• Journal of Crop Science and Biotechnology
• /
• 제10권2호
• /
• pp.98-105
• /
• 2007

Phylogenetic relationships in Korean watermelons were evaluated by genetic similarity coefficients using 15 SSR(simple sequence repeat), 14 SCAR(sequence characterized amplified region) and 14 CAPS(sequence characterized amplified region) markers. The SSR markers were selected from previously reported melon and watermelon SSRs through testing polymorphisms within a set of commercial $F_1$ varieties. The SCAR and CAPS markers were developed from polymorphic AFLP(amplified fragment length polymorphism) markers between inbred lines 'BN4001' and 'BN4002'. From the AFLP analysis, 105 polymorphic fragments were identified between the inbred lines using 1,440 primer combinations of EcoRI+CNNN and XbaI+ANNN. Based on the sequencing data of these polymorphic fragments, we synthesized sequence specific primer pairs and detected clear and reliable polymorphisms in 27 primer pairs by indels(insertion/deletion) or RFLP(restriction fragment length polymorphism). A total of 43 sequence-based PCR markers were obtained and polymorphic information content(PIC) was analyzed to measure the informativeness of each marker in watermelon varieties. The average PIC value of SCAR markers was 0.41, which was similar to that of SSR markers. Genetic diversity was also estimated by using these markers to assess the phylogenetic relationships among commercial varieties of watermelon. These markers differentiated 26 Korean watermelon varieties into two major phylogenetic groups, but this grouping was not significantly correlated with their morphological and physiological characteristics. The mean genetic similarity was 66% within the complete set of 26 commercial varieties. In addition, these sequence-based PCR markers were reliable and useful to identify cultivars and genotypes of watermelon.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권4호
• /
• pp.1-12
• /
• 2010

Well production by a riverbank filtration facility with multi-radial collector well systems in Jeungsan-ri, Changnyeong gun, Korea was evaluated. In this study, the drawdown at collector wells due to pumping and groundwater inflow rates along the horizontal arms of the collector wells were computed through numerical simulations. Sensitivities of the well production to hydraulic conductivity and well flow coefficient, which represents the resistance to the flow from the aquifer to the horizontal arms, were analyzed. Simulation results showed that, with given proposed pumping rate conditions, the drawdown in the caisson exceeded maximum drawdown constraints in the study site and the adjustment of the pumping rate at each well is needed. The drawdown is affected by the hydraulic conductivity of the main aquifer and the well flow coefficient, which means the profound field investigation of the study site is needed to accurately estimate the efficiency of riverbank filtration through radial collector wells.

• 한국유기농업학회지
• /
• 제27권3호
• /
• pp.289-306
• /
• 2019

The study is a comparative analysis of the differences in economic activities of two rural villages near the city. It is the general notion that rural villages near large cities lose the characteristics of traditional rural villages and change the areas with urban characteristics due to the influence of urbanization. The survey also showed that Munho 4-ri and Jeongbae 1-ri in Gyeonggi-do have urban characteristics, such as population growth, agricultural activity reduction and non-agricultural activity increase, and community activity reduction. However, they also found that there were important differences in the future development patterns of the two villages. In other words, the reasons and purposes of migration of people moving to the two villages, the differences in the system of economic activity in the villages, and the differences in community cooperation are emerging. Therefore, the study shows that policies to develop rural villages near cities need to be implemented differently based on the characteristics of those villages.

• 센서학회지
• /
• 제22권4호
• /
• pp.239-243
• /
• 2013

Several methods are available to measure the oxidation of edible oils, such as their acid, peroxide, and anisidine values. However, these methods require large quantities of reagents and are time-consuming tasks. Therefore, a more convenient and time-saving way to measure the oxidation of edible oils is required. In this study, an edible oil-condition sensor was fabricated using single-walled nanotubes (SWNTs) made using the spray deposition method. SWNTs were dispersed in a dimethylformamide solution. The suspension was then sprayed using a spray gun onto a prefabricated Au/Ti electrode. To test the sensor, oxidized edible oils, each with a different acid value, were prepared. The SWNT sensors were immersed into these oxidized oils, and the resistance changes in the sensors were measured. We found that the conductivity of the sensors decreased as the oxidation level of the oil increased. In the case of the virgin oil, the resistance change ratio in the SWNT sensor S(%) = {[(Rf - Ri)]/Ri}(%) was more than 40% after immersion for 1 min. However, in the case of the oxidized oil, the resistance change ratio decreased to less than that of the response of the virgin oil. This result suggests that the change in the oil components induced by the oxidation process in edible oils is related to the conductivity change in the SWNT sensor.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1535-1540
• /
• 2018

In this study, we prepared and characterized Nb-doped $Li_7La_3Zr_{2-x}O_{12}$ (LLZNO) powder and pellets with a cubic garnet structure by using a modified sol-gel synthesis and hot pressing. LLZNO powder with a very small grain size and cubic structure without secondary phases could be obtained by using a synthesis method in which Li and La sources in a propanol solvent were mixed together with Zr and Nb sources in 2-methoxy ethanol. A pure cubic phase LLZNO pellet could be fabricated from the prepared LLZNO and an additional 6-wt% of $Li_2CO_3$ powder by hot pressing at $1050^{\circ}C$ and 15.8 MPa. The hot-pressed LLZNO pellet with a relative density of 99% exhibited a very dense surface morphology. The total Li ionic conductivity of the hot-pressed LLZNO was $7.4{\times}10^{-4}S/cm$ at room temperature, which is very high level compared to other reported values. The activation energy for ionic conduction was estimated to be 0.40 eV.

• 지질공학
• /
• 제28권1호
• /
• pp.69-79
• /
• 2018

한국 정부는 온실효과에 대응하기 위해서 이산화탄소 배출을 850.6 Mt에서 2030년까지 314.7 Mt (37%)로 감축하기로 하였다. 이러한 상황에서, 한국 정부는 이산화탄소 지중저장시설로부터 누출되는 이산화탄소를 시함부지 규모로 연구하기 위하여 2014년에 이산화탄소 지중저장 환경관리연구단(K-COSEM)을 발족하였다. 이산화탄소의 누출을 탐지하기 위해서는 대산지역의 수리지질학적, 지구물리학적 특성을 규명하는 것이 필요하다. 본 연구에서는, 충북 음성군 대소면 내산리의 연구부지에서 2017년 6월 28일부터 7월 24일과 8월 7일부터 9월 11일까지 두 차례에 걸쳐서 각각 $CO_2$와 $SF_6$를 용해시킨 물을 지하에 주입하여 지하에서의 이산화탄소 누출 거동을 알아내고자 하였다. 주입정은 심도 24 m, 케이싱은 21 m까지, 스크린 구간은 심도 21~24 m 구간이다. 2017년 8월 18일과 9월 1일의 두 차례 전기비저항탐사로 주입수의 흐름과 전기비저항 특성을 파악하고자 하였다. 연구 결과에 의하면, 고 전기비저항대와 저 전기비저항대가 뚜렷하게 구별되며, 주입수의 유동방향은 자연상태의 지하수 흐름과 비슷하게 나타났다. 또한, 저 전기비저항대는 주입심도로부터 천부 표토층까지 광범위하게 형성되며, 이는 높은 투수성을 가지는 풍화대가 이산화탄소 누출 가능성이 높다는 것을 지시한다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권6호
• /
• pp.32-37
• /
• 2013

The scope of this study was to develop, design, and build an ex-situ remediation system of using the heating and water sparging treatment for the highly volatile DNAPL (Dense Non-Aqueous Phase Liquid) contaminated groundwater, and to conduct pilot testing at the site contaminated with DNAPL. The TCE (Trichloroethylene) removal was at the highest rate of 94.6% with the water sparging at $70^{\circ}C$ in the lab-scale test. The pilot-scale remediation system was developed, designed, and fabricated based on the results of the lab-scale test conducted. During the pilot-scale testing, DNAPL-contaminated groundwater was detained at heat exchanger for the certain period of time for pre-heating through the heat exchanger using the thermal energy supplied from the heater. The heating system supplies thermal energy to the preheated DNAPL-contaminated groundwater directly and its highly volatile TCE, $CCl_4$ (Carbontetrachloride), Chloroform are vaporized, and its vaporized and treated water is return edback to the heat exchanger. In the pilot testing the optimum condition of the HWSRS was when the water temperature at the $40^{\circ}C$ and operated with water sparging concurrently, and its TCE removal rate was 90%. The efficiency of the optimized HWSRS has been confirmed through the long-term performance evaluation process.

• 한국재료학회지
• /
• 제4권1호
• /
• pp.81-89
• /
• 1994

전자빔 증착법을 사용하여 10nm두께의 Ti과 18nm두께의 Co를 Si(100)기판에 증착한 후, $N_{2}$분위기에서 $900^{\circ}C$, 20초 급속 열처리하여, Co/Ti 이중금속박막의 역전을 유도함으로서 $CoSi_{2}$박막을 형성하였다. 4점 탐침기로 측정한 면저항은 3.9Ω/ㅁ 었으며, 열처리 시간을 증가해도 이값은 유지하여 열적 안정성을 나타내었다. XRD 결과는 형성된 실리사이드는 기판과 에피관계를 갖는 $CoSi_{2}$상 임을 보였으며, SEM 사진은 평탄한 표면을 나타내었다. 단면 TEM 사진은 기판위에 형성된 박막층은 70nm 두께의 $CoSi_{2}$ 에피박막과 그위에 두개의 C0-Ri-Si합금층등 세개의 층으로 되어 있음을 보였다. AES 분석은, 기판상의 자연산화막을 형성할 수 있었음을 보여주었다. AES분석은, 기판상의 잔연산화막이 열처리초기, Ti에 의해 제거된후 Co가 원자적으로 깨끗한 Si기판에 확산하여 $CoSi_{2}$에피박막을 형성할 수 있었음을 보여주었다. $700^{\circ}C$, 20초 + $900^{\circ}C$, 20초 이중 열처리를 한 경우, $CoSi_{2}$결정성장으로 면저항값은 약간 낮아졌으나, 박막의 표면과 계면이 거칠었다. 이 $CoSi_{2}$에피박막의 실제 소자에의 적용방안과 막의 역전을 통한 에피박막형성의 기제를 열역학 및 kinetics 관점에서 고찰하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.742-753
• /
• 2008

Currently an increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method (NATM). Therefore, a possibility of a tunnel collapse during excavation is getting higher in a proportionate manner. This paper will analyze causes the failure mechanism of a shallow NATM tunnel for different geological conditions, ground-water and invert solutions by investigation typical collapse site during tunnel construction. In this paper, this analysis performed two phase, firstly, the field investigation considering displacement measurement, ground-water level, geological characteristic, secondly, the numerical simulation considering the exist of invert construction and the effect of ground-water. It has been found that environmental factors such as state of underground water or construction sequences could influence failure mechanism of a shallow tunnel.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.904-909
• /
• 2004

The study area adjoins with Yangsan fault in Sangbuk-myeon, Samsam-ri, Kyongsang-namdo and consist of the natural steep slope. After drawing data layer which have altitude by using digital topography data, it is converted to lattice DEM of $10m{\times}10m$ size. From this, gradient map of unit lattice, slant direction map and shadow relif map are made. Using flow apportioning algorithm, upper slope contributing area and wetness index by established lattice can be calculated. Area that have high wetness index shows lineament structure of northwest-southeast direction, and this agrees with shear fracture system. The result of electricity specific resistance survey in the study area shows that area of high wetness index has low electricity specific resistance anomaly. That is, wetness index conforms with distribution of fractured zone that accompanied chemical weathering of rock. Therefore, wetness index can be used as the method of detecting fractured zones and judging the stability of the area.