• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.35-37
• /
• 2001

This study has investigated the chemical characteristics and the contamination of groundwater in relation to land use in Daejeon Metropolitan City. An attempt was made to distinguish anthrophogenic inputs from the influence of natural chemical weathering on the chemical composition of groundwater at Taejon. Groundwater samples collected at 170 locations in the Taejon area show very variable chemical composition of groundwater, e.9. electrical conductance ranges from 65 to 1,290 S/cm. Most groundwater is weakly acidic and the groundwater chemistry is more influenced by land use and urbanization than by aquifer rock type. Most of groundwater from green areas and new town residential districts has low electrical conductance, and is of Ca-HC $O_3$ type, whereas the chemical composition of groundwater from the old downtown and industrial district is shifted towards a Ca-Cl (N $O_3$+S $O_4$) type with high electrical conductance. A number of groundwater samples in the urbanized area are contaminated by high nitrate and chlorine, and exhibit high hardness. The Ep$CO_2$, that is the $CO_2$ content of a water sample relative to pure water, was computed to obtain more insight into the origin of $CO_2$ and bicarbonate in the groundwater. Factor analysis of the chemical data shows that the HC $O_3$ and N $O_3$ concentrations have the highest factor loadings on factor 1 and factor 2, respectively. Factors 1 and 2 represent major contributions from natural processes and human activities, respectively. The results of the factor analysis indicate that the levels of $Ca^{2+}$, $Mg^{2+}$, N $a^{+}$, Cl and SO4$^2$ derive from both pollution sources and natural weathering reactions.ons.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.430-433
• /
• 2010

The gasket materials of for the lithium ion battery requires chemical resistance to electrolyte, electrical insulating, compression set, anti-contamination and low temperature property. To check the special characteristics of fillers which are applied to rubber for gasket, compound of EPDM, NBR and FKM (fluoro elastomer) were made by adjusting weights of carbon black and silica additive. Using these compounds, we had done tests of long-term stability against electrolyte, compression set and low-temperature property with considering operating condition of the lithium ion battery. From this test, we investigated the physical and chemical characteristics of rubber with using of carbon black and silica additive in each.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.4
• /
• pp.432-438
• /
• 2007

The reforming process for hydrogen production generates some impurities. Impurities in hydrogen such as $CO_2$, CO, $H_2S$, $NH_3$ affect fuel cell performance. It is well known that CO generated by the reforming process may negatively affect performance of cell, cause damage on catalysts resulting performance degradation. Hydrogen produced by reforming process includes about 2% methane. The presence of methane up to 10% is reported negligible degradation in cell performance. However, methane more than 10% in hydrogen stream had not been researched. The concentration of impurity supplied to the fuel cell was verified by gas chromatography(GC). In this study, the influence of $CH_4$ on performance of PEM fuel cell was investigated by means of current vs. potential experiment, long run(10 hr) test and electrochemical impedance measurement when the concentrations of impurities were 10%, 20% and 30%.

• Journal of Powder Materials
• /
• v.25 no.1
• /
• pp.30-35
• /
• 2018

The friction characteristics of Al-Fe alloy powders are investigated in order to develop an eco-friendly friction material to replace Cu fiber, a constituent of brake-pad friction materials. Irregularly shaped Al-Fe alloy powders, prepared by gas atomization, are more uniformly dispersed than conventional Cu fiber on the brake pad matrix. The wear rate of the friction material using Al-8Fe alloy powder is lower than that of the Cu fiber material. The change in friction coefficient according to the friction lap times is 7.2% for the Cu fiber, but within 3.8% for the Al-Fe alloy material, which also shows excellent judder characteristics. The Al-Fe alloy powders are uniformly distributed in the brake pad matrix and oxide films of Al and Fe are homogeneously formed at the friction interface between the disc and pad, thus exhibiting excellent friction and lubrication characteristics. The brake pad containing Al-Fe powders avoids contamination by Cu dust, which is generated during braking, by replacing the Cu fiber while maintaining the friction and lubrication performance.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.212-216
• /
• 2010

The materials of the lithium ion battery gasket require chemical resistance to the electrolyte, electrical insulating, compression set, anti-contamination and heat resistance. To estimate suitability for rubber which has better performance to compression set than PFA, each compound were made with various rubbers, such as EPDM, NBR, FKM, FVMQ, VMQ and we checked the characteristics of each compound. Samples from each compound was deposited in Propylene Carbonate and tested for changing of Hardness and Volume during 1,000 hr with $80^{\circ}C$. EPDM and VMQ showed good performance to chemical resistance to the electrolyte, and also we could get the values over $10^{10}{\Omega}cm$ on volume resistance basis in electrical insulating. EPDM and VMQ were judged as the most suitable material.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.91-102
• /
• 2015

The iridium disc, generally used in industrial radiography, is examined to find the fracture morphology and fine particles remaining on the shear blank surface. Randomly selected 1,200 discs were observed under a scanning electron microscope tilted more than $45^{\circ}$. Fracture surfaces are classified into three groups: (1) surface fall-out, (2) fracture on the edge and (3) multi-step brittle fracture, which shows the mutual relationship between the fracture morphology and remaining particles. Fracture particles were removed by cleaning the discs in a ultrasonic bath with acetone and collected at the bottom. Removed number of the particles were counted for each different group of fracture surfaces. Followings are conclusions: (1) About 80.5% of discs (966/1,200), have sound plastic shear surfaces with particles remained. (2) About 2% discs accompany surface fall-out's having large particles tens of ${\mu}m$, which is stable not to be pulled out even after the considerably long time of ultrasonic cleaning. (3) About 5% discs contain the fractures on the edge and the particles are removed thoroughly within 30 minutes. (4) 234 discs out of 1,200 discs have multi-step fracture surfaces whose particles never removed in a short period of time but come out very slowly. Such a disc having multiple-step fracture is attributed to the promate cause to the 'leaker'. It is noted here that the discs having mutiple-step fractures should be treated separately with special care, and it is need to study how to treat them.

• Culinary science and hospitality research
• /
• v.15 no.4
• /
• pp.1-8
• /
• 2009

The aim of this study is to investigate the microbial contamination assessment of raw Jinmichae to cook and to establish its control. Three kinds of Korean Jinmichae products(K1, K2, K3) and three kinds of imported Jinmichae products(Chile: F1, Peru: F2, Mexico: F3) were collected from markets and department stores in Seoul and Gyeonggi-do. The results were as follows; Aerobic mesophilic bacteria in raw Jinmichae(F2) was detected $7.20{\times}10^7$ CFU/g, which exceeded the acceptable standard level, $1.0{\times}10^6$ CFU/g. The rest of raw groups fell up to $1.0{\times}10^3{\sim}1.0{\times}10^4$ CFU/g. Aerobic mesophilic bacteria were detected in blanched and fried Jinmichae groups. Boiled Jinmichae group did not exceed the acceptable standard level of $1.0{\times}10^6$ CFU/g. However, all the fried groups exceeded the level. E. coli were detected in raw Jinmichae but it was able to be controlled by blanching. Unlike this, E. coli was not completely controlled by roasting for 20 seconds relative to 40, 60 seconds. S. aureus were effectively controlled by boiling, however, it was not controlled by roasting. After roasting Jinmichae for 60 seconds, S. aureus were detected in the half of all groups. In this study, Jinmichae were found to be favorable one of side dishes in school meal service. Jinmichae can be contaminated by microbial pathogens such as S. aureus, E. coli, etc. Therefore, further studies are needed to monitor microbial pathogens and to provide their control.

• Journal of Life Science
• /
• v.19 no.4
• /
• pp.486-491
• /
• 2009

This study was conducted to investigate microbial distribution in the processing steps and to estimate quality index and shelf life of packaged Tofu (soybean curd). Sanitation and safety of Tofu were analysed in aspects of total viable counts (TVCs) and coliforms. Organoleptic deterioration was observed from some packaged Tofu when their TVCs were over $10^6\;CFU/g$. The controlled simply packaged Tofu and sterilized Tofu with TVCs of under $10^5\;CFU/g$ were 32.0% and 86.9% of the total samples, respectively. Also, the controlled simply packaged Tofu and sterilized Tofu with negative coliforms were 12.0% and 83.7% of the total samples, respectively. TVCs and coliforms increased in some processing steps, which include washing and soaking of raw soybeans, and formation and 1st cooling of packaged Tofu. Increases of TVCs and coliforms in the washing and soaking step were due to contamination from the soaking tank and airborne bacteria, whereas increases of TVCs and coliforms in the grinding step were due to contaminations from the grinder, line and reserving tank. TVCs and coliforms increased in the formation and 1st cooling step of packaged Tofu due to contaminations from filter wools, trays, employee's hands, cooling water, formed products and filter wools.

• Economic and Environmental Geology
• /
• v.27 no.1
• /
• pp.101-113
• /
• 1994

Geochemical investigations based on measurements of water parameters and sampling of stream sediments have been carried out, in the Okdongcheon stream and its tributaries in the Sangdong area of South Korea. There are two main problems occurring in the Okdongcheon stream: an acid mine drainage in the upper reaches and toxic trace metal contamination of the stream sediments mainly in the lower reaches. Acid mine water originating from coal mining was neutralized at the confluence of the Cheonpyongcheon stream whilst suspended solids due to flocculation of iron in water caused turbidity which was undesirable. Sediments in the Okdongcheon stream have been contaminated by mining activites. Iron was heavily concentrated in sediments in the upper Okdongcheon whilst toxic trace metals including Pb, Cu, Zn, Co, Cd, As and Bi were accumulated in sediments at stations draining metallic mining areas and near the tailings dam. There is now a requrement to neutralise the acid mine drainage and to use site-specific analysis of biological communities to ensure the conservation and preservation of aquatic organisms.

• Korean Journal of Animal Reproduction
• /
• v.16 no.4
• /
• pp.289-299
• /
• 1993

The polypeptide patterns of cellular and follicular components were analysed by SDS-PAGE and two dimensional(2-D)electrophoresis combined with isoelectric focusing (IEF) to establish protein profiles in each of the components in porcine follicles. Oocyte-cumulus complexes were cultured in M16+FCS+Gn at 39 in an atmosphere of 5% CO$_2$, in air for 35 h. At the end of the culture, the zona-free oocyte, ZP alone and cumulus cells were prepared and analysed either on 10% SDS-PAGE for the protein profile at the first dimensional gel or 2-D protein pattern. The amounts of each samples were determined for the visualization with Coomasie brilliant blue (CBB) or silver staining, thus giving useful information for the identification of specific proteins in the components or appropriate amount of samples for proper visualization. Oocyte showed 25 and 114 kd major protein band. Other minor components were additionally visualized with CBB on the same gel after silver staining procedure. Cumulus cells also showed specific proteins which is not present in the oocytes. The number of cumulus cell was proper to give major bands with CBB and additional minor bands with silver staining. To establish the degree of contamination from the remnant of the corona radiata to the ZP, zonae were differently prepared or analysed by SDS-PAGE.The preparation of the ZP in this study did not showed any contamination judged by the protein profile of the components. Also follicular fluid showed its specific protein profile without any significant differences among the different sizes of follicles. The established protein profile of each follicular component should be helpful for the identification and elimination of contaminated components, i. e., antigen preparation or immunological studies. The results also suggest that the preparation of each components in the study was appropriate and can be used for a further sensitive biochemical analysis in mammalian oocytes and early embryos.