• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.63-72
• /
• 1998

In this study, the effects of the current pulsing conditions, on the spatter generation rate during the $CO_2$ gas metal arc welding (GMAW) were investigated. Normally using the inverter type power supply, of which the welding current waveform was regulated to reduce the spatter generation rate, but in this study pulsing was imposed on the welding current. Observation of the metal transfer phenomena during the pulsed current GMAS indicated that the droplet transfer from the electrode via the short circuit transfer and the repelling transfer mode could be minimized by selecting optimum combinations of pulsing parameters, which include base and peak current, base and pak duration. It was also demonstrated in this study that proper combinations of the pulsing parameters led to reduce generation of spatters during GMAW shielded by $CO_2$ gas.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.296-298
• /
• 2005

Hydrogen generation by the hydrolysis of aqueous sodium borohydride $(NaBH_4)$ solutions was studied using IRA-400 anion resin dispersed Pt. Ru catalysts and Lithium Cobalt oxide $(LiCoO_2)$ supported Pt, Ru and PtRu catalysts. The performance of the $LiCoO_2$ supported catalysts is better than the ion exchange resin dispersed catalysts. There is a marked concentration dependence on the performance of the $LiCoO_2$ supported catalysts and the hydrogen generation rate goes down if the borohydride concentration is increased beyond $10\%$. The efficiency of PtRu- $LiCoO_2$ is almost double that of either Ru-$LiCoO_2$ or Pt-$LiCoO_2$ for $NaBH_4$ concentrations up to $10\%$.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.4
• /
• pp.324-330
• /
• 2018

In this study a numerical study was conducted to show flow, temperature and gas distributions in a high temperature CO shift reactor which was designed specially for energy saving and then evaluated with the related experiment. Mole fractions of syngas at the end of the catalyst bed were predicted with various assumed pre-exponential factors, were compared with the corresponding experimental results and $10^8$ was finally selected as the value. With the selection, a base case was examined. It was calculated that the inlet duct attached asymmetrically to the CO shift reactor affects on the distribution of the upward momentum (+z directional). In addition, CO conversion ratio is achieved up to 90% in the catalyst bed and especially it reached up to 70% at the initial part of catalyst bed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.12
• /
• pp.968-976
• /
• 2009

As the global warming becomes a serious environmental problem, studies of reducing $CO_2$ emission in power generation area are in progress all over the world. One of the carbon capture and storage(CCS) technologies is known as oxy-fuel combustion power generation system. In the oxy-fuel combustion system, the exhaust gas is mainly composed of $CO_2$ and $H_2O$. Thus, high-purity $CO_2$ can be obtained after a proper $H_2O$ removal process. In this paper, an oxy-fuel combustion cycle that recovers the waste heat of a high-temperature fuel cell is analyzed thermodynamically. Variations of characteristics of $CO_2$ and $H_2O$ mixture which is extracted from the condenser and power consumption required to obtain highly-pure $CO_2$ gas were examined according to the variation of the condensing pressure. The influence of the number of compression stages on the power consumption of the $CO_2$ capture process was analyzed, and the overall system performance was also investigated.

• Journal of Communications and Networks
• /
• v.4 no.4
• /
• pp.336-343
• /
• 2002

A major challenge for next generation mobile communication is capturing the system architecture’s complexity with all its internal and external dependencies. Seamless integration of heterogeneous environments in all system parts is a key requirement. Moreover, future systems have to consider the different evolution cycles of individual system parts. Among those, services are expected to change the fastest. With respect to these considerations, we propose an overall architecture for next generation mobile communication systems. It covers all system parts from wireless transmission to applications including network and middleware platform. Our approach focuses on adaptability in terms of recon- figurability and programmability to support unanticipated system evolution. Therefore, we consider abstraction layers which consist of adaptable cooperating components grouped by open platforms rather than rigid system layers. In addition to that, we introduce cross-layer cooperation allowing an efficient use of the available resources. Specific scenarios illustrate the feasibility of our approach.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.343-344
• /
• 2006

Consumption of fossil fuel has been increasing steadily, and it has seriously affected environment. Due to this situation, UN establish ed UNFCC (United rations Framework Convention on Climate Change), and since Feb. 2005, Kyoto Protocol has come into effect for UNFCC obligation. In Korean power system, coal and oil thermal generation emitting large CO2 form about 46% of total generation. Moreover since electricity dem and has been increasing continuously, various alternatives should be designed to comply with Kyoto Protocol. In this paper, we analyze changes of each GENCO's generation pattern and resource planning under CO2 emission constraints. For this analysis, we incorporate CO2 emission constraints and the emission trading mechanism into the conventional OPF model.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2940-2945
• /
• 2008

The scale of 2.4 MW MCFC was taken to construct a high-efficiency and economical power generation system without CO2 emission into the atmosphere for utilizing its exhaust gas. The conventional steam turbine power generation system (STGS) was evaluated and the net generated power (NGP) was estimated to be only 133 kW and the STGS is not economically feasible. A CO2-caputuring repowering system was proposed, where low temperature steam (LTS) produced at HRSG by using exhaust gas from MCFC is utilized as a main working fluid of a gas turbine, and the temperature of LTS was raised by combusting fuel in a combustor by using pure oxygen, not the air. It has been shown that NGP of the proposed system is 264 kW, and CO2 reduction amount is 608 t-CO2/y, compared to 306 t-CO2/y of STGS. The CO2 reduction cost was estimated to be negligible small, even when the costs of oxygen production and CO2 liquefaction facilities etc. were taken into account.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.83-90
• /
• 2013

The purpose of this study is to replace existing liquid chlorine with localization of on-site high (12%) sodium hypochlorite generation system. On-site high (12%) sodium hypochlorite generation system is higher the current efficiency of 38.7%, 54.6% reduction of salt consumption, and 97.3% lower rate of chlorate than on-site low (0.8%) sodium hypochlorite generation system.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.1032-1043
• /
• 2015

ETRI's Co-Pilot project is aimed at the development of an automated vehicle that cooperates with a driver and interacts with other vehicles on the road while obeying traffic rules without collisions. This paper presents a core block within the Co-Pilot system; the block is named "Co-Pilot agent" and consists of several main modules, such as road map generation, decision-making, and trajectory generation. The road map generation builds road map data to provide enhanced and detailed map data. The decision-making, designed to serve situation assessment and behavior planning, evaluates a collision risk of traffic situations and determines maneuvers to follow a global path as well as to avoid collisions. The trajectory generation generates a trajectory to achieve the given maneuver by the decision-making module. The system is implemented in an open-source robot operating system to provide a reusable, hardware-independent software platform; it is then tested on a closed road with other vehicles in several scenarios similar to real road environments to verify that it works properly for cooperative driving with a driver and automated driving.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.83-93
• /
• 2016

PURPOSES : The aim of this article is to compare and identify eco-friendly competitiveness between (regional) motorway and high-speed rail(HSR) from the perspective of $CO_2$ emission in the Republic of Korea. METHODS : In order for an analysis of low-carbon competitiveness between the two modes, $CO_2e$ emission, $CO_2eppk$ (equivalent $CO_2$ gram per passenger kilometer), is employed as a comparison index. As for HSR, the index is calculated based on the passenger transport data and the gross of $CO_2e$ produced by Kyungbu high-speed line in 2013. Additionally, the gross of $CO_2e$ is computed by the greenhouse gas emission factors of domestic electricity generation mix. Regarding the index of motorway, it is directly calculated using both the official $CO_2e$ emission factor and the passenger-car occupancy of motorway. RESULTS : The results revealed, in the case of inter-regional transport, that the $CO_2e$ emission of displacement-based cars is 54.9% less than that of HSR, as the domestic electric power systems heavily relies on the thermal power plants over 66%. Note that internal combustion engines commonly used for vehicles are more energy-efficient than steam-driven turbines usually utilized for thermal power generation. CONCLUSIONS : It can be seen, at the very least in our study, that HSR has no superiority over motorway in the case of $CO_2e$ emission under the situations of domestic electricity generation mix. In addition, advanced eco-friendly vehicles have strong advantages over HSR. Therefore, all-out efforts should be made to develop and harvest renewable energy sources in order to achieve low-carbon HSR, sparing fossil fuels.