• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.476-482
• /
• 1995

TbFeCo 박막의 Facing Targets Sputtering System 조건, 조성 및 시효 처리에 따른 광자기적 특성과 산화 특성을 조사하였다. XPS와 AES를 통하여 보호막 없이 제조된 TbFeCo 박막의 표면에는 Co에 우선하여 Tb과 Fe가 안정한 산화물의 형태로 존재하며, 표면에서 3.2nm 깊이부터는 산화되지 않은 TbFeCo 박막이 존재함을 확인하였다. TbFeCo 박막을 시효 시킴에 따라 Fe 산화층의 두께는 거의 변화가 없었으며, Tb Oxide 층만이 증가하였다. TbFeCo 박막은 사용된 기판의 종류나 제조조건에 따라 열적 안정성에 큰 차이를 보였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.888-892
• /
• 2004

It is necessary to develop soft magnetic layer with high saturation magnetization 4 $\pi{M}_s$ and in-plane magnetic anisotropy field Hk for soft magnetic underlayer of perpendicular magnetic recording media with high signal to noise ratio. Fe-Co-B layer with high 4 $\pi$Ms of about 23 kG deposited on Ni-Fe and Ni-Fe/Si seedlayer exhibited very high in-plane magnetic anisotropy filed Hk of about 280 and 380 Oe, respectively, In-plane XRD studies clarified that the lattice spacing of planes along the easy axis direction was longer than that along the hard axis direction in the Fe-Co-B layers with high Hk. These results indicate that high Hk of Fe-Co-B/Ni-Fe and Fe-Co-B/［Ni-Fe/si］ layers were resulted from magnetoelastic anisotropy owing to a residual stress. Moreover, the high Hk in the Fe-Co-B/Ni-Fe layer was maintained until 30$0^{\circ}C$ annealing temperature.

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.963-967
• /
• 1995

Ultra thin layers of NiFeCo or NiFe were inserted at the interfaces of Ni and Cu to form a multilayer structure. In case of inserting a NiFe layer, the magnetoresistance was about 6%, the saturation magnetic field was 50 Oe and the hysteresis of R-H (resistance-magnetic field) was very small. In case of inserting a NiFeCo layer, the magnetoresistance increased to about 7% but the saturation magnetic field and hysteresis were also increased. The increase of the output under biased magnetic field was much larger in case of inserting a NiFe layer because of relatively smaller hysteresis in R-H behavior.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.11a
• /
• pp.50-51
• /
• 1997

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.05a
• /
• pp.102-103
• /
• 2000

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.185-186
• /
• 2000

• Journal of the Korean Magnetics Society
• /
• v.9 no.2
• /
• pp.98-103
• /
• 1999

We have studied changes of coercivity $(H_c)$, exchange anisotropy field $(H_{ex})$ and MR ration in glass/Ta/NiFeI/CoI(t)/Cu/CoII(3/4 t)/NiFeII/FeMn spin valve structures by changing Ar pressure and thicknesses of Co layers using DC, RF sputtering methods. We obtained minimum coercivity of 2.8 Oe at 4 mTorr of Ar pressure, exchange anisotropy field of 50.0 Oe at 6 mTorr and 5.3 % of MR ratio at 10 mTorr. Also, we obtained 3.0 Oe of coercivity at 40 $\AA$ of CoI layer, 65.9 Oe at 13 $\AA$ and 4.7 % of MR ratio at 27 $\AA$ and 34 $\AA$ by changing the thicknesses of Co layers.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.31-38
• /
• 2015

Recently, a first-principles study led to a prediction that quaternary Heusler compounds, CoFeCrZ (Z = Ga, Ge) are excellent half-metallic ferromagnets. In this study, we investigate the electronic and the magnetic properties at the (001) surfaces of CoFeCrGa and CoFeCrGe by means of the full-potential linearized augmented plane wave (FLAPW) method within generalized gradient approximation. We considered two types of surface termination: CoFe-terminated and CrZ-terminated surfaces, Z being either Ga or Ge. From the calculated total magnetic moments and the local density of states, we found that half-metallicity is not preserved for all the surfaces. But the calculated atomic density of states showed that CrGa-terminated surface of the CoFeCrGa is almost half-metallic. The magnetic moment of the Co, Fe, or Cr atoms at the surface or subsurface layers in each system had very different values.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.41-47
• /
• 1999

$Buffer/[NiFe/Cu/CoFe(Co)/Cu]_N$ spin valve multilayers prepared by dc magnetron sputtering on a corning glass substrate using NiFe and CoFe(Co) posses different coercivities. Dependence of magnetoresistance on the type and thickness of buffer layer, thickness of Cu, NiFe, stacking number of multilayer, substrate temperature and annealing temperature in the form $[NiFe/Cu/CoFe(Co)/Cu]_N$ spin-valve multilayers were investigated. To evaluate effect of magnetoresistance for this samples, X-ray diffraction analysis, vibrating sample magnetometer analysis, and magnetoresistance measurement (4-probe method) were performed the maximum magnetoresistance ratio and coercivity were 7.5 % and 140 Oe, respectively for $Cr-50{\AA}/[NiFe-20{\AA}/Cu-{\AA}/Co-20{\AA}/Cu-50{\AA}]_10$ at substrate temperature of 9$0^{\circ}C$. Magnetoresistance slope maintained 0.25%/Oe until 15$0^{\circ}C$ of annealing temperature, and then decreased to 0.03%/Oe at 20$0^{\circ}C$. It was confirmed that the main factor of thermal stability was deteriorating of soft magnetic properties in the NiFe layer.

• Journal of the Korean Ceramic Society
• /
• v.19 no.3
• /
• pp.223-228
• /
• 1982

For the preparation of ferroxidure BaO.5.5 $Fe_2O_3$ with high coercive force, the green and calcined coprecipitates, which were obtained by neutralizing the mixed salt solution $FeCl_2-BaCl_2$ and $FeCl_3-BaCl_2$ with alkali solution $NaOH-Na_2CO_3$, were investigated about the thermal reaction, crystal growth, and the magnetic properties of the sintered specimens. The very single-domain crystallites of Ba-ferrite with high coercive force are formed from the coprecipitate of amorphous $Fe(OH)_3$ and amorphous $BaCO_3$ at lower temperature than that of subnucleus crystalline $\delta$-FeOOH and amorphous $BaCO_3$.