• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1057-1063
• /
• 2023

The urban railway sleeper floating track, the subject of this study, is an anti-vibration track to reduce vibration transmitted to the structure. currently, the replacement cycle of resilience pad for sleeper floating tracks is set and operated based on load. however, most previous studies were conducted on load-based structural safety aspects, such as fatigue life evaluation of sleeper anti-vibration pads and increase in track impact coefficient and track support stiffness due to increase in spring stiffness. therefore, in this study, we measure the vibration acceleration of the ballast for each analysis section and use the results of 7 million fatigue tests to calculate the spring stiffness of the resilience pad for each section. the spring stiffness of the resilience pad calculated for each section was set as the analysis data and the concrete vibration acceleration was derived analytically. the adequacy of analysis modeling was verified as the analyzed concrete bed vibration acceleration for each section was within the field-measured concrete bed vibration acceleration range. using the vibration acceleration curve according to the derived spring stiffness change, the spring stiffness of the resilience pad is estimated from the measured vibration acceleration. therefore, we would like to present a technique that can estimate the spring stiffness of resilience pad of a running track using the vibration acceleration of the measured concrete bed.

• The Research Journal of the Costume Culture
• /
• v.3 no.2
• /
• pp.241-260
• /
• 1995

The Maori's traditional clothing materials, basic forms of dress, and the pattern and technique of tatoo were examined in the present study in order to deepen the appreciation of the cultural heritage of the Maori. The research method employed was the analysis of written materials. And a fild-trip was also made for the study. The study was limitted to the traditional culture of body adornment of the Maori including the clothing which is preserved and practicing by them at the present day, and the origin and the process of the historical development of those are not included in the scope of the present study. Followings are the results of the study: (1) By far the most widely used fiber for Maori clothing is abtained from what is commonly called New Zealand Flax. The fiber of kiekie(Freycinetia baueriana) and cabbage trees(Cordyline spp.) may also be used. The strong, long-lasting fiber of toi(cordyline indivisa) is used for a prestige warrior's cloak. Flat strips of ti kauka(Cordyline australi) are also used as thatch on rain cloaks. (2) Regardless of technique used, Maori weaving is always worked horizontally from left to right. Traditionally the work was suspended between two upright turuturu or weaving sticks. As the work progressed a second pair of uprights was used to keep the work off the ground. These uprights were moved forward as required. Because the weaver sat on the ground, the working edge was kept at a height that was comfortable to reach. No weaving tools are used, the wefts(aho) being manipulated by the fingers. The two main Maori weaving techniques are whatu aho patahi(single-pair twining) and whatu aho rua(double-pair twining). (3) The Maori wore two basic garments - a waist met and a cloak. The cloth of commoners were of plain manufacture, while those of people of rank were superior, sometimes being decorated with feather or dyed tags and decorated borders. Children ran more-or-less naked until puberty, being dressed only for special events. Some working dress consisted of nothing more than belts with leaves thrust under them. Chiefs and commoners usually went barefoot, using rough sandals on journeys over rough country (4) The adornment of men and women of rank was an important matter of tribal concern as it was in chiefly persons that prestige of the group was centred, The durable items of Maori persons adornment were either worn or carried. Ornaments of various kinds were draped about the neck or suspended from pierced earlobes. Combs decorated the head. Personal decorations not only enhanced the appearance of men and women, but many had protective magical function. The most evident personal ornament was the hei-tiki made of jade or other material. Maori weapons were treasured by their owners. They served on bottle and were also personal regalia. A man of rank was not fully dressed without a weapon in hand. Also weapons were essential to effective oratory. (5) No man or woman of rank went without some tattoo adornment except in extremely rare instances when a person was too sacred to have any blood shed. The untattooed were marked as beeing commoners of no social standing. This indelible mark of rank was begun, with appropriate rite and ritual, at puberty. And tattoo marked the person as being of a marriageable age. Maori tattoo was unlike most traditional tattoo in that its main line were 'engraved' on the face with deep cuts made by miniature bone chisels. The fill-in areas were not tattooed with cuts but with the multiple pricks of small bone 'combs' that only lightly penetrated the skin surface. The instrument of tattoo consisted of small pots of pumice or wood into which was placed a wetted black pigment made from burnt kauri gum, burnt vegetable caterpillars or other sooty materials. A bird bone chisel or comb set at right angles on a short wooden handle was dipped into the gigment, that a rod or stick was used to tap head of this miniature adze, causing penetration of the skin surface. Black pigment lodged under the skin took on a bluish tinge. A full made facial tattoo consisted of major spirals with smaller spirals on each side of the nose and sweeping curved lines radiating out from between the brows over the forehead and from the nose to the chin. The major patterns were cut deep, while the secondary koru patterns were lightly pricked into the skin.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.269-276
• /
• 2010

This study aims to extract manufacturing techniques by analysing metallurgical characteristics of the cast-iron pot from Bubjusa, examining corrosion status and microstructure with a optical microscope, SEM-EDS, micro vickers hardness tester and XRD. The microstructure analysis has presented that ferrite and partial portion of pearlite exist within the corroded outer layer. The analysis of the inner layer revealed that there is pearlite and graphite of feather shape. The one of the middle layer, which is placed between outer and inner layer, showed that corrosion has been heavily developed. Micro vickers hardness values range from 217Hv to 698Hv in constituent layers and such values lie within the ranges of the ancient iron relics. The result of EDS analysis for each microstructure presented that the outer layer has been more decarbonized than the inner layer. XRD analysis of iron corrosion compound revealed that Goethite and Hematite had been produced from the corrosive process of iron. The study concludes that the large iron pot was made by casting technique, and microstructure of inner layer had a gray cast iron. Outer layer has been decarbonized through repetitive process of heating and cooling. This results can be used as fundamental data for comparative study to reveal manufacturing techniques of large cast-iron pot.

• Korean Journal Plant Pathology
• /
• v.3 no.3
• /
• pp.187-197
• /
• 1987

Bacteria and fungi antagonistic to Fusarium oxysporum f. sp. cucumerinum Owen were effectively isolated with each of modified Triple Layer Agar (TLA) technique from rhizosphere soil where cucumber had been grown healthily in plastic film house. Three predominant bacterial isolates selected were identified as Pseudomonas fluorescens, and P. putida, Serratia sp. and three fungal isolates were Gliocladium sp. Trichoderma harzianum, and T. viride. Antagonistic bacteria inhibited $26-45\%$ of germination and $41-56\%$ of germ tube elongation of microconidia of F. oxysporum f. sp. cucumerinum on Water Agar (WA). P. fluorescens was the strongest inhibitor. Several my co parasitisms were observed on dual culture of WA between antagonistic fungi and F. oxysporum f. sp. cucumerinum such as coiling, penetration, overgrowing, and lysis. Mycelial lysis of the pathogen was the most severe at pH 4.6, followed by 3.6, 5.6 and 6.6 of the medium in decreasing order. At pH 6.6, mycelia of the pathogen were not conspicuously damaged, however, the antagonistic fungi formed abundant chlamydospores especially Gliocladium sp. T. harzianum revealed the most excellent antagonism in vitro.

• Korean Journal of Microbiology
• /
• v.35 no.4
• /
• pp.315-321
• /
• 1999

This study has been performed to deveope a yeast strain having high ${\alpha}$-amylase production ability using nuclear transfer method. Hybrids formed between the strains of Saccharomyces fiburigera KCTC 7393 and Saccharomyces cerevisiae KCTC 7049 (tyr-, ura-)were obtained by nuclear transfer technique. Nuclei isolated from the wild type S. fiburigera strain were transfered into auxotrophic mutants S. cerevisiae and selected the hybrids showing an increased starch degrading capability were selected (MN-16). This transformant grew best and produced maximal ${\alpha}$-amylase activity on the medium containing 2% (V/V) soluble starch. ${\alpha}$-Amylase from MN-16 was purified electrophoretically homogenety and its properties were investigated. The enzyme was purified about 10.6 fold with an overall yield 9.7% from the culture medium by ammonium sulfate fractionation. DEAE-Sephacel column chromatography, and Sephacryl S-200 column chromatography. The purified enzyme showed a single band on SDS-polyacrylamide gel electrophoresis. The molecular weight of the ${\alpha}$-amylase was estimated to be 53,000 daltons by SDS-PAGE and by gel permeation chromatography on Sephacryl S-200. The purified enzyme showed the maximum activity at pH 5.5 and 40${\circ}C$. The km value for soluble starch was 2.5㎎/㎖. The enzyme activity increased in the presence of $Ca^{2+}, Co^{2+}, EDTA, Mg^{2+}, Mn^{2+}, Zn^{2+}$, but inhibited by $Cu^{2+}, Fe^{2+}$, and $Ni^{2+}$

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.269-274
• /
• 2010

An antifungal antibiotic-producing strain, BCNU 2003, was isolated from forest soil in Korea. The morphological and physiological characters, and 16S rRNA sequences analysis of strain BCNU 2003 identified this strain as Bacillus genus. The Bacillus sp. BCNU 2003 showed strong antifungal activities against Aspergillus niger, Trichophyton mentagrophytes and Trichophyton rubrum with inhibition ranging from 62.05 to 63.49% by using dual culture technique. Bacillus sp. BCNU 2003 produced a maximum level of antifungal substances under aerobic incubation at 28oC and pH 6.5-7.2 for 6 days in LB broth. Ethyl acetate extract of the cultured broth showed strong antifungal activity and a broad antifungal spectrum against various pathogenic fungi. The minimum inhibitory concentration (MIC) values for its active extracts ranged between 0.0625 mg/ml and 1 mg/ml. In addition, Bacillus sp. BCNU 2003 was determined to have the ability to produce enzymes such as amylase, protease, gelatinase and catalase.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.204-219
• /
• 1997

The use of fluoride is one of the most effective methods for caries prevention. Fluoridation of public water supply has been recognized, for many years, as an effective way to reduce dental caries. The fluoride supplement has been recommended when the natural fluoride was unavailable or below the optimal range. However the mechanism of caries prevention by fluoride has not yet been clarified and it is well known that an overdose of fluoride results inacute and chronic toxicity, especially dental fluorosis. Fluoride mouthrinsing solution is widely used in dentistry due to its effectiveness in carrying anticariogenic action. Understanding the effects of fluoride mouthrinsing solution on human gingival fibroblasts will provide the safety rationale for its use during the caries preventive therapy. The purpose of this study was to evaluate the cytotoxic effect of fluoride mouthrinsing solution on the human gingival fibroblast in vitro. The human gingival fibroblasts were cultured from healthy gingiva on the extracted deciduous teeth of children. Cells were inoculated into a 24-well plate with $1{\times}10^4cells/well$ of medium at $37^{\circ}C$, 100% humidity, 5% $CO_2$ incubator for 24 hours. And the cells were counted by using the hemocytometer at each designed study. Human gingival fibroblasts were cultured in growth medium after one minute application range of 0.02%-0.2% NaF solution and 0.1% $SnF_2$ solution. The cells used in this study were between fifth to eighth passage number. The cell morphology was examined by inverted microscope and cell proliferation was measured by incorporating $[^3H]$-thymidine into DNA. DNA synthesis by human gingival fibroblasts was assessed by $[^3H]$-thymidine uptake assays while the cell activity was measured by MTT assay. Each concentrated fluoride mouthrinsing solution was estimated for its biocompatability with fibroblasts by the tissue culture technique. The results of this study were as follows : 1. It was observed that at 0.05%, 0.2% NaF mouthrinsing solution the cytoplasmic processes became globular. When 0.1% $SnF_2$ mouthrinsing solution was applied, the cytoplasmic process and cell morphology were disappeared. 2. DNA synthetic activity was reduced regardless of the concentration of the fluoride mouthrinsing solution. However, the result is statistically insignificant except 0.1% $SnF_2$ mouthrinsing solution(p<0.05). 3. Our results indicate that 0.02%, 0.05% concentrations of NaF mouthrinsing solution caused minimal cytotoxicity. But 0.2% NaF and 0.1% $SnF_2$ concentration were a significant difference between the cell activity in the experimental group and control group (p<0.05). 4. After appling 0.05% & 0.02% NaF fluoride mouthrinsing solution, cell activity was restored to the control groups level according to incubating time. The results suggest that direct exposure to fluoride solution inhibits gingival fibroblast activity. Therefore, for the most effective use of fluoride use, lowering the concentration of fluoride mouthrinsing is advisable because it maintains biocompatability and free ion in the oral fluid.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.2
• /
• pp.126-131
• /
• 2005

Objective : The choice of tumor antigen for dendritic cell[DC]-loading has still been an unresolved problem in the DC-based vaccine strategies against malignant gliomas that has not been found well-characterized tumor specific antigens. In this study, we compare tumor-specific T cell response induced by glioma apoptotic body[GAB]-pulsed DCs to response induced by glioma cell lysate-pulsed ones quantitatively. Methods : DCs generated in the presence of granulocyte macrophage-colony stimulating factor and interleukin[IL]-4 from peripheral blood mononuclear cells[PBMCs] of HLA-A2 positive healthy donors were cultured. Each GABs and glioma cell lysate generated from HLA-A2 positive T98G glioblastoma cells were co-incubated with DCs. $CD8^+$ T lymphocytes isolated from PBMCs of same donors were cultured in media containing IL-2 and either stimulated by GAB- or lysate-pulsed DCs three times at a weekly interval. The interferon[IFN]-${\gamma}$ concentrations of each cell culture supernate were measured by enzyme immunoassay technique. Cytolytic activity of the generated cytotoxic $CD8^+$ T cells either stimulated with GAB- or lysate-pulsed DCs was determined by a standard 4-h $^{51}Cr$-release assay. Results : IFN-${\gamma}$ production and cytolytic activity of effector T cells stimulated by GAB-pulsed DCs were significantly higher than those of T cells stimulated by lysate-pulsed ones. Conclusion : These results indicate the choice of antigen is a critical determinant in the induction of antitumor immunity against malignant glioma. Antigen preparations from GABs represent a promising alternative to glioma cell lysate in DC-based glioma vaccine strategies.

• Korean Journal of Microbiology
• /
• v.45 no.2
• /
• pp.215-221
• /
• 2009

Site-specific incorporation of unnatural amino acids into proteins in vivo can be achieved by co-expression of an orthogonal pair of suppressor tRNA and engineered aminoacyl-tRNA synthetase (ARS) that specifically ligates an unnatural amino acid to the suppressor tRNA. As a step to establish this technique, here we generated an Escherichia coli reporter strain DH10B(Tn:lacZam) by integrating amber mutated lacZ gene into the chromosome of E. coli DH10B strain. In vivo expression of E. coli amber suppressor $tRNA^{Gln}$ produced blue colonies in culture plates containing X-Gal as well as dramatically increased $\beta$-galactosidase activity. In addition, expression of an orthogonal pair of Saccharomyces cerevisiae suppressor $tRNA^{Tyr}$ and tyrosyl-tRNA synthetase also produced blue colonies as well as moderate increase of $\beta$-galactosidase activity. These data demonstrate that our reporter strain will provide an efficient method to assess amber suppression in both qualitative and quantitative manners.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.91-101
• /
• 2010

This paper has the purpose of suggesting a development-method on the fashion products that would secure the competitiveness in the global markets through creating supersensitive practical products on the basis of developing originative fashion-goods being made of jacquard that is fine quality of couture. This paper has collected data through the cases of the developed nations in fashion, precedent studies and all the related literature on the subject. The results of this researching are as following: The first, it is expected that the necessity of developing new fashion products would be appealed toward the prestige group of consumers who are seeking for the fine quality and super-sensitivity in female fashion in Korea, and it is the current situation that the products made of jacquard are gradually expanding not only in the area of apparel, fashion goods and interior but also another areas. The current situation of the global market suggests the necessary strategy of survival, that is, the development of supersensitive materials and creative products which would be able to keep the high quality and lower the selling price through cost reduction. The second, the suggestion of the direction in developing the products of the female fashion made of jacquard has two points - the development of the texture that would realize a unique form and the development of the material that would be able to realize planar pattern and three dimensional pattern which are woven with thin and light materials with various solidity and delicacy through various techniques of mixing and three dimensional expression. The third, the expected ripple effect and utilization generated from the development of fashion products are as followings: As material characteristics of jacquard, It needs the specialization of various techniques and specialized production system in using jacquard, and the specialized technique and system would make it possible to produce not only the higher value-added products through expressing affluent colors and delicate design but also competitive products through cutting the process and cost, eventually, it would lead to the expansion of the jacquard market of super-sensitive prestige. Therefore, it is remarkable that various development of products toward the global market and the prestige female fashion market can suggest the vision that make the national fashion industry develop into the higher value-added knowledge industry integrating technology and culture.