• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.411-414
• /
• 2009

We report single and two-stacked WOLED. Two-stacked WOLED structure adopts fluorescent blue EML and phosphorescent (red+green) EML. Current efficiency, EQE and color coordinate of two-stacked WOLED are 54.5cd/A, 28.8% and CIExy (0.322, 0.345), respectively. Those of single WOLED are also 20cd/A, 10% and CIExy (0.29, 0.37), respectively. Dual-plate OLED Display (DOD) employing the single WOLED shows high aperture ratio up to 67% in 2-inch panel of which pixel size is equivalent to that of 32 inch Full HD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.998-1001
• /
• 2009

A new flexible TFT backplane structure with improved mechanical reliability is proposed. Amorphous indium-gallium-zinc-oxide (a-IGZO) thin film transistors based on this structure have been fabricated on a polyimide substrate, and the resultant mechanical durability has been evaluated in a cyclic bending test. The panel can withstand 10,000 bending cycles at a bending radius of 5 mm without any noticeable TFT degradation. After 10K bending cycles, the change of threshold voltage, mobility, sub-threshold slope, and gate leakage current were only -0.22V, -0.13$cm^2$/V-s, -0.05V/decade, and $-3.05{\times}10^{-13}A$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1040-1043
• /
• 2009

a-IGZO is an attractive material to make an AMOLED device with uniform TFT properties for use in a large size display. However, this material shows TFT properties that are very sensitive to water or hydrogen. Therefore, it is essential to control these critical factors during fabrication of the backplane in order to improve the TFT performance. In this paper, we report the effect of passivation layer properties on the performance of the oxide TFTs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.123-126
• /
• 2008

We report the improved AMOLED with a-Si TFT backplane based on our unique structure. Our new structure is called Dual-plate OLED Display (DOD). It can also achieve not only higher uniformity of luminance in large-sized display due to low electrical resistance of common electrode but also wider viewing angle.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.127-130
• /
• 2008

A 2.2" QVGA($320{\times}240$) 262,114 color AMOLED module has been developed using digital driving methodology. In this paper, we discuss the development of diver IC which is applied to Digital AMOLED module. Technologies for low cost IC structure and image quality enhancement are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.198-201
• /
• 2006

The optimization of poly-Si TFT process on metal foil for UTL AMOLED was systematically investigated. The improvement in device performance of poly-Si TFT on metal foil was achieved by optimizing the dopant activation condition and gate dielectric structure. Hence, the world first flexible full color 5.6-inch AMOLED with top emission mode on poly-Si TFT stainless steel foil is demonstrated.

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.17-20
• /
• 2010

With the increasing demand for a better FPD image quality, better evaluation metrics and advanced display quality measurement methods are required to meet these needs. There are many measurement methods for evaluating the viewing angle of various display devices, but these methods, which include luminance drop, color shift, and contrast ratio decrease, are imperfect considering that human perception does not completely correlate to them. In this paper, a new method of measuring the perceptual angle of FPDs is proposed, considering human visual perception, which uses the color space of the color appearance model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.979-982
• /
• 2009

With increasing demand for better FPD image quality, better evaluation metrics and advanced display quality measurement methods are required to meet these needs. There are many measurement methods to evaluate viewing angle of the various different display devices. However, these methods, which include luminance drop, color shift, and contrast ratio decrease, are imperfect considering that human perception does not completely correlate to these methods. In this paper, we propose a new method for measuring perceptual angle of FPDs considering human visual perception, which uses color space of the color appearance model.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.489-492
• /
• 2009

We report white OLED with high color temperature based on simple stacked structure for medical display applications. White OLED was fabricated with two emitting materials of fluorescent blue dopant and phosphorescent yellow dopant. We achieved luminance efficiency of 16.2cd/A and CIE color coordinates of (0.305, 0.317) at 10mA/$cm^2$. In particular, the correlated color temperature was higher than 7,000K, enough for display applications.

• Journal of Information Display
• /
• v.13 no.4
• /
• pp.159-166
• /
• 2012

In this paper, a display's emotional image quality can be primarily determined by designing the proper luminance level. Though displays with high luminance are preferred, too much light emission from a display may cause glare or visual fatigue to viewers. To find out the proper luminance level based on various video contents, this study was conducted with an OLED display with a real-black level and a wide color gamut, and with an LCD display with a high luminance level, to set the glare threshold under various conditions. The optimum luminance levels according to the display's loading ratio were found, and the maximum luminance that did not cause a glare in the test is proposed.