent in foliage of desert vegetation collected alongside the roadway, reflecting the variation in traffic volume. Lead contents greater than fifteen-fold of normal (low traffic) were found in plant foliage alongside the heavily traveled roadway. Lead content of old foliage by the heavily traveled roadway was as much as 129 ppm but that of new foliage 17 ppm only.

• 산업기술연구
• /
• 제24권B호
• /
• pp.89-94
• /
• 2004

This Study is results of experimental works to investigate the characteristics of vibro-compaction of crushed stones having coarse grain sizes. For testing material, crushed stone, sieved within very narrow ranges of grain size distribution, was used. Cyclic loading apparatus was used to apply cyclic loading to the specimen prepared in the mold. Tests were performed by changing the ratio of the maximum to the minimum stress, frequency and the magnitude of the maximum and the minimum stresses. Settlement of specimen due to cyclic loading was measured to analyze the compaction efficiency and sieve analysis test after cyclic loading test was also carried out to find the crushing rate of the specimen. As results of cyclic loading test, normalized settlement in terms of specimen height tends to be converged around loading cycle number of 1500. The magnitude of normalized settlement is in the range of 3.11 ~ 8.57%. The crushing rate is in the range of 4.46 ~ 8.78%. Normalize settlement and the crushing rate tend to increase with decreasing the ratio of the maximum to the minimum stresses and they tend to increase with increasing the frequency and the magnitude of the maximum and the minimum stresses for the given ratio. In conclusions, compaction rate of crushed stone is controlled by the dynamic stress (difference between the maximum and the minimum stresses) and the crushing rate is dominated by applied energy to the specimen.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.697-700
• /
• 2008

본 연구에서는 고로슬래그 혼합시멘트와 3성분계 저발열 혼합시멘트를 대상으로 하고, 여기에 CSA계 팽창재를 혼입함으로서 이에 따른 수축보상 효과와 함께 염해저항 특성에 미치는 영향에 대하여 검토하였다. 검토결과, 배합조건이 OPC이고, 팽창재 혼입율이 8%인 경우는 팽창재를 혼입하지 않은 경우에 비해 최대 43.7배까지팽창하는 것으로 평가되었고, 굵은골재 최대치수가 콘크리트의 길이변화특성에 미치는 영향은 적은 것으로 나타났다. 염해저항성은 굵은골재 최대치수가 클수록, 그리고 팽창재 혼입율이 증가할수록 개선되는 것으로 평가되었는데, 본 연구범위에서는 팽창재를 8% 혼입한 콘크리트의 염해저항성이 팽창재를 혼입하지 않은 경우에 비해 약 16% 정도 유리한 것으로 평가되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.227-233
• /
• 2008

Porous concrete has large continuous voids of 20-30 % by volume, and this concrete is attractive as environmental material in Japan i.e. permeable road pavement, river bank protection with vegetation and green roof system which influence thermal environment. It is necessary to confirm the frost resistance when constructing porous concrete structure in cold region. However applicable test method and evaluation criterion of porous concrete has not defined yet. Therefore, the object of this study is to investigate the frost resistance of porous concrete and this investigation attempts to address this concern by comparing 4 kinds of specified freezing and thawing tests methods (JIS A1148 procedure A/B and RILEM CIF/CDF test) in consideration of actual environment. RILEM freeze-thaw tests are different from JIS A1148 freeze-thaw tests, which are widely adopted for evaluating the frost resistance of conventional concrete in Japan, in water absorption, cooling rate, length of freezing and thawing period, and number of freezing and thawing cycles. RILEM CIF test measures internal damage and is primarily applicable for pure frost attack. CDF test is appropriate for freeze-thaw and de-icing salt attack. JIS A1148 procedure A/B showed extremely low frost resistance of porous concrete if the large continuous voids were filled with water and the ice expansion in the large continuous voids set in during cooling. Frost resistance of porous concrete was improved by mixing coarse aggregate (G7) which particle size is smaller and fine aggregate in JIS freezing and thawing tests. RILEM CIF/CDF test showed that freeze-thaw and de-icing resistance of porous concrete was seems to be superior in that of conventional concrete.

• 한국결정성장학회지
• /
• 제17권3호
• /
• pp.133-137
• /
• 2007

화력발전소에서 발생하는 저회와 준설공사 시 발생하는 준설토를 효과적으로 자원화하기 위하여 인공경량골재를 만들어 경량콘크리트에 적용 가능한지 물리 화학적 분석을 진행하였다. 서울에서 20 km 서쪽에 위치해 있는 영흥도에서 발생된 저회와 준설토를 이용하여 인공경량골재를 제조하였으며, 모든 원료는 혼합 전 분쇄하여 사용되었다. 제조된 골재는 KS에 의거하여 입도시험, 표건밀도와 흡수율 시험, 안정성, 알칼리 잠재반응, 중금속 용출 시험을 진행하였다. 입도분석에서 굵은 골재는 적정 조립율 값을 나타내었고, 잔골재는 조립율의 범위를 벗어났다. 경량화 될수록 흡수율이 증가하는 사실을 알 수 있었다. 안정성 및 중금속 용출 시험 결과 무해한 것으로 판단되었으나, 알칼리 잠재 반응성 확인 결과 몇몇 조성을 제외하고 무해한 골재로 판정되었다.

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.5-11
• /
• 2011

본 논문에서는 자연모래 2종(세사, 왕사)과 부순모래, 자갈 2종(10mm, 20mm)을 대상으로 실내시험을 통하여 입도 분포 특성, 마찰특성 및 토압특성 등 되메움 재료 별 이중보온관의 거동 특성을 평가하고, 합리적인 되메움 대체재료 제시를 위하여 기존 이중보온관 되메움재인 중사와 비교를 수행하였다. 연구결과에 따르면, 부순모래는 5종의 되메움 대체재료 별 평가결과 이중보온관에 미치는 공학적 특성 및 재료의 수급 측면에 있어 기존 중사를 이용하는 이중보온관 되메움재의 대체재료로 가장 합리적인 재료로 평가되었다.

• 한국해양학회지
• /
• 제28권4호
• /
• pp.259-271
• /
• 1993

한반도 주변해역 대륙붕의 표층퇴적물 연구 결과 대륙붕 퇴적물은 크게 니질퇴적 상과 사질퇴적상으로 대표되는 전형적인 쌍빈도 입도특성을 나타낸다. 외대륙붕지역에 넓게 분포하는 사질 및 역질퇴적물은 지난 빙하기 해수면 하강 당시 집적된 잔류 퇴적 물로 해석되며, 내대륙붕 해저에 분포하는 세립한 지질퇴적물은 현재의 퇴적환경에서 공급, 운반, 집적된 현생퇴적물도 해석된다. 이들 세립물질은 강한조석전선 및 연안전 선에 의하여 외양쪽 확산이 크게 제한되며, 한반도 연안에 따라 서해로부터 남해를 거 쳐 동쪽방향으로 운반되는 것으로 해석된다. 그러나 동해의 우포분지에 분포하는 암회 색의 니질퇴적물은 잔류성 퇴적물로 여겨진다. 중간대륙붕 지역에는 현생의 세립물질 이 사립의 잔류퇴적물과 혼합된 혼합성퇴적물이 분포한다. 또한 잔류퇴적물의 일부는 현재의 해양환경조건에서 지속적으로 재동된 Palimpset 퇴적물로 해석된다.

• 한국레이저가공학회지
• /
• 제10권4호
• /
• pp.13-17
• /
• 2007

Electron beam weldability was investigated for 1mm thick cold rolled sheets of commercially pure grade titanium and Ti-6Al-4V alloy. Accelerating voltage of 40kV, beam current of 6mA, and weld speed of 0.8m/min was used and focal position of focused electron beam was just on the surface of workpiece. Microstructure of weld metal, the heat affected zone and base metal was observed using optical microscope. Vickers hardness was measured across the welds and the transverse tensile test was carried out. Hydroformability test was also carried out for the butt welded coupons of commercially pure grade titanium. For the electron beam welded C P Ti, the average grain size was equiaxed $\alpha(15{\sim}25{\mu}m)$ for base metal, coarse equiaxed $\alpha(80{\sim}200{\mu}m)$ for weld metal and annealed and enlarged grain($40{\sim}120{\mu}m$) for the HAZ. The vickers hardness of C P Ti was $180{\sim}200Hv$ for base metal, and $160{\sim}180Hv$ for the weld metal and the HAZ. For the electron beam welded Ti-6Al-4V alloy, the vickers hardness was 360Hv for the base metal, abd $400{\sim}425Hv$ for the weld metal and the HAZ. All the failure occurred at the base metal, when the transverse weld tensile test was carried out for both electron beam welded C P Ti and Ti-6Al-4V alloy. The formability of electron beam welded C P Ti was decreased compared with that of C P Ti base alloy.

• Ecology and Resilient Infrastructure
• /
• 제4권4호
• /
• pp.216-225
• /
• 2017

We assessed the microhabitat conditions of three fish species (black shinner Pseudopungtungia nigra, striped shinner Pungtungia herzi, Korean shinner Coreoleuciscus splendidus) considering various stream order in the Geumgang River Basin. A total of 1,275 individuals were collected from 19 sites. And the microhabitat condition was assessed measuring flow velocity, water depth and substrate size at each site. The highest relative frequencies for P. herzi, C. splendidus and P. nigra were calculated 100% (n = 310), 78.9% (n = 784) and 47.3% (n = 181) respectively. P. herzi appeared in all streams, irrespective of their stream order; however, appearance in streams with the $2^{nd}$ order or lower was found to be scarcer than in the ones with the $3^{rd}$ order or higher. On the other hand, P. nigra and C. splendidus didn't appear in streams with the $2^{nd}$ order or lower. When it comes to P. nigra, the ones with 7 to 8 cm in length most frequently appeared. They inhabited streams, mainly, with 0.2 to $0.4m\;s^{-1}$ and 0.5 m in velocity and water depth, respectively. The three species all preferred runs as types of habitats with lots of coarse gravels-cobbles. P. herzi, the ones with 5 cm or shorter in length most frequently appeared. They inhabited streams, mainly, with 0 to $0.3m\;s^{-1}$ and 0.4 m in velocity and water depth, respectively. C. splendidus with 7 to 8 cm in length occupied the majority of them. They appeared in streams, mainly, with $0.9m\;s^{-1}$or higher and 0.3 m in velocity and water depth.

• 콘크리트학회지
• /
• 제9권3호
• /
• pp.119-126
• /
• 1997

최근 건설용 골재의 소비량이 증가하여 쇄석골재의 수요량이 급격히 늘어남에 따라 , 광산 현장에 적치 되어 있는 폐석을 효율적으로 활용하기 위한 연구가 활발히 진행되고 있다. 이 연구의 목적은 강원도삼화 지역에 분포하는 쇄석 골재용 석회암을 대상으로 암석 기재학적 화학적, 역학적 특성을 구명하여 건설용 골재로서의 적합성을 알아보고, 또한 부가가치가 높은 건설자재와 첨단산업소재 제품 개발의 원료로 활용할 수 있는 기초자료를 제공하는데 있다. 삼화지역에 분포하는 쇄석골재용 석회암은 크게 담회색의 세립질 석회암과 담갈색의 조립질 석회암으로 구분할 수 있었으며, 이중 양적으로 우세한 세립질 석회암은 돌로마이트가 함유되어 있어 MgO와 $SiO_2$의 함량이 높게 나타났고, 물성 및 역학적 특성을 고려할 때 보통암에 해당된다. 따라서 연구 지역의 쇄석골재용 석회암은 구성광물과 입자들의 크기 및 화학성분 등을 고려할 때, 대체로 시멘트 콘크리트용보다는 아스팔트 콘크리트용이나 도로 포장용 또는 철도용으로 이용하는 것이 더 좋을 것으로 판단된다.