• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.294-299
• /
• 2008

The enforcement of the Kyoto Protocol to reduce greenhouse gas is definitely a challenge we cannot avoid. Korea ranks 10th in the world and 1st among OECD countries in terms of the volume of greenhouse gas emission and is expected to join Annex I countries which have to reduce emission after 2012. For the sustainable development, we shouldn't depend upon fossil fuel energy longer. This study will provide preliminary data to developing renewable energy systems for urban generation. There are investigated a recent case study of CONCERTO projects co-funded by the European Commission and analyzed application of renewable energy systems as a urban energy source.

• Journal of Drive and Control
• /
• v.17 no.3
• /
• pp.26-32
• /
• 2020

In modern society, the energy-saving problem of industrial vehicles is economically and environmentally critical. Energy savings using the potential energy of forklifts are one of the viable solutions to resolving this problem. The basic concept of this study is to operate the hydraulic motor and recharge the battery using the flow rate from the cylinder when loading heavy objects and lowering the fork. To save energy, the torque and rotational speed of the generator should be optimized according to the load and descent speed to increase efficiency. To this end, we propose a system that optimizes energy saving efficiency by controlling the swashplate angle of the variable hydraulic motor through the GA(Genetic-Algorithm). The results were verified by building and comparing fixed motor models and variable motor models using the AMEsim. The results of the study show that the proposed optimized swashplate angle increases the energy saving efficiency by approximately 6%-8%, depending on the working conditions.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.349-354
• /
• 2009

In this study, a bubbling fluidized-bed reactor was used to study $CO_2$ capture from flue gas using a potassium-based dry sorbent. A dry sorbent, manufactured by the Korea Electric Power Research Institute, consists of 35% of $K_2CO_3$ for $CO_2$ absorption and 65% of supporters for mechanical strength. $H_2O$, a reactant of the carbonation reaction, was supplied in the reactor as a form of saturated water vapor at a given temperature. The experiment of the regeneration reaction was performed by raising up to a given temperature using $N_2$ as a fluidization gas. It was indicated that sorption capacity and regenerability of dry sorbents showed high-efficiency at $1.97\;mol\;H_2O/mol\;CO_2$ and $400^{\circ}C$, respectively. The regenerated sorbent samples were analyzed by TGA to confirm the extent of the reaction. When the regeneration temperature was $150^{\circ}C$, the regenerability of dry sorbents was about 60%, which was capable of applying those sorbents to a two-interconnected fluidized-bed reactor system with continuous solid circulation. The results obtained in this study can be used as basic data for designing and operating a large scale $CO_2$ capture process with two fluidized-bed reactors.

• Implantology
• /
• v.18 no.2
• /
• pp.120-138
• /
• 2014

Purpose: The purpose of this study was to review the outcomes of a series of studies on tissue regeneration conducted in multiple institutions including the Department of Periodontology, College of Dentistry, Yonsei University. Materials and Methods: Studies were performed divided into the following three subjects; 1) Development of three-dimensional nano-hydroxyapatite (n-HA) scaffold for facilitating drug release and cell adhesion. 2) Synergistic effects of bone marrow-derived mesenchymal stem cells (BMMSC) application simultaneously with platelet-rich plasma (PRP) on HA scaffolds. 3) The efficacy of silk scaffolds coated with n-HA. Also, all results were analyzed by subjects. Results: Hollow hydroxyapatite spherical granules were found to be a useful tool for the drug release and avidin-biotin binding system for cell attachment. Also, BMMSC simultaneously with PRP applied in an animal bone defect model was seen to be more synergistic than in the control group. But, the efficacy of periodontal ligament cells and dental pulp cells with silk scaffolds could not be confirmed in the initial phase of bone healing. Conclusion: The ideal combination of three elements of tissue engineering-scaffolds, cells and signaling molecules could be substantiated due to further investigations with the potentials and limitations of the suggested list of studies.

• Clean Technology
• /
• v.19 no.4
• /
• pp.437-445
• /
• 2013

To develop SEWGS (sorption enhanced water gas shift) system using dry $CO_2$ absorbent for pre-combustion $CO_2$ capture, hydrodynamic characteristics of $CO_2$ absorbents were measured and investigated. The minimum fluidization velocity of $CO_2$ absorbent was measured and the effects of the operating conditions were investigated to operate the system at bubbling fluidized bed condition. The minimum fluidization velocity decreased as pressure and temperature increased. Moreover, the minimum fluidization velocity decreased as column diameter increased. The effects of operating conditions on the solid circulation rate were measured and investigated to select appropriate operating conditions for continuous $CO_2$ capture and regeneration. The measured solid circulation rates were ranged between 10 and 65 kg/h and increased as the solid injection velocity, gas velocity in the regeneration reactor, and solid height increased.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.367-374
• /
• 2007

This study was carried out to establish the micropropagation system of Bupleurum latissimum Nakai that is a Korean native endangered species. Callus were induced from the leaf, petiole and floral bud and the percentage of callus formation was highest in the floral bud on the MS medium containing 2.0 mg ${\cdot}$ $L^{-1}$ 2,4-D. Especially, callus induced from floral bud was formed 77.8% and the percentage of shoot formation was 42.6% on the MS medium containing 2.0 mg ${\cdot}$ $L^{-1}$ 2,4-D plus 1.0 mg ${\cdot}$ $L^{-1}$ TDZ. For simultaneously callus formation and shoot regeneration, 1/2 MS medium was more effective than MS medium. The percentage callus formation, shoot regeneration and rooting were 46.3%, 13.0%, 13.0% in 1/2 MS medium, respectively. Soot regeneration from callus was good in 1/2 MS medium supplemented with 2.0 mg ${\cdot}$ $L^{-1}$ 2,4-D plus 1.0 mg ${\cdot}$ $L^{-1}$ BA where percentage of shoot regeneration was 74.1 %, and the number of shoot per explant was 2.4. The percentage of rooting was lowest (57.8%) in control while it was highest (97.8%) in 1.5 mg ${\cdot}$ $L^{-1}$ NAA. In acclimatization of regenerated plantlets, the percentage of survived plantlets was highest (86.1%), and plant height, root length and fresh weight were good in the soil for horticulture.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.522-529
• /
• 2014

Circulating fluidized bed system consists of SEWGS reactor - lower loop seal - regeneration reactor - riser - cyclone - upper loop seal has been used for solid circulation between the SEWGS reactor and the regeneration reactor in a SEWGS system for pre-combustion $CO_2$ capture. A vertical type lower loop seal has been used in current system but this lower loop seal requires high gas flow rate through the lower loop seal for fluidization and smooth solid circulation, and consequently, causes slugging behavior sometimes. To overcome these disadvantages, inclined type lower loop seal was proposed by this study. Solid circulation characteristics with change of lower loop seal geometry were measured and compared in a bubbling - bubbling - riser type circulating fluidized bed using $CO_2$ absorbent (P-78) as bed material at ambient temperature and pressure. We could conclude that the inclined lower loop seal is better than the vertical type lower loop seal from the viewpoints of minimum flow rate requirement for stable solid circulation and solid height change during solid circulation.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.197-202
• /
• 2007

This research was basically carried out to extend the application of $CO_2$ absorption processes for flue-gas system, which are mainly applied to a reforming process in petro-chemical industries. In general, MEA absorbent has some problems in flue-gas treatment, such as, degradation, regeneration energy and absorption capacities. As we known, sterical hindered amine, typically AMP (2-amino 2-methyl 1-propanol), have a good potential to improve these problems. In this paper, the characteristics of $CO_2$ absorption in aqueous AMP solution were measured and compared with that of MEA. It has been found that the $CO_2$ absorption capacity in AMP is double than that of MEA in the low $CO_2$ partial pressure system such as flue-gas. Also, the equilibriums of $CO_2$-AMP system were partially suggested, which are essentially needed to design the absorption process.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.4
• /
• pp.221-225
• /
• 2001

Some factors of wounding methods, solidifying agents, origin of leaf explants, cone. of acetosyring-one, and MES affecting regeneration and transformation by Agrobacterium tumefaciens were investigated to establish an efficient transformation system of apple. Wounding by cutting the leaves merely showed the tendency of regeneration and transformation with higher efficiency compared with that of wounding by non-traumatic forcep when carrying out co-cultivation for three days after bacterial inoculation. While examining the solidifying agents of medium with the combination of agar (A)＋Gelrit $e^{ }$ (G) in g. $L^{-1}$ , the higher concentration of Gelrit $e^{ }$ increased the efficiency of regeneration. However, there was no difference in the efficiency of transformation from the treatments of 2.5 G, 3.5 A+1.2 G, and 7.0 G. The origin of leaf explants showed no difference statistically in the efficiency of regeneration and transformation, but that from the shoots of proliferation medium showed the tendency with higher efficiency. The concentration of above 0.1 mM acetosyringon had an increase in the efficiency of regeneration and transformation and the concentration of 0.15 mM had the highest efficiency of transformation in the treatment of acetosyringone with different concentration. There was no effect of MES on regeneration and transformation.ion.

• Journal of Plant Biotechnology
• /
• v.36 no.2
• /
• pp.193-196
• /
• 2009

Pinellia koreana K-H Tae & J-H Kim is a recently discovered Korea endemic medicinal plant species whose natural habitat is rapidly destroyed by industrial development. Described in this paper are culture conditions for high frequency plant regeneration via bulblet formation from leaf explant cultures of P. koreana. Leaf explants formed white nodular structures and off-white calluses at a frequency of 91.2% when cultured on MS medium supplemented with 2 mg/L BA and 0.5 mg/L NAA. However, the frequency of white nodular structures and off-white calluses formation was slightly decreased with an increasing concentration of NAA up to 4 mg/L, where the frequency reached 31.7%. Most petiole explants did not form white nodular structures and off-white calluses except the combination treatment of 2 mg/L BA and 2 mg/L NAA. Upon transfer onto MS basal medium, over 90% of nodular structures gave rise to numerous bulblets and developed into plantlets. Plantlets regenerated from bulblets were transplanted to potting soil and grown to maturity at a survival rate of over 95% in a growth chamber. Therefore, the in vitro plant regeneration system of P. koreana obtained in this study will be useful for mass propagation and long-term preservation of genetic resources of P. koreana.