• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.379-380
• /
• 2007

The characteristics of a co-sputtered indium zinc tin oxide (IZTO) films prepared by dual target dc magnetron sputtering from IZO and ITO targets at a room temperature are investigated. Film properties, such as sheet resistance, optical transmittance, surface work function and surface roughness were examined as a function of ITO dc power at constant IZO dc power of 100 W. It was shown that the increase of the ITO dc power during co-sputtering of ITO and IZO target resulted in an increase of sheet resistance of the IZTO films. This can be attributed to high resistivity of ITO film prepared at room temperature. Surface smoothness and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The synchrotron x-ray scattering results obtained from IZTO film with different ITO contents showed that introduction of ITO atoms into amorphous IZO film resulted in a crystallization of IZTO film with (222) preferred orientation due to low alc transition temperature of ITO film. However, the transmittance of the IZTO films with thickness of 150 nm is between 80 and 85 % at wavelength of 550 nm regardless of ITO content. Possible mechanism to explain the ITO and IZO co-sputtering effect on properties of IZTO is suggested.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.1
• /
• pp.11-16
• /
• 2001

CuNi alloy films are deposited by co-sputtering of dual targets (Cu and Ni, respectively). Effects of the co-sputtering conditions, such as powers applied to the targets, deposition pressures, and substrate temperatures, on the structural and electrical properties of deposited films are systematically investigated. The composition ratio of Ni/Cu is almost linearly decreased by increasing the DC power applied to the Cu target from 25.6 W to 69.7 W with the RF power applied to the Ni target unchanged(140 W). it is noted that the chamber pressure during deposition and the film thickness give rise to a change of the Ni/Cu ratio within the films deposited. The former may be due to a higher sputtering yield of Cu atom and the latter due to the re-sputtering phenomenon of Cu atoms on the surface of deposited film. The film deposited at higher pressures or at lower substrate temperatures have a smaller crystallite size, a higher electrical resistivity, and much more voids. This may be attributed to a lower surface mobility of sputtered atoms over the substrate.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.153-153
• /
• 2001

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.461-464
• /
• 1995

We have investigated the effects of sputtering Ar gas pressure on magnetic anisotropy of Co/Pt multilayers, where sputtering Ar gas pressure was varied from 2 to 20 mTorr. The surface and volume anisotropies were found to be strongly dependent on sputtering Ar gas pressure. In particular, the surface anisotropy exhibited more than fourfold enhancement as Ar pressure was decreased from 20 to 5 mTorr. We have found that the surface anisotropy was closely correlated with the low-angle x-ray diffraction intensity. We believe that these results are mainly ascribed to the variation of microstructure in the Co/Pt multilayer thin films with sputtering Ar gas pressure.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.158-161
• /
• 2006

[ $Bi_2Sr_2Ca_nCu_{n+1}O_y(n{\geq}0)$ ] thin film is fabricatedvia two different processes using an ion beam sputtering method i.e. co-deposition and layer-by-layer deposition. A single phase of Bi2212 can be fabricated via the co-deposition process. While it cannot be obtained by the layer-by-layer process. Ultra-low growth rate in our ion beam sputtering system brings out the difference in Bi element adsorption between the two processes and results in only 30% adsorption against total incident Bi amount by layer-by-layer deposition, in contrast to enough Bi adsorption by co-deposition.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.252-258
• /
• 2013

In this paper, a thermally stable nickel silicide technology using the co-sputtering of nickel and titanium atoms capped with TiN layer is proposed for nano-scale metal oxide semiconductor field effect transistor (MOSFET) applications. The effects of the incorporation of titanium ingredient in the co-sputtered Ni layer are characterized as a function of Ti sputtering power. The difference between the one-step rapid thermal process (RTP) and two-step RTP for the silicidation process has also been studied. It is shown that a certain proportion of titanium incorporation with two-step RTP has the best thermal stability for this structure.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.767-774
• /
• 1994

The TbFeCo thin films were prepared by the magnetron sputtering system to investigate the effect of the base pressure, film thickness and pre sputtering on the oxidation of the films by analyzing the change of matneto optical properties and by AES depth profile. The films prepared by the facing targets sputtering system represented almost constant magneto optical properties independent of the base pressure resulting from the short flight distance of the sputtered particles. Also, the thin TbFeCo films represented better perpendicular anisotropy as the films thickness increased with pre sputtering. However, it was still needed a deposition rate higher than a certain critical deposition rate to obtain a perfect perpendicular anisotropy even at a very high film thickness.

• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.476-482
• /
• 1995

TbFeCo 박막의 Facing Targets Sputtering System 조건, 조성 및 시효 처리에 따른 광자기적 특성과 산화 특성을 조사하였다. XPS와 AES를 통하여 보호막 없이 제조된 TbFeCo 박막의 표면에는 Co에 우선하여 Tb과 Fe가 안정한 산화물의 형태로 존재하며, 표면에서 3.2nm 깊이부터는 산화되지 않은 TbFeCo 박막이 존재함을 확인하였다. TbFeCo 박막을 시효 시킴에 따라 Fe 산화층의 두께는 거의 변화가 없었으며, Tb Oxide 층만이 증가하였다. TbFeCo 박막은 사용된 기판의 종류나 제조조건에 따라 열적 안정성에 큰 차이를 보였다.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.152-160
• /
• 1993

In this study, we have investigated the influence of sputtering conditions (Ar pressure input powers, substrates) on coercivity and microstructures of GdFe, Co, CoCr thin films produced by the method of DC magnetron sputtering. In GdFe films, we have observed that the Gd atomic ratio was decreased with the deposition rate, and deposition rate decreased with the pressure of Ar gas and the increased linearly with input power. It was also observed that the coercivity of thin films was increased with input power. In Co films, we have investigated the deposition was increased and the Co thin film became finer structure with the increase in the input power, was increased and the Co thin film became finer structure with the increase in the input power, and the deposition rate was decreased with the pressure of Ar gas. In CoCr films, we have investigated the effects of substrates on the coercivity $(H_c)$ and the microstructure. We have found that the substrates plays a crucial role in the microstructure and the coercivity $(H_c)$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.29-29
• /
• 1994