• 한국환경농학회지
• /
• 제24권1호
• /
• pp.12-16
• /
• 2005

As a silicate source to rice, a coal ash was selected and mixed with phosphor-gypsum (50:50, wt $wt^{-1}$) to reduce the potential of boron toxicity and to supply calcium element. We expected that high con tent of calcium in this mixture might convert water-soluble phosphorus to less soluble forms and then reduce the release of soil phosphorus to surface runoff. The mixture was applied with the rate of 0, 20, 40, and 60 Mg $ha^{-1}$ in paddy soil (Nagdong series, a somewhat excessively drained loamy fine sand) in Daegok, Jinju, Korea The mixture reduced significantly water-soluble phosphorus (W-P) in the surface soils by shifting from W-P and Fe-P to Ca-P and Al-P during whole rice cultivation. In contrast with W-P, plant available phosphorus increased significantly with the mixture application due to high content of phosphorus and silicate in the mixture. The mixture of coal ash and phosphor-gypsum (50:50, wt $wt^{-l}$) would be a good alternative to reduce a phosphorus export in rice paddy soil together with increasing rice yields.

• 한국세라믹학회지
• /
• 제27권7호
• /
• pp.833-840
• /
• 1990

For the development of multi-functional materials which has water reducing power, air entraining power and waterproofing power as well as blending additive in cement mortar the coal ash was modified with asphalt-stearic acid or asphalt-boiled oil mixtures by mechanical treatment. And the physical properties of cement mortar blended with modified coal ashes were compared with those of the water-tightness-cement mortar and the ordinary-portland-cement mortar added with AE.water reducing agent. The mortar of coalash-blend-cement modified with asphalt-stearic mixture was increased acid about 20% in initial strengths and decreased about 20% in water absorption ratio than those of ordinary coalash-blend-cement. The mortar of coalash-blend-cement modified with asphalt-bolied oil mixture was similar to the cement mortar added with AE.water reducing agent in water reduction ratio, air entraining conents and the initial strengths, also was similar to the water-tightness-cement mortar in water absorption and water permeability ratios.

• 유변학
• /
• 제10권3호
• /
• pp.131-136
• /
• 1998

아역청탄을 이용하여 제조된 CWM(Coal-Water Mixture)연료의 유변학적 특성을 측 정함으로써 음이온 계면활성제 Temol-N, 안정제 Xanthan 및 전해질 등의 첨가제에 대한 성능을 평가하고 최적첨가조성을 결정하였다. 계면확성제의 흡착으로 인해 석탄입자는 음전 하를 띠게 되었고 표면에 전기이중층이 생성되었다. 전기 이중층의 전기적 반발력이 입자의 응집을 막았고 CWA 슬러리의 점도를 감소시켰다. 또한 Xanthan과 NaOH의 첨가로 인해 분산안정성 및 침강안정성이 향상되는 것을 관찰하였다. CWM에서 석탄입자가 차지하는 부 피비를 무게비로 전환하여 표현하고 분산계에서 입자의 부피비에 따른 점도변화를 예측하는 실험식인 Krieger-Dougherty 식과 Frankel-Acrivos 식에 적용하였다. 점도 실험값을 가지 고 식의 변수들을 결정해 본결과 CWM이 나타내는 점도의 석탄함량에 따른 변화를 위 식 들이 비교적 정확시 나타내 주는 것을 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.165-172
• /
• 2004

Co-incineration of coal and wastewater sludge was r;erfonn:rl in a O.lMWth bench scale circulating fluidized bed combustor(CFBC) Sludge was received from a wastewater treatment plant in a dye industrial complex in Busan. Metropolis. Moisture content of received sludge was 80%. Coal and sludge mixture was prepared with weight ratio of 90/10, 85/15 and 80/20. Co-combustion characteristics of the coal and sludge mixture demonstrated stable combustion conditions. Component analysis, incineration characteristics, boiler performance was measured before and after the test and application for commercial 59MWth CFBC boiler. The release of hazardous components such as $SO_2$ and Cl was suppressed by the presence of inherent minerals of Ca, Na, K in coal and sludge mixture. Pre-drying was not essential but it was recommended for the benefits of manageability of sludge.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.78.1-78.1
• /
• 2011

분포지역과 매장량이 한정되어 있는 석유에 비하여 석탄은 가채년수가 길고 세계 전역에 널리 분포되어 있으므로 향후 안정적인 에너지 공급으로 각광받고 있다. 석탄을 이용하여 CWM을 제조하는 기술은 석유에 비하여 저장, 수송, 분진 비산등의 문제점을 개선하여 위하여 1980년대부터 석탄 물 혼 합연료(Coal-Water Mixture)의 기술개발을 위한 연구가 진행되었다. 이는 미분탄(유연탄)에 30%정도의 물과 약간의 첨가제를 혼합하여 유체화하여 수송성은 액체연료와 같고 연소성은 석탄의 성상을 갖는 특징을 가지게 된다. 본 연구에서는 당센터에서 보유하고 있는 습식 분류층 가스화장치에 적용하기 위한 CWM(Coal Water Mixture)제조 특성을 연구하였다. 습식 석탄 가스화기에 사용되는 CWM은 미분되어진 석탄과 물, 첨가제를 일정비율로 혼합하여 사용하게 된다. 이때 공급되어지는 미분의 입도와 분쇄 형태에 따른 입자 형태, 입자의 분포에 따라서 CWM의 특성이 각각 다르게 나타나게 된다. 이때 만들어진 CWM의 농도와 점도 특성에 따라서 버너의 성능 및 가스화기 운전 조건등에 많은 영향을 미치게 된다. 습식 석탄 가스화에 적용된 예정인 대상탄을 대상으로 하여 석탄분쇄 형태에 따른 CWM의 제조 특성을 실험하였다.

• 에너지공학
• /
• 제3권2호
• /
• pp.130-150
• /
• 1994

Coal-water mixture(CWM) fuel has attracted much attention as a substitute fuel for oil by which high economics and short-term commercialization might be realized in comparison with other coal conversion technologies. There are many factors that affect the CWM combustibility, such as the physical properties of CWM, the performance of atomizer and burner, operating conditions, capacity and load of the boiler, etc. Particularly, atomization quality is extremely critical to achieving acceptable carbon conversion efficiency of CWM fuel and maintaining the flame stability, because the coal particles in the CWM droplets burn as agglomerates. This paper presents the R&D results about the CWM atomization characteristics, including the significance of CWM atomization the R&D results about the CWM atomization characteristics, including the significance of CWM atomization quality, the atomization and combustion mechanism, the type of CWM atomizer, size and size distribution of CWM droplets and some factors that influence the atomization performance.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1998년도 추계 학술발표회 논문집
• /
• pp.84-89
• /
• 1998

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.357-362
• /
• 2015

There is potential method to utilize the liquid carbon dioxide ($LCO_2$) in coal gasification plants. The $LCO_2$ could be used to effectively transport coal particles instead of conventional carrier such as liquid water ($H_2O$) particularly in wet-fed gasifier. However, there is a lack of fundamental study on the atomization behavior of $LCO_2$ coal slurry under high pressure condition. In this study, the flashing spray characteristics of a coal mixture with $LCO_2$ was examined during a throttling process by using a flow visualization system. The spray of coal water slurry which is in the Rayleigh-type break up mode was significantly different. This difference indicates that the coal water slurry did not effectively transport the coal, as compared to $LCO_2$ coal slurry.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.344-347
• /
• 2004

The amount of coal ash has been increasing and development of effective use is urgently needed. Various by-products and waste are expected to be used as resources from the point of reduction in environmental load. This is an experimental study to compare the properties of high volume coal ash concrete using the reclaimed coal ash. For this purpose, authors have started work to develop a production method of hardening coal ash concrete. Laboratory tests show that the optimum mixture of coal ash concrete can be determined from multiple regression analysis. According to test results, it was found that the compressive strength of the concrete can be determined by a single curve. And it is obtained from the analysis of the results tested for concrete with the ratio of total power to water and amount of land reclamation ash.

• 자원리싸이클링
• /
• 제4권1호
• /
• pp.20-24
• /
• 1995

어룡무연탄의 수력채탄시 산출될 수 있는 -200mesh의 분탄과 물위 슬러리를 COM(Coal Oil Mixture)화에 의하여 탈수시킴에 있어서 고분자응집제를 병행한 효과를 상징액의 빛 투과율로 조사하였다. 경유와 음이온 고분자응집제(A110)를 같이 사용하면 경유로만 응집시킬 때보다 낮은 교반속도에서도 COM이 형성되며 대단히 높은 상징액의 청정도를 보인다. 이때의 고분자응집제의 소요농도는 100g/t이고 경유의 소요량은 석탄량의 10%정도이다.