• 한국환경과학회지
• /
• 제26권1호
• /
• pp.1-10
• /
• 2017

In this study, poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/graphene oxide (GO) nanocomposite films containing various content of GO were prepared using solution casting method. The effect of GO content on Young's modulus and dispersion of GO in PHBV matrix was investigated. Also, the thermomechanical properties, oxygen transmission rates and hydrolytic degradation of PHBV/GO nanocomposite films were studied. The addition of GO into PHBV improves the Young's modulus and decreases thermal expansion coefficient. The improvement can be mainly attributed to good dispersion of GO and interfacial interactions between PHBV and GO. Furthermore, PHBV/GO nanocomposite films show good oxygen barrier properties. PHBV/GO nanocomposites show lower hydrolytic degradation rates with increasing content of GO.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권3호
• /
• pp.89-96
• /
• 2013

1990년대 후반부터 사용된 폴리머 콘크리트로 제작된 맨홀은 이 맨홀이 가지고 있는 다양한 장점 때문에 현재까지 널리 이용되고 있다. 그러나, 고유가 시대로 접어들면서 석유화학 재료의 가격인상과 더불어 폴리머 콘크리트의 제조원가가 상승되고 이에 따른 폴리머 콘크리트의 약점이 대두되고 있다. 따라서, 고가의 폴리머 콘크리트로 제작된 맨홀의 뛰어난 휨강도를 대체할 수 있는 경제적인 시멘트 콘크리트 맨홀의 개발이 요구되어 왔다. 본 연구에서는 비정질 칼슘알루미네이트 (Armorphous calcium aluminate, ACA)계의 속경형 시멘트기술을 기반으로 플라이 애쉬와 고로슬래그, 실리카 퓸, 메타카올린 등의 산업부산물을 이용하여 시멘트의 사용량을 최소화시킴으로써 $CO_2$를 저감시킬 수 있는 친환경적인 맨홀용 고인성 콘크리트를 개발하고자 하였다. 연구결과, 경제적이고 친환경적이면서도 요구성능을 만족시키는 시멘트 콘크리트 맨홀을 개발하였다.

• Elastomers and Composites
• /
• 제24권4호
• /
• pp.276-289
• /
• 1989

This study deals with both effects of inorganic fillers to vulcanized rubbers such as NR, CR, EPDM, NBR & SBR and inorganic characteristics of domestic fillers in comparision with hard clay produced in the USA. The results were as follows. 1. Main ingredient of domestic clay "Ha-dong clay" was Halloysite, "No-ha Island" was Pyrophyllite with $\alpha$-Quartz, and both of "Hard clay" & "Hwa-soon clay" were proved to be Kaolinite by XRD, DT-TGA and chemical analysis by XRF. 2. Tensile strength value of SBR compounded with these fillers, was Hard clay $146kg\;f/cm^2$, Kaolinite $123kg\;f/cm^2$, Pyrophyllite $82kg\;f/cm^2$, Halloysite $80kg\;f/cm^2$, precipitated $CaCO_3\;27kg\;f/cm^2$, and ground $CaCO_3$ was $21kg\;f/cm^2$. These results showed the increase of seven times according to filler species. 3. The physical properties of non-crystalline rubbers, such as SBR, NBR & EPDM, compared with NR & CR, have been considerably changed according to crystalline phase, particle size, shape and surface structure of fillers. Especially, tensile strength value in case of SBR & EPDM, was differentiated about 1.5 times by the particle size of fillers. 4. In SBR, physical properties of rubber compounded with Kaolinite which was surface treated with fatty acid and silane, almost approach to the value of hard clay. 5. Delayed cure time of Kaolinite and decrease of rubber properties by $CaCO_3$ can be improved by blending kaolinite & $CaCO_3$ in the ratio of 2:1.

• 마이크로전자및패키징학회지
• /
• 제12권4호통권37호
• /
• pp.359-363
• /
• 2005

유기 박막트랜지스터 (OTFT)를 제작하기 위하여 게이트 절연막으로서 PVP 계통의 유기막을 갖는 MIM(metal-insulator-metal)구조의 유기 절연층 소자를 제작하였다. 유기 절연층의 형은 ITO/Glass 기판위에 polyvinyl 계열의 PVP(poly-4-vinylphenol)를 용질로, PGMEA (propylene glycol monomethyl ether acetate)를 용매로 사용하여 co-polymer PVP를 제조하였다. 또한 열경화성 수지인 poly(melamine-co-formaldehyde)를 경화제로 사용하여 cross-linked PVP 절연막을 합성하였다. 유기 절연층의 전기적 특성은 co-polymer PVP 소자에 비해 cross-link 방식으로 제조된 소자에서 약 300 pA의 낮은 누설전류와 상대적으로 낮은 잡음전류의 특성을 나타내었다. 또한 cross-linked PVP 절연막에서 보다 양호한 표면형상 (거칠기)이 관찰되었으며 정전용량 값은 약 0.11${\~}$0.18 nF의 값을 나타내었다.

• Macromolecular Research
• /
• 제16권6호
• /
• pp.510-516
• /
• 2008

New antitumor active polymers, poly(methacryloyl-2-oxy-1,2,3-propanetricarboxylic acid-co-exo-3,6-epoxy-l,2,3,6-tetrahydrophthalic acid) [poly(MTCA-co-ETAc)], poly(methacryloyl-2-oxy-l,2,3-propanetricarboxylic acid-co-hydrogen ethyl-exo-3,6-epoxy-l,2,3,6-tetrahydrophthalate) [poly(MTCA-co-HEET)], and poly(methacryloyl-2-oxy-l,2,3-propanetricarboxylic acid-co-a-ethoxy-exo-3,6-epoxy-1,2,3,6-tetrahydrophthaloyl-5-fluorouracil) [poly(MTCA-co-EETFU)] were synthesized and characterized. Their antitumor activity, inhibition of DNA replication and antiangiogenesis were examined. The structures of the polymers were identified by FT-IR, $^1H$ and $^{13}C$-NMR spectroscopy. The number average molecular weights of the fractionated polymers determined by GPC ranged from 9,400 to 14,900, and polydispersity indices were less than 1.7. The in vitro cytotoxicity of these polymers was determined and their antitumor activity was evaluated. The $IC_{50}$ values (the drug concentration at inhibition of 50% tumor growth) indicated that the synthesized polymers were much better inhibitors of cancer cells and showed lower cytotoxicity than the free 5-FU. The in vivo antitumor activity of the conjugates was examined using mice bearing the sarcoma 180 tumor cell line. The life spans (TIC) of the mice treated with the conjugates were higher than those treated with the free 5-FU. In addition, the synthesized conjugates showed excellent antiangiogenic activity based on an embryo chorioallantoic membrane assay.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.47-50
• /
• 1997

We synthesized N-Hydroxysuccinimidyl (NHS) azidobenzoate as a cross-linking reagent for immobilization of peptide onto the solid surface. Thin polystyrene(PS) films spin-coated with a NHS azidobenzoate solution were exposed with ultraviolet light at 245nm$(3.3mW/cm^2)$ for 5 min. The NHS active ester groups became covalently attached to the polymer via photogenerated, highly reactive nitrene intermediates derived from NHS azidobenzoate. Using this technique, it is demonstrated that well-defined surface regions can be functionalized with a minimum observable feature size of 1mm for UV exposure. Through reaction of this functionalized PS surface with primary amine-containing biomolecules, biological molecule had been immobilized on the polymer surface.

• Journal of Magnetics
• /
• 제15권1호
• /
• pp.12-16
• /
• 2010

Combined study of in-situ stress measurements and atomic force microscopy (AFM) revealed drastic stress relaxation in the CoCrPt and PS(styrene)-PVP(vinyl pyridine) polymer hybrid structure that was closely related to the growth structure of the film. We have observed not only no large initial growth stress at the initial stages of film growth but also twice smaller stress in magnitude with opposite sign in the CoCrPt/PS-PVP/Si sample. The microstructural studies using AFM at the various film growth stages revealed that the film growth structure plays an important role in the stress relaxation mechanism of CoCrPt films on a corrugated polymer surface.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.411-417
• /
• 2023

During the operation of a nuclear power plant (NPP), the generation of radioactive waste, including dry active waste (DAW), concentrates, spent resin, and filters, mandates the implementation of appropriate disposal methods to adhere to Korea's waste acceptance criteria (WAC). In this context, this study investigates the potential use of polymer concrete (PC) as a high-integrity container (HIC) material for solidifying and packaging these waste materials. PC is a versatile composite material comprising binding polymers, aggregates, and additives, known for its exceptional strength and chemical stability. A comprehensive analysis of PC's long-term integrity was conducted in this study. First, its compressive strength, which is crucial for ensuring the structural stability of HICs over extended periods, was evaluated. Subsequently, the resilience of PC was tested under various stress conditions, including biological, radiological, thermal, and chemical stressors. The findings of this study indicate that PC exhibits remarkable long-term properties, demonstrating exceptional stability even when subjected to diverse stressors. The results therefore underscore the potential viability of PC as a reliable material for constructing high-integrity containers, thus contributing to the safe and sustainable management of radioactive waste in NPPs.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.88-89
• /
• 2003

A series of novel spinning acrylic polymer containing silk protein were synthesized by copolymerization of acrylonitrile (AN) and silk fibroin peptide (SFP) modified by acryloyl chloride (AC) with vinyl groups. The viscosity values of these copolymers showed that the copolymers have good spinnability, which are synthesized under the condition of putting a micro amount of metal ions into synthesizing solvent. The fiber based on the poly (AN-co-SFP) was prepared and characterized by SEM, FTIR measurement of its shell and core flakes, and moisture absorption. The fiber appeared a smooth surface and could be assumed to have excellent adhesive between SFP and PAN. Furthermore, these fibers showed a shell-core structure and excellent moisture absorption.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.252-254
• /
• 2002

In this study, polyurethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte, and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/MCF cells were also prepared and their performances depending on discharge currents and temperatures were evaluated. ionic conductivity of the gel polymer electrolyte with PUA at room temperature and -20$^{\circ}C$ was ca. 4.5 x 10$\^$-3/ S/cm and 1.7${\times}$10$\^$-3/ S/cm, respectively. GPE was stable electrochemically up to 4.5 V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/MCF cell showed a good high-rate and a low-temperature performance.