• Journal of the Korean Geographical Society
• /
• v.48 no.1
• /
• pp.37-55
• /
• 2013

Previous studies have shown that Foehn was mainly observed in Young-seo area in Korea. However, they have failed to indicate the area where Foehn can be observed most frequently in Young-seo area and how Foehn is distributed in that area. This study targets HongCheon area in Young-seo province and examines the frequency and extent of Foehn in local scale through documenting a daily maximum air temperature map of Foehn. The period examined in this study is the months between March and June from 2003 to 2012. CoKriging method, which uses temperature and the altitude above sea, generates a higher level of accuracy in making daily maximum air temperature map of Foehn occurring days. We have found that Foehn is observed in certain areas, not all areas of HongCheon region, by compiling the daily maximum air temperature map. In particular, Foehn was found to be frequent and strong in the downstream of HongCheon river. In addition, we surveyed the residents of HongCheon about their perception of Foehn. They did not know whether high temperature and dryness in spring are caused by Foehn. The methods and techniques used to examine Foehn in local climate scale by this study will enhance the understanding of regional climate and contribute towards the research in this area. In particular, they can be applied to high temperature that recently occurred between spring and summer, excessive hotness in summers, agricultural plant growth in springs and etc.

• Journal of Environmental Impact Assessment
• /
• v.19 no.6
• /
• pp.647-656
• /
• 2010

As the $CO_2$ from buildings take up approximately 25% of the total $CO_2$ emission, the need for regulating and managing this emission is urgently required. Thus this study recognizes $CO_2$ emission status for diverse purposes and suggests accurate interpolation method for visualizing $CO_2$ emission as the basic data for regulating and managing $CO_2$ emission by applying IDW, Spline, and Kringing method. Results showed that Gaussian Function application among the Kriging methods had the highest accuracy in its estimations, with 3.049 with RMSE standards. This could be used as the basic data when visualizing $CO_2$ emission status, which is a necessity for many local and federal governments that are to regulate and manage $CO_2$ emission. This study shows that the interpolation is very appropriative method in recognizing $CO_2$ emission characteristics for regional climate change measures.

• Journal of Environmental Science International
• /
• v.22 no.2
• /
• pp.151-161
• /
• 2013

The assessment of personal exposure is a critical component in population-based epidemiologic studies of air pollution. This study was conducted to apply and compare the four exposure estimation methods of individual-level to air pollution concentration in a cohort including 2,283 subjects in Gwangyang, Korea. Individual-level exposure of air pollution were estimated using multiple approaches, including average across all monitors, nearest monitor, and spatial interpolation by inverse distance weighting and kriging. The mean concentrations of $PM_{10}$, $NO_2$, $SO_2$, CO, $O_3$ by four exposure estimation methods were slightly different but not significantly different from each other. Cross-validation showed that kriging was more accurate than other exposure estimation methods because kriging has probably predicted individual exposure levels equivalent to residential locations after estimating the parameters of a model according to the spatial surface of air pollution concentration. These data support that spatial interpolation methods may provide better estimates than selecting the value from the nearest monitor and averaging across values from all monitors by reflecting spatial attributes of air pollution on personal level.

• Geomechanics and Engineering
• /
• v.23 no.3
• /
• pp.261-273
• /
• 2020

This paper presents an efficient method utilizing user-defined computer functional codes to determine the reliability of an embankment slope with spatially varying soil properties in real time. The soils' mechanical properties varied with the soil layers that had different degrees of compaction and moisture content levels. The Latin Hypercube Sampling (LHS) for the degree of compaction and Kriging simulation of moisture content variation were adopted and programmed to predict their spatial distributions, respectively, that were subsequently used to characterize the spatial distribution of the soil shear strengths. The shear strength parameters were then integrated into the Geostudio command file to determine the safety factor of the embankment slope. An explicit metamodal for the performance function, using the Kriging method, was established and coded to efficiently compute the failure probability of slope with varying moisture contents. Sensitivity analysis showed that the proposed method significantly reduced the computational time compared to Monte Carlo simulation. About 300 times LHS Geostudio computations were needed to optimize precision and efficiency in determining the failure probability. The results also revealed that an embankment slope is prone to high failure risk if the degree of compaction is low and the moisture content is high.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.4
• /
• pp.339-346
• /
• 2009

The objectives of this study were to introduce spatial interpolation methods which have been applied in recent papers, to apply three methods (nearest monitor, inverse distance weighting, kriging) to domestic data (Ulsan cohort) as an example of estimating the personal exposure levels. We predicted the personal exposure estimates of 2,102 participants in Ulsan cohort using spatial interpolation methods based on information of their residential address. We found that there was a similar tendency among the estimates of each method. The correlation coefficients between predictions from pairs of interpolation methods (except for the correlation coefficient between nearest montitor and kriging of CO and $SO_2$) were generally high (r=0.84 to 0.96). Even if there are some limitations such as location and density of monitoring station, spatial interpolation methods can reflect spatial aspects of air pollutant and spatial heterogeneity in individual level so that they provide more accurate estimates than monitor data alone. But they may still result in misclassification of exposure. To minimize misclassification for better estimates, we need to consider individual characteristics such as daily activity pattern.

• Journal of Information Processing Systems
• /
• v.15 no.2
• /
• pp.386-398
• /
• 2019

The transmission capacity of transmission lines is affected by environmental parameters such as ambient temperature, wind speed, wind direction and so on. The environmental parameters can be measured by the installed measuring devices. However, it is impossible to install the environmental measuring devices throughout the line, especially considering economic cost of power grid. Taking into account the limited number of measuring devices and the distribution characteristics of environment parameters and transmission lines, this paper first studies the environmental parameter estimating method of inverse distance weighted interpolation and ordinary Kriging interpolation. Dynamic thermal rating of transmission lines based on IEEE standard and CIGRE standard thermal equivalent equation is researched and the key parameters that affect the load capacity of overhead lines is identified. Finally, the distributed thermal rating of transmission line is realized by using the data obtained from China meteorological data network. The cost of the environmental measurement device is reduced, and the accuracy of dynamic rating is improved.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.75-82
• /
• 2018

This study suggests an optimal design process of an LMU, which is installed on the top side of offshore structures. The LMU is consist of EB(elastomeric bearing) and steel plate, and supports the vertical loads of offshore structures and assists its stable installation. The structural design requirement of the LMU is related to its stiffness. This study utilizes the finite element analysis to predict the stiffness. The stiffness of the EB depends on the size of the bearing. Thus, the design variables in this study are defined as the thickness, the width and the number of plates. Since the LMU has different loads for different locations, its stiffness should be designed differently. The multiobjective function is introduced to attain the target stiffness. In this process, the metamodel using the kriging interpolation method is adopted to replace the true stiffness.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.11
• /
• pp.5-16
• /
• 2012

Since geologic data are often sampled at sparse locations, it is important not only to predict attribute values at unsampled locations, but also to assess the uncertainty attached to the prediction. In this paper, the assessment of the local uncertainty of prediction for the depth to weathered soil was performed by using the indicator kriging. A conditional cumulative distribution function (ccdf) was first modeled, and then E-type estimate was computed for the spatial distribution of the depth to the weathered soil. Also, optimal estimate of spatial distribution for the depth to weathered soil was determined by using ccdf and loss function. The design procedure and method considering the minimum expected loss presented in this paper can be used in the decision-making process for geotechnical engineering design.

• Spatial Information Research
• /
• v.20 no.5
• /
• pp.1-13
• /
• 2012

This study intends to evaluate the seasonal flow direction of carbon dioxide in Northeast Asia by using GOSAT, the first Greenhouse Observing SATellite, in an attempt to overcome costly, laborious and time consuming ground observation which has been frequently pointed out in existing studies. For this purpose, missing values were supplemented by applying the Kriging interpolation and the overall flow direction of carbon dioxide was determined through anisotoropy semi-variogram. As a result, it was found that the overall spatial distribution of carbon dioxide in Northeast Asia varies depending on the latitude, and that carbon dioxide mainly flows southeast or east in spring, autumn and winter, but northeast or north in summer. Similar to the flow of monsoons in Northeast Asia, these results show that carbon dioxide flows mainly from the west to the east, which proves that carbon dioxide discharged from China is influencing even the Korean Peninsula and Japan. However, as the flow of carbon dioxide varies depending on a variety of factors such as artificial sources, plant respiration, and the absorption and discharge of the ocean, follow-up studies are requested to evaluate such variables and the correlations.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.160-166
• /
• 2024

The inversion of radiation field distribution is of great significance in the decommissioning sites of nuclear facilities. However, the radiation fields often contain multiple mixtures of radionuclides, making the inversion extremely difficult and posing a huge challenge. Many radiation field reconstruction methods, such as Kriging algorithm and neural network, can not solve this problem perfectly. To address this issue, this paper proposes an optimized inverse distance weighted (IDW) interpolation algorithm for reconstructing the gamma radiation field. The algorithm corrects the difference between the experimental and simulated scenarios, and the data is preprocessed with normalization to improve accuracy. The experiment involves setting up gamma radiation fields of three Co-60 radioactive sources and verifying them by using the optimized IDW algorithm. The results show that the mean absolute percentage error (MAPE) of the reconstruction result obtained by using the optimized IDW algorithm is 16.0%, which is significantly better than the results obtained by using the Kriging method. Importantly, the optimized IDW algorithm is suitable for radiation scenarios with multiple radioactive sources, providing an effective method for obtaining radiation field distribution in nuclear facility decommissioning engineering.