• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.550-552
• /
• 2003

We prepared $Co_{77}Cr_{20}Ta_3$ Magnetic layer for perpendicular magnetic recording media with introduce Two-step methode and Amorphous Si Underlayer on slide glass substrate. The thickness of magnetic layer were 100nm, and Underlayer were varied from 5 to 100 nm. The multi layer Properties of crystal structure were examined with XRD. Prepared thin films showed improvement of dispersion angle of c-axis orientation ${\Delta}{\theta}_{50}$ caused by inserting Buffer-layer and amorphous Si underlayer.

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.418-422
• /
• 1998

The Co-Cr films are one of the most suitable candidates for perpendicular magnetic recording media. The facing targets sputtering(FTS) system has a advantage of preparing films over a wide range of working gas pressure on plasma-free substrate. In this study, we investigated the possibility of employing FTS system for depositing Co-Cr films. The Co-Cr thin films were deposited with various sputter gas pressure($P_Ar$, 0.1~10mTorr) by using FTS apparatus at temperature of $40^{\circ}C and 220^{\circ}C$, respectively. Crystallographic and magnetic characteristics were evaluated by x-ray diffractometry (XRD) and vibrating sample magnetometer(VSM), respectively. Under argon gas pressure at 0.1mTorr, films with morphologically dense microstructure, good c-axis orientation and higher coercivity were obtained. It has been confirmed that the FTS system is very useful for preparing Co-Cr thin film recording media.

• 한국전자현미경학회:학술대회논문집
• /
• 한국현미경학회 1996년도 제27회 춘계학술대회
• /
• pp.75-76
• /
• 1996

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1996년도 춘계연구발표회 논문개요집
• /
• pp.24-25
• /
• 1996

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1832-1835
• /
• 2005

This paper presents the steering control algorithm of an up and down motion robot using a quaternion. The up and down motion robot is to be moved on an irregular floor that can inevitably result in the errors of both position and orientation. Especially the orientation error should be compensated every work in order to adjust the misaligned values of current orientation to those commanded values. In this paper, we propose a new steering control algorithm between the two values by using a quaternion with spherical cubic interpolation. The proposed algorithm is shown to be effective in terms of vibration when compared to a conventional simple compensation without interpolation, by using $MATLAB^{(R)}$ and $VisualNastran4D^{(R)}$

• 서비스연구
• /
• 제4권1호
• /
• pp.1-19
• /
• 2014

Every organization needs to maintain its long-term effectiveness through the positive perceptions, attitudes, and behaviors of its members. Customer orientation, job satisfaction, and organizational citizenship behavior (OCB) are the important functioning aspects for the long-term organizational effectiveness. The purpose of this study is to investigate the impact of service-worker's customer orientation on OCB within Korean bank and insurance sector by analyzing the relationship of constructs in the conceptual model. To achieve research objectives, survey method is employed. Findings of this research reveal that both need and enjoyment dimension of CO are very important in predicting OCB. We sent 220 questionnaires to service workers of the bank and insurance then received 200 valid responses. The research was conducted in bank and insurance agency in J city. The choice of these two types of organizations was dictated by the fact that they have large number of service worker with diverse background at multiple levels in these industries. Results also indicated that the moderating effect of pay satisfaction on the relationship between their OCB and CO had a weak effect.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.230-242
• /
• 2022

The purpose of this study was to verify the effectiveness of the computerized cognitive rehabilitation program in which areas and to suggest effective ways to utilize the program in the future, being conducted for 20 college students. We lasted this study from May 3 to 23, 2021. As a result of analyzing the groups using the Computer-based Cognitive Rehabilitation Program (CoTras), in terms of the difference in accuracy for the case of visual perception group B was statistically significantly improved than group C(p<0.05). In the case of attention, memory, and orientation, there was no significant difference between groups(p>0.05). In the case of reaction time difference, there was no significant difference between groups in visual perception, concentration, memory, and orientation(p>0.05). And in order to improve attention and visual perception, it is recommended to conduct the program three times with a duration of 20 minutes, and in order to improve orientation and memory, it can be said that it is helpful to conduct one experiment for at least 30 minutes rather than conducting short and frequent experiments. Through this study, we found that it is effective to apply different times according to each area to improve cognitive function. In other words, depending on the purpose of which cognitive function is to be improved, the duration of the program should be applied differently.

• 한국표면공학회지
• /
• 제53권1호
• /
• pp.1-8
• /
• 2020

Sulfamate-chloride baths were fabricated to study the properties of the electrodeposited Ni and NiCo thin films. The dependences of current efficiency, deposit composition of Ni and Co, residual stress, surface morphology and microstructure of electrodeposited Ni and NiCo thin films on CoCl₂ concentration in sulfamate-chloride baths were investigated. The current efficiency was measured to be more than about 90%, independent of the changes of CoCl₂ concentration in the baths. Residual stress of Ni and NiCo thin films was increased from about 45 to about 250 MPa with varying CoCl₂ concentration from 0 to 0.210 M CoCl₂ in the baths and then reached to a plateau, about 250 MPa above 0.420 M CoCl₂ concentration. Nodular surface morphologies were observed at most CoCl₂ concentrations in the baths except 0.210 M. NiCo thin film electrodeposited from the bath with 0.210 M CoCl₂ concentration showed an acicular surface morphology. Pure Ni thin film consists of FCC(111), FCC(200), FCC(220), and FCC(311) peaks without any preferred orientation. On the other hand NiCo thin films make up of HCP(100), FCC(111), HCP(101), FCC(200), FCC(220) or HCP(110), FCC(311) or HCP(112) and FCC(222) peaks. It was revealed from the analysis of XRD result that FCC(111) peak at the NiCo thin film electrodeposited from the bath with 0.084 M CoCl₂ concentration can be regarded as the preferred orientation. However the peak of the preferred orientation was changed to FCC(220) or HCP(110) above 0.084 M CoCl₂ concentration in the baths. Then the intensity of FCC(220) or HCP(110) peak was gradually decreased with increasing CoCl₂ concentration further. The crystalline size of pure Ni thin film was observed to be about 53 ㎛ and those of NiCo thin films were in the range of 35~45 ㎛.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.44-55
• /
• 2020

The degree of mutual understanding between nursing students and instructors regarding simulation-based education remains unknown. The purpose of this study was to identify the subjectivity of nursing students and instructors about simulation-based learning, and was intended to expand the mutual understand by employing the co-orientation model. Q-methodology was used to identify the perspectives of 46 nursing students and 38 instructors. Perception types found among students in relation to simulation-based learning were developmental training seekers, instructor-dependent seekers, and learning achievement seekers. The instructors estimated the student perception types as passive and dependent, positive commitment, demanding role as facilitators, and psychological burden. Perception types found among instructors included nursing capacity enhancement seekers, self-reflection seekers, and reality seekers. The students classified the instructors' perception types as nursing competency seekers, learning reinforcement seekers, and debriefing-oriented seekers. As a result of the analysis of these relations in the co-orientation model, instructors identified psychological burden and passive and dependent cognitive frameworks among students; however, these were not reported in the students' perspectives. Likewise, the reality seekers type found among the perception types of instructors was not identified by the students. These findings can help develop and implement simulation-based curricula aimed at maximizing the learning effect of nursing students.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.153-160
• /
• 2020

This research aims to provide empirical basic data for the development of local communities through the establishment of efficient strategies for the formation of positive relations between the club and the region through the Creation of Shared Value (CSV) activities. We come up with the results of this study to show that CSV, social problem orientation, and core competency utilization affect the team trust of local community, and that CSV, long-term orientation, social problem orientation and core competency utilization affect community identification. The research should enhance the value of professional sports teams that promote their own path to self-sustaining as a single independent business area, and identify their trust through CSV activities for co-prosperity with their local communities, and thus their relationship with the community. Therefore, various strategies and efforts will ultimately increase the team trust and community identity of local residents in professional volleyball teams, while at the same time gaining positive effects on professional volleyball teams.