• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.1
• /
• pp.110-118
• /
• 2010

Supercritical treatment of liquefaction technology for rice hull was investigated the biomass conversion rate and evaluated its crude oil in respect to feasibility of burner in order to heat the green house. The reaction was carried out in a 5,000 mL liquefaction system with dispenser and external electrical furnace. Raw materials (160 g) of rice hull and 3,000 mL of different solvents were fed into the reactor. It was observed that the maximum crude oil yield was about 84.4 % with 1-butanol. The calorific value of crude oil from ethanol solvent were 7,752 kcal/kg. Furthermore, in case study of co-solvent with ethanol and bulk-glycerol, it observed that more than 80 % of rice hull was decomposed and liquefied in its solvent at $315{\sim}326^{\circ}C$ for 30 min. For the development of applicable bio-fuel from rice hull, it was considered that its feasibility is necessary to be carried out for co-solvent soluble portions. Regarding to utilize the crude oil into burner as fuel, it was observed that its calorific value was lower at approximately 24 % than the diesel. Also, flame length from crude oil at lower temperature was decreasing due to incomplete incineration. The temperature of warm wind on the burner was maintained between 63 and $65^{\circ}C$, and the temperature of emission line was appeared at $350{\sim}380^{\circ}C$.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.60-67
• /
• 2016

A scale-up test with a continuous solvent extraction and electro-winning system was carried out to separate and recover copper from a synthetic sulfuric acid solution (Cu 10.5 g/L, Co 2.0 g/L, Ni 15.0 g/L, Fe 0.2 g/L). The solution was introduced into mixer-settlers with four stages of extraction and two stages of stripping for continuous countercurrent solvent extraction to separate copper from nickel and cobalt. The loading was carried out using 40% LIX 84-I(v/v) as extractant with a phase ratio of A : O = 1 : 1. Meanwhile, the stripping was undertaken at a phase ratio of A : O = 1 : 1.5 using depleted electrolyte containing 35.0 g/L Cu and 180 g/L $H_2SO_4$ as stripping solution. The extraction and stripping efficiencies were found to be 96.7% and 91.0%, respectively. The copper composition of the stripped solution (pregnant electrolyte) was 50.0 g/L Cu with impurities of 25 ppm nickel, 5 ppm cobalt and 3 ppm iron. In the electro-winning process, copper metal of 99.833 purity was yielded with current efficiency of 98.9% and current density of $1.50A/dm^2$.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.155-158
• /
• 2003

New porphyrin square (1) was prepared by reaction of porphyrin containing pyridine and Re$(CO)_5Cl$ in THF/toluene solvent. 2-(Methylene15-crown-5)-nicotinoly ester(2) was synthesized by reaction of 2-(Hydroxymethyl-15-crown-5 and nicotinoly chloride in $CH_2Cl_2$. In fluorescence quenching studies luminescence was quenched by addition of the guest(2) into host(l). In the host-guest system we could obtain binding constant (K= $1.13{\times}10^{7}M^{-1}$) at decreasing concentration of (2). But the luminescence was dramatically increased after $Na^{+}$ was added into the host-guest system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.133-136
• /
• 2003

New porphyrin square (1) was prepared by reaction of porphyrin containing pyridine and $Re(CO)_5Cl$ in THF/toluene solvent. 2-(Methylenel5-crown-5)-nicotinoly ester(2) was synthesized by reaction of 2-(Hydroxymethyl-15-crown-5 and nicotinoly chloride in $CH_2Cl_2$. In fluorescence quenching studies luminescence was quenched by addition of the guest(2) into host(l). In the host-guest system we could obtain binding constant (K=$1.13{\times}10^7M^{-1}$) at decreasing concentration of (2). But the luminescence was dramatically increased after $Na^+$ was added into the host-guest system.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.171-176
• /
• 1992

Volatile flavor components of Codonopsis lanceolata were extracted by gas co-distillation (GCD), solvent extraction/fractionation (SEF), and headspace sampling (HSS) methods. The extracts were analyzed by dual-capillary gas chromatography-retention index (GC-RI) and gas chromatography-mass spectrometry(GC-MS). The two extracts prepared by SEF and HSS gave more similar fragrance to the Codonopsis lanceolata than the GCD extract. The GC profiles of the SEF and HSS extracts were similar to each other except for differences in peak areas. The extract prepared by SEF gave a sweet note while the extract prepared by HSS gave a green note. The GCD extract began to give a burnt note of herb medicine with prolonged distillation. Rapid extraction of flavor components from Codonopsis lanceolata was possible in several short steps by SEF and HSS methods compared to GCD. GC-MS and GC-RI were used for peak identification. GC-RI was more effective for identification of isomers, and polar FFAP column was more suitable for identification of polar compounds. From Codonopsis lanceolata we identified 35 volatile flavor constituents, 24 of which have not been previously reported by simultaneous distillation extraction method $^{(5)}$. trans-2-Hexanal, cis-3-hexen-1-ol, trans-2-hexen-1-ol, and hexanol were considered key components of the green note and 1-octen-3-ol, the component of the fresh note. Esters, including amyl propionate, seem to be responsible for the sweet note particular to Codonopsis lanceolata.

• YAKHAK HOEJI
• /
• v.44 no.4
• /
• pp.293-299
• /
• 2000

Biodegradable microspheres made from poly-lactide-co-glycolide polymers have been considered as a new delivery system for single-dose vaccine. Purified tetanus toxoid (TT) was encapsulated in poly-lactide(PLA) and poly-lactide-co-glycolide (PLGA) microparticles using a solvent evaporation method in a multiple emulsion system (water-in oil-in water). The morphology of 77-loaded microparticles was spherical and the suface of them was smooth. The particle size was in a range of 2-10. Protein loading efficiency was 68-97.8%. PLGA (85:15) microparticle showed the highest efficiency. Protein release pattern was influenced by polymer molecular weight and composition. The release rate of PLA(Mw 100,000) microsphere was higher than any other microspheres. In consequence of the hydrolysis of PLGA(50:50) microspheres, environmental pH decreased from 7.4 to 5.0. The PLA, PLGA (75:25) and PLGA (85:15) microshperes showed no significant pH change. The antigenicity or n in microshperes was assayed by indirect sandwich ELISA using equine polyclonal tetanus antitoxin for capture antibody and human polyclonal tetanus antitoxin for primary antibody. The antigenicity of TT in PLA (Mw 100,000), PLGA(50:50, Mw 100,000) and PLGA (75:25, Mw 73,300) after 30 days incubation showed 54, 40.9 and 76.7%, respectively.

• Journal of Pharmaceutical Investigation
• /
• v.41 no.4
• /
• pp.239-247
• /
• 2011

Simvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase, which catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin has good permeability, but it also has low solubility (BCS class II), which reduces its bioavailability. To overcome this problem, a solid dispersion is formed using a spray-dryer with polymeric material carrier to potentially enhance the dissolution rate and extend drug absorption. As carriers for solid dispersion, Gelucire$^{(R)}$44/14 and Gelucire$^{(R)}$ 50/13 are semisolid excipients that greatly improve the bioavailability of poorly-soluble drugs. To avoid any toxic effects of an organic solvent, we used aqueous medium to melt Tween$^{(R)}$ 80 and distilled water. The structural behaviors of the raw materials and the solid dispersion were analyzed by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM). The DSC and PXRD data indicated that the crystalline structure of simvastatin was transformed to an amorphous structure through solid dispersion. Then, solid dispersion-based tablets containing 20 mg simvastatin were prepared with excipients. Dissolution tests were performed in distilled water and artificial intestinal fluid using the USP paddle II method. Compared with that of the commercial tablet (Zocor$^{(R)}$ 20 mg), the release of simvastatin from solid dispersion based-tablet was more efficient. Although the stability study is not complete, this solid dispersion system is expected to deliver poorly water-soluble drugs with enhanced bioavailability and less toxicity.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.334-340
• /
• 2003

In order to fabricate new sustained delivery device of nerve growth factor (NGF), we developed NGF-loaded biodegradable poly(L-lactide-co-glycolide) (PLGA, the mole ratio of lactide to glycolide 75:25, molecular weight: 83,000 and 43,000 g/mole, respectively) film by novel and simple sandwich solvent casting method for the possibility of the application of neural tissue engineering. PLGA was copolymerized by direct condensation reaction and the molecular weight was controlled by reaction time. Released behavior of NGF from NGF-loaded films was characterized by enzyme linked immunosorbent assay (ELISA) and degradation characteristics were observed by scanning electron microscopy (SEM) and gel permeation chromatography (GPC). The bioactivity of released NGF was identified using a rat pheochromocytoma (PC-12) cell based bioassay. The release of NGF from the NGF-loaded PLGA films was prolonged over 35 days with zero-order rate of 0.5-0.8 ng NGF/day without initial burst and could be controlled by the variations of molecular weight and NGF loading amount. After 7 days NGF released in phosphate buffered saline and PC-12 cell cultured on the NGF-loaded PLGA film for 3 days. The released NGF stimulated neurite sprouting in cultured PC-12 cells, that is to say, the remained NGF in the NGF/PLGA film at 37 $^{\circ}C$ for 7 days was still bioactive. This study suggested that NGF-loaded PLGA sandwich film is released the desired period in delivery system and useful neuronal growth culture as nerve contact guidance tube for the application of neural tissue engineering.

• Applied Chemistry for Engineering
• /
• v.35 no.1
• /
• pp.48-53
• /
• 2024

We predicted the calendar aging and long-term lifetime of lithium-ion batteries using an electrochemical-based SEI growth model. Numerical simulation was carried out employing the four different long-term SEI growth models (i.e., solvent diffusion limited model, electron migration limited model, Li-interstitial diffusion limited model, reaction limited model), and we calculated the capacity fade and loss of lithium inventory during calendar aging. The result showed that the electron migration limited model and Li-interstitial diffusion limited model showed lower capacity fade, while the solvent diffusion limited model and reaction limited model reached 80% of capacity fade within 10 years. During calendar aging, the lower storage temperature showed less capacity fade due to the hindrance of SEI growth rate. During cycling, the higher C-rate showed a shorter life cycle; however, the differences were not significant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1502-1511
• /
• 2013

In this study, simulation works have been performed for the modeling of $CO_2$ removal process contained in the DME production process through an absorber-stripper system using methanol aqueous solution. Aspen Plus release 7.3 in AspenTech company was utilized as a simulation tool and PC-SAFT modeling equation of state was used as a thermodynamic model. Fitting parameters built-in PC-SAFT model was determined by regressing experimental data, predicted results using PC-SAFT model were compared with experimental data in order to verify the exactness of the thermodynamic model. Optimization works have been performed to reduce the utility consumptions using solvent circulation rate, column operating pressure and feed stage location as manipulated variables.