• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.299-309
• /
• 1999

The composite resin, due to its esthetic qualities, is considered the material of choice for restoration of anterior teeth. With respect to shade control, the direct-placement resin composites offer some distinct advantages over indirect restorative procedures. Visible-light-cured (VLC) composites allow dentists to match existing tooth shades or to create new shades and to evaluate them immediately at the time of restoration placement. Optimal intraoral color control can be achieved if optical changes occurring during application are minimized. An ideal VLC composite, then, would be one which is optically stable throughout the polymerization process. The shade guides of the resin composites are generally made of plastic, rather than the actual composite material, and do not accurately depict the true shade, translucency, or opacity of the resin composite after polymerization. So the numerous problems associated with these shade guides lead to varied and sometimes unpredictable results. The aim of this study was to assess the color changes of current resin composite restorative materials which occur as a result of the polymerization process and to compare the color differences between the shade guides provided with the products and the actual resin composites before- and after-polymerization. The results obtained from this investigation should provide the clinician with information which may aid in improved color match of esthetic restoration. Five light activated, resin-based materials (${\AE}$litefil, Amelogen Universal, Spectrum TPH VeridonFil-Photo, and Z100) and shade guides were used in this study. Three specimens of each material and shade combination were made. Each material was condensed inside a 1.5mm thick metal mold with 10mm diameter and pressed between glass plates. Each material was measured immediately before polymerization, and polymerized with Curing Light XL 3000 (3M Dental products, USA) visible light-activation unit for 60 seconds at each side. The specimens were then polished sequentially on wet sandpaper. Shade guides were ground with polishing stones and rubber points (Shofu) to a thickness of approximately 1.5mm. Color characteristics were performed with a spectrophotometer (CM-3500d, Minolta Co., LTD). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$ and $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E{^*}ab$) of resin composites before the polymerization process and shade guides using the post-polishing color of the composite as a control, CIE standard D65 was used as the light source. The results were as follows. 1. Each of the resin composites evaluated showed significant color changes during light-curing process. All the resin composites evaluated except all the tested shades of 2100 showed unacceptable level of color changes (${\Delta}E{^*}ab$ greater than 3.3) between pre-polymerization and post-polishing state. 2. Color differences between most of the resin composites tested and their corresponding shade guides were acceptable but those between C2 shade of ${\AE}$litefil and IE shade of Amelogen Universal and their respective shade guides exceeded what is acceptable. 3. Comparison of the mean ${\Delta}E{^*}ab$ values of materials revealed that Z100 showed the least overall color change between pre-polymerization and post-polishing state followed by ${\AE}$litefil, VeridonFil-Photo, Spectrum TPH, and Amelogen Universal in the order of increasing change and Amelogen Universal. Spectrum TPH, 2100, VeridonFil-Photo and ${\AE}$litefil for the color differences between actual resin and shade guide. 4. In the clinical environment, the shade guide is the better choice than the shade of the actual resin before polymerization when matching colors. But, it is recommended that custom shade guides be made from resin material itself for better color matching.

• The Korean Journal of Pesticide Science
• /
• v.10 no.4
• /
• pp.313-319
• /
• 2006

Two hundred bacterial strains were isolated from the soil around healthy tomato plants in a polyvinyl house, where most of the other plants showed bacterial wilt symptoms. The strains were screened in vitro for their antibacterial activity. Among them, a strain, KPB3 showed strong bactericidal activity against bacterial wilt pathogen, Ralstonia solanacearum. The strain KPB3 was identified using physiological and biochemical tests, and 16S rRNA analyses. Based on these tests, the strain was found to be closer to genus Paenibacillus. To control the bacterial wilt caused by R. solanacearum, greenhouse experiments were conducted to determine the effectiveness of the Paenibacillus strain KPB3. Drench application of this strain ($4{\times}10^8$ CFU $mL^{-1}$) into the pots containing tomato plants, post-inoculated with the pathogen, R. solanacearum could drastically reduce the disease severity, compared to the non-treated plants. To evaluate effectiveness of this strain under field conditions, experiments were carried out in polyvinyl houses infested with R. solanacearum, during spring and autumn of the year 2006. It was observed that, during spring, bacterial wilt was more prevalent compared to the autumn. During spring, 50.9% disease incidences occurred in non-treated controls, while, Paenibacillus strain KPB3 treated plants showed 24.6% disease incidences. Similarly, during autumn, around 17.2% plants were infected with bacterial wilt in non- treated polyvinyl houses, compared to the Paenibacillus strain KPB3 treated plants, which showed 7.0% disease incidences. These results demonstrated that, Paenibacillus strain KPB3 is a potential biological control agent against bacterial wilt caused by R. solanacearum, effective under greenhouse as well as field conditions. This is the first report showing biocontrol of R. solanacearum using a Paenibacillus spp. under field conditions.

• The Korean Journal of Pesticide Science
• /
• v.10 no.4
• /
• pp.344-350
• /
• 2006

An Antiviral producing bacterial strain was isolated from ginseng root environment in Hongcheon, Kangwon province of Republic of Korea. Identification of this bacterial strain was performed by physiological and biochemical tests along with 16S rRNA analyses. The results revealed that the bacterium was closer to genus Serratia, which was named as Gsm01. The strain was grown in Mannitol-Glutamate-Yeast (MGY) broth for 48 h. The culture was centrifuged and the filtrate obtained was tested for its ability to control Cucumber mosaic virus strain Y (CMV-Y) in greenhouse and field experiments. In the green house experiments, CF was evaluated for its ability to protect local host, Chenopodium amaranticolor and systemic host of CMV, Nicotiana tabacum cv. Xanthi-nc. It was found that, CF treatment reduced viral infection by 98% in local host; C. amaranticolor. The N. tabacum cv. Xanthi-nc plants treated with CF did not show visible viral symptoms 15 days post inoculation (dpi) and remained symptomless throughout the periods of the study. To evaluate effectiveness of CF under field conditions, experiment was carried out in a polyvinyl house. It was observed that, 52% plants were protected from viral diseases compared to non-treated plants, increasing the crop yield. This is the first report showing antiviral activity of a Serratia spp. against CMV.

• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.186-191
• /
• 2006

In the present study, an attempt has been made to produce hybrid yeast strains of different useful and dominant characteristics. The hybrid yeast strains were produced by electrofusion and their genetic analysis were performed by RAPD-PCR (random amplified polymorphic DNA-polymerase chain reaction). The protoplast of Saccharomyces cerevisiae KCTC 7904 and Zygosaccharomyces rouxii KCTC 7966 were obtained above 92% when treated with lyticase at $30^{\circ}C$ for $60{\sim}90$ min after the pretreatment of $1{\sim}2%$ 2-mercaptoethanol at $30^{\circ}C$ for $15{\sim}20$ min. The fusant was produced from paired protoplast stage under the electric pulse at high frequency conditions (1.5 MHz/50 pV, 615 $V/256\;{\mu}sec$) within glass-platinum made electrofusion chamber. Changes in RAPD patterns in mother cells and hybrid cells proved that the fusant contains two types of yeast gene originated from its parent. Furthermore, fermentation characters exhibits by the fusant cell confirmed its genetic changes. These results suggest that genetically stable hybrid yeast strains of economic importance can be produced by electrofusion technique and these electrofused yeast cells have an enormous impact in biotechnology and biomedicine.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 1993

The purpose of this study was to evaluate the effect of various acid treatments on dentin bonding. Freshly extracted human teeth were uprightly embedded in self curing acrylic resin, and their occlusal surfaces were grinded to expose flat dentin surfaces. The specimens were divided into 4 groups. Specimens of one group were not treated so as to be a control and those of the other three groups were threated with 10% polyacrylic acid, 10% phosphoric acid, and 10-3 solution(10% citric acid/3% ferric chloride) respectively. Primer, bonding resin and composite resin were applied over the treated dentin surfaces sequentially. All specimens were stored in $37^{\circ}C$ distilled water for 24 hours, then the tensile bond strength was measured and the treated dentin surfaces and fracured dentin surfaces were examined under a scanning electron microscope. The results were as follows: Bond strengths of acid-treated groups were higher than those of the untreated group. In the acid-treated groups, bond strength was found to be the highest in the 10-3 solution group followed by the 10% phosphoric acid group and the 10% polyacrylic acid group(P<0.01). On SEM examination of dentin surfaces, the untreated dentin surface showed a remaining smear layer and closed dentinal tubules. Dentin surfaces treated with 10 % polyacrylic acid showed a clean dentin surface without the smear layer, but showed remaining smear plugs in dentinal tubules. A dentin surface treated with 10% phosphoric acid or 10-3 solution showed open dentinal tubules without the smear layer or smear plugs. On SEM observation of the fractured dentin-resin interface, the untreated group showed that failure occurred in the smear layer. The group treated with 10% polyacrylic acid showed no resin tag remained in the dentinal tubules, but resin tags in the dentinal tubules were observed in the group treated with the 10% phosphoric acid or the 10-3 solution. On the failure mode examination, the higher the bond strength of the group, the higher the frequency of cohesive failure. The coefficient between bond strength and cohesive failure rate was 0.71.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.42-51
• /
• 2004

Peat humin(p-Humin), humic acid(p-HA) and fulvic acid(p-FA) were isolated from Canadian Sphagnum peat moss by dissolution in 0.1M NaOH followed by acid precipitation. After purification cycles, they are characterized for their elemental compositions and, acid/base properties. Functionalities and carbon structures of the humic fractions were also characterized using FT-IR and solid state $^{13}C$-NMR spectroscopy. Those results are compared with one another and with soil humic substances from literatures. Main purpose of this study was to present a chemical and spectroscopic characterization data of humic substance from peat moss needed to evaluate its environmental applicability. The relative proportions of the p-Humin, p-HA and p-FA in the peat moss was $76\%,\;18\%,\;and\;3\%$, respectively, based on the total organic matter content ($957{\pm}32\;g/kg$). Elemental composition of p-Humin were found to be $C_{1.00}H_{1.52}O_{0.79}N_{0.01}$ and had higher H/C and (N+O)/C ratio compared to those of p-HA($C_{1.00}H_{1.09}O_{0.51}N_{0.02}$) and p-FA($C_{1.00}H_{1.08}O_{0.65}N_{0.01}$). Based on the analysis of pH titration data, there are two different types of acidic functional groups in the peat moss and its humic fractions and their proton exchange capacities(PEC, meq/g) were in the order p-FA(4.91) >p-HA(4.09) >p-Humin(2.38). IR spectroscopic results showed that the functionalities of the peat moss humic molecules are similar to those of soil humic substances, and carboxylic acid(-COOH) is main function group providing metal binding sites for Cd(II) sorption. Spectral features obtained from $^{13}C$-NMR indicated that peat moss humic molecules have rather lower degree of humification, and that important structural differences exist between p-Humin and soluble humic fractions(p-HA and p-FA).

• Parasites, Hosts and Diseases
• /
• v.29 no.4
• /
• pp.381-388
• /
• 1991

Trichomonas vaginalis is a parasitic nagellate in the urogenital tract of human. Innate cytotonicity of macrophages against T. vaginalis has been recognized, but any report on the cytotoxicity of Iymphokine-activated macrophages to T vaginalis is not yet available. The present study aimed to elucidate the Iymphokine-activated cell mediated cytotoxic effect against T. vaginalis by mouse peritoneal macrophages. Cytotoxicity was measured by counting the release of $^3H-thymidine$ from prelabeled protozoa, and tested in U-bottom microtiter plates. Nitrite concentration in culture supernatants was measured by standard Griess reaction. The results obtained are as follows: 1, The cytotoxicity of macrophages was increased by addition of rIL-2 or $rIFN-{\gamma}$$. 2, Cytotoxicity of macrophages was reduced by addition of rIL-4 to rOM-CSV, rIL-2 or $rIFN-{\gamma}$. 3. Crude Iymphokine mixed with anti-lL-2 decreased the cytotoxity of macrophages. 4. In case of macrophages cultured with $rIFN-{\gamma}$ or rIL-4, the concentration of nitrite was related with cytotokity of macrophages against T. vaginalis, but the cytotoxicity of macrophages cultured with rIL-2 and $rIFN-{\gamma}$ was decreased in spite of its high production of llitrite. From the results obtained, it is assumed that rIL-2 and $rIFN-{\gamma}$ enhance the cytotoxicity of macrophages while rIL-4 inhibits the cytotoxicity against T. vaginalis, and that the production of nitrite does not relate with the cytotoxicity of macrophages, but nitric oxide may play a role as an inhibitory factor on the proliferation of T. vaginalis.

• Journal of Life Science
• /
• v.17 no.3 s.83
• /
• pp.362-367
• /
• 2007

A total of 5 female elk deer (220 $kg{\pm}10$ kg) were included in a study on the changes in physico-chemical properties of deer meat during storage at $4^{\circ}C$. The deers were exposed to normal pre-slaughter handling and put under anesthesia before slaughtered. The loin and leg cuts were deboned from the carcass after 24hrs slaughter. The samples weighing approximately 300 g were packaged using three packaging methods : Atmospheric packaging(A), Vacuum packaging (V) and Modified atmospheric at packaging (M: 80% $CO_2$ +20% $N_2$)and stored for 3, 7, 11, 15, 20 and 25days at $4^{\circ}$. The ability of moisture maintenance tended to be decreased with the passage of storage time, and that of the meats treated with the vacuum wrapping was lower than that with other wrapping methods. TBARS values of the meats with the regardless of treatments was increased with the passage of storage time, although the values with vacuum wrapping was lowest. VBN values of the meats with the regardless of treatments was also increased with the passage of storage time, although the values with vacuum wrapping was also lowest. The pH values of the meats with the regardless of treatments was also increased with the passage of storage time, although the values with vacuum wrapping was also lowest. For the meat softness, the value of the meats treated with atmospheric packaging was increased with the passage of storage time, but the values with vacuum wrapping and modified atmospheric packaging were respectively decreased. There were no significant differences in luminosity of leg, although loin treated with vacuum wrapping was significantly brighter than that with atmospheric packaging and modified atmospheric packaging. In general, the index of red color of the meats treated with vacuum wrapping was higher than that with atmospheric packaging and modified atmospheric packaging. The index of yellow color tended to be decreased after increment for a time with the passage of storage time, although the value with vacuum wrapping was generally higher than that with other wrapping methods.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.61-66
• /
• 1989

Plants were exposed to different sub-optimal growth temperature regimes for hardening or sprayed with abscisic acid (ABA) before being placed at $10^{\circ}C$ for three days. Comparisons were made with non-treated plants for plant survival, photosynthetic activities and fatty acids composition of phospholipids. The level of endogenous ABA of the hardened seedlings was compared with that in control and ABA sprayed-seedlings. The results of the above experiment were summarized as follows: 1. Compared to non-treated plants, the hardening and ABA treatment resulted in higher plant survival rate and better seedling growth following earlier transplanting. The low temperature hardening which gradually increased the duration of the low temperature treatment at 2-day intervals was more effective than the controled temperature hardening which gradually decreased the temperature from $25^{\circ}C$ to $20^{\circ}C$ and $15^{\circ}C$. 2. The photosynthetic activities of rice leaves after 3-day exposure to $10^{\circ}C$ were higher in hardened and ABA sprayed seedlings than in non-treated plants. The root activities after low temperature treatment were also higher in hardened and ABA sprayed seedlings than in control. 3. Fatty acids of phospholipids in rice plants such as stearic acid and oleic acid were decreased and the highly unsaturated fatty acids, linoleic acid and lenolenic acid were increased by hardening or ABA treatments. It is assumed that the increase of cold tolerance in these plants was due to the higher ratio of unsaturated to saturated fatty acids. Respectively, the ratio was 1.86, 1.97 and 1.80 in plants given controled temperature hardening, the low temperature hardening and ABA treatments. While in control plants, it was 1.17. 4. ABA content in rice seedling given the low temperature hardening treatment was 67.2 ng/g F.W which was approximately twice that of non-treated control, which was 33.9 ng/f F. W., in contrast, the ABA content of the ABA treated seedlings was 91.7 ng/g F. W.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1071-1079
• /
• 2011

In this study, coal combustion ash (CCA) was evaluated for its stabilization effect on acidic mine waste with column experiment. Total of six treatments were installed depending on mixing ratio between coal wastes and CCA (0, 20, 40%) and mixing method (completely mixing and layered). Artificial acidic rain (pH 5.6) was used for feeding solution with flow rate of $0.05mL\;min^{-1}$. Result showed that higher pH of leachate was observed as more CCA was mixed. The highest pH in leachate was measured when 40% of CCA was mixed with coal waste (pH of 5.8). Also, complete mixing with CCA and coal waste was more effective to increase the pH of leachate than layered treatment. Regarding the reduction of soluble Fe amount, the highest efficiency (78%) was observed when 20% of coal ash was completely mixed with mine waste. Based on those result, optimum mixing ratio of coal ash with mine waste can be ranged 20-40% depending on environmental circumstances in the field.