• Journal of Powder Materials
• /
• v.21 no.2
• /
• pp.108-113
• /
• 2014

Flake-like $LiCoO_2$ nanopowders were fabricated using electrospinning. To investigate their formation mechanism, field-emssion scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were carried out. Among various parameters of electrospinning, we controlled the molar concentration of the precursor and the PVP polymer. When the molar concentration of lithium and cobalt was 0.45 M, the morphology of $LiCoO_2$ nanopowders was irregular and round. For 1.27 M molar concentration, the $LiCoO_2$ nanopowders formed with flake-like morphology. For the PVP polymer, the molar concentration was set to 0.011 mM, 0.026 mM, and 0.043 mM. Irregular $LiCoO_2$ nanopowders were formed at low concentration (0.011 mM), while flake-like $LiCoO_2$ were formed at high concentration (0.026 mM and 0.043 mM). Thus, optimized molar concentration of the precursor and the PVP polymer may be related to the successful formation of flake-like $LiCoO_2$ nanopowders. As a results, the synthesized $LiCoO_2$ nanopowder can be used as the electrode material of Li-ion batteries.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.4
• /
• pp.123-128
• /
• 2016

In this study, poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP)-based gel polymer electrolyte incorporating nano-size $Al_2O_3$ ceramic particle was prepared by electrospinning. The gel polymer electrolyte (GPE) incorporated with $Al_2O_3$ ceramic particle showed higher ionic conductivity of $9.5{\times}10^{-2}Scm^{-1}$ than pure PVdF-HFP GPE without ceramic particle and improved the electrochemical stability up to 5.2 V. The GPEs were assembled with $LiNi_{1/3}Mn_{1/3}Co_{1/3}O_2$ (NMC) cathode for electrochemical test. The GPE batteries at 0.1 C-rate delivered $168.2mAh\;g^{-1}$ for pure GPE and $189.6mAh\;g^{-1}$ for hybrid GPE, respectively. Therefore, the incorporation of high dielectric constant ceramic particle will be good strategy to enhance the stability and electrochemical properties of lithium ion gel polymer batteries.

• Polymer Science and Technology
• /
• v.15 no.6
• /
• pp.713-719
• /
• 2004

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.317-321
• /
• 2003

In order to prepare a prodrug, poly(polyethylene glycol methacrylate-co-methacryloyloxymethyl-5-fluorouracil) (poly(PEGM-co-MAOFU)) prodrug particles were prepared by precipitation polymerization of MAOFU and PEGM in polyacrylic acid solution. The size of prodrug particles were 0.2-0.35 ${\mu}{\textrm}{m}$. The antitumor activity of prodrugs against sarcoma-l80 tumor cell in mice was demonstrated and the polymer particles themselves showed low toxicity and good biocompatibility when they were administrated into mice.

• Polymer Science and Technology
• /
• v.3 no.6
• /
• pp.475-480
• /
• 1992

• Polymer Science and Technology
• /
• v.9 no.5
• /
• pp.389-393
• /
• 1998

• Polymer Science and Technology
• /
• v.7 no.4
• /
• pp.377-383
• /
• 1996

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.2
• /
• pp.198-207
• /
• 1996

It is well known that drag reduction in single phase liquid flow is affected by polymer material, molecular weight, polymer concentration, pipe diameter, and flow velocity. Drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to present cavitation which occurs in pump impellers. But the research of drag reduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction, mean liquid velocity, and turbulent intensity whether polymer is added in the horizontal two phase system or not. Experiment has been conducted in a test section with the inner diameter of 24mm and the length of 1,500mm. The polymer materials used are two kinds of polyacrylamide[PAAM] and co-polymer[A611P]. The polymer concentration was varied with 50, 100 and 200 ppm under the same experimental conditions. Experimental results showed that the drag reduction of co-polymer is higher than that of polyacrylamide. Mean liquid velocities increased as polymer was added, and turbulent intensity decreased inversely near the pipe wall.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.557-564
• /
• 2005

Thermoplastic starch (TPS) was manufactured and blended with poly(butylene adipate-co-succinate) (PBAS), which is one of the most popular biodegradable aliphatic polyesters. The effects of the TPS contents on the mechanical properties, thermal characteristics, and biodegradability of PBAS/TPS blends were investigated. The foaming characteristics of those were also studied. With small amount of TPS, mechanical properties of the blends were largely deteriorated and the variations of them decreased with more addition of TPS. In addition, TPS decreased crystallinity and thermal decomposition temperature of PBAS. The PBAS/TPS foam having maximum blowing ratio was obtained with 20 Phr of TPS, and their blowing ratio decreased with the further increase of TPS.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3279-3284
• /
• 2012

Poly(benzimidazole-co-benzoxazole)s (PBI-co-PBO) are synthesized by polycondensation reaction with 3,3'-diaminobenzidine, terephthalic acid and 3,3'-dihydroxybenzidine or 4,6-diaminoresorcinol in polyphosphoric acid (PPA). All polymer membranes are prepared by the direct casting method (in-situ fabrication). The introduction of benzoxazole units (BO units) into a polymer backbone lowers the basic property and $H_3PO_4$ doping level of the copolymer membranes, resulting in the improvement of mechanical strength. The proton conductivity of $H_3PO_4$ doped PBI-co-PBO membranes decrease as a result of adding amounts of BO units. The maximum tensile strength reaches 4.1 MPa with a 10% molar ratio of BO units in the copolymer. As a result, the $H_3PO_4$ doped PBI-co-PBO membranes could be utilized as alternative proton exchange membranes in high temperature polymer electrolyte fuel cells.