• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.9
• /
• pp.745-752
• /
• 2006

DOS and NaCl aerosol particles were used to determine collection efficiencies of a 2-stage electrostatic wet scrubber with respect to particle size. The DOS and NaCl aerosols have geometric mean diameters of 0.1-3.0 urn, geometric standard deviations of $1.1{\sim}1.8$ and total number concentrations of $450{\sim}2,400\;particles/cm^3$. The tested operating variables for the electrostatic wet scrubber included air velocity and water injection rate. It was shown from the experimental results that particle collection efficiencies increased in the submicron particle size range when different polarities were applied on the water nozzle and corona wire, respectively. This increase in the collection efficiency is attributed to strong electrostatic attraction between the negative water droplets and positive submicron particles. The collection efficiencies also increased when water injection rate was increased or air velocity was decreased. Meanwhile, the pressure drop across the wet scrubber decreased by 90% compared with the existing mechanical wet scrubber. Finally, ammonia gas was used to determine gas removal efficiencies. It was observed that the gas removal efficiencies increased when the air velocity was decreased or the water injection rate was increased.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2017

Seawater intrusion was evaluated using electrical conductivity, chemical proxies, and oxygen isotopic compositions in coastal area. It seems that groundwater in the area where the electrical conductivity is over $3,000{\mu}S/cm$ is influenced by seawater. However, it is very difficult that seawater intrusion is distinguished from other contaminants using the electrical conductivity. The chemical proxies and oxygen and hydrogen isotopic compositions can quantitatively estimate seawater intrusion. However, these method is a costly disadvantage. Therefore, firstly, groundwater contamination by seawater intrusion was evaluated using electrical conductivity and then the additional chemical and isotopic analysis were conducted in areas where possibility of contamination by seawater intrusion is high. These systematic analytical method can reduce analytical cost to quantitatively evaluate influence of seawater intrusion on coastal groundwater and may improve efficiency of analytical method for seawater intrusion.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.121-132
• /
• 2004

Concentrations of Al, As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Zn were determined in four arctic brown algae (Laminaria saccharina, L. digitata, Alaria esculenta, Desmarestia aculeata) in an attempt to examine for their metal accumulation capacity and also to assess their contamination levels. Macroalgae were collected from shallow subtidal waters (<20m) of Kongsfjorden (Kings Bay) on Spitsbergen during the period of the late July to early August 2003. Metal concentrations highly varied between sampling sites, species and tissue parts. Input of melt-water laden with terrigenous sediment particles seemed to have a large influence on baseline accumulations of some metals (Al, Fe, Mn, Pb etc.) in the macroalgae, causing a significant spatial variation. There were also significant concentration differences between the young and old tissue parts in L. saccharina, L. digitata and A. esculenta. While Al, Fe, Mn, Pb were higher in the perennial parts (stipes and holdfast below meristematic region), Cd and As concentrations were significantly higher in the young blades above the meristematic region. Zn and Cr, on the other hand, showed little differences between the tissue parts. The highest metal concentrations were found in D. aculeata, which seems to be due to its filamentous fine branches leading to high surface/volume ratios. The lowest concentrations were found in the two Laminaria spp., the blades of which are thicker than D. aculeata and A. esculenta. No distinct signs of contamination were detected in the brown algal species analyzed. Added to this, the results of the present studies suggest the potential utility of L. saccharina, L. digitata and A. esculenta as biomonitors for metal pollution monitoring in this area.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.1
• /
• pp.17-23
• /
• 2003

$H_2$ permeation flux though a $100{\mu}m-thick$ Pd-Ru (6wt%) membrane was measured at various temperatures and pressures. The permeation flux followed the Sievert's law and thus the rate-limiting step of the hydrogen permeation was the bulk atomic diffusion step. The activation energy of the permeation flux was obtained at 17.9 kJ/mol and this value is consistent with those published previously. While no degradation of the permeation flux wasfound in the membrane exposed to the $O_2$ and $CO_2$ environments for 100 hours, the membrane exposed to $N_2$ environment for 100 hours showed the degradation in the $H_2$ permeation flux. The $H_2$ permeation was decreased as the exposure temperature to $N_2$, environment was increased. The $H_2$ permeation flux was fully recovered after the membrane was kept in the $H_2$ environment for certain time. The permeation flux degradation might be caused by the formation of metal nitride on the membrane surface.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.126-129
• /
• 2007

In order to ruduce traffic-jam, it is requested to extend road. As a result, the construction of tunnels is inevitable considering our mountatinous topography. In tunnel construction work, major contamination materials occur from rock drilling, blasting rock, rock transporting, and short-creat. After rock blasting, a very high concentration of particles over $5000{\mu}g/m^3$ is maintained for 4 h when air is supplied by pans, by which the construction work has to be delayed at least 30 min. Although dry dust collectors are used, the effective operation time span is limited to 3 h. In this work, the behavior of particles in air and use of particle removal instruments are investigated. As a result, it was important to compare efficiencies of dry and hydro dust collectors.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4270-4274
• /
• 2011

A method is proposed for determining chromium content in the carbon steel pipes of a nuclear power plant (NPP) to evaluate wall thinning caused by flow-accelerated corrosion (FAC). A flat file was used to obtain filings samples. To assess sampling quality, a disk form of SRM 1227 was ground with the flat file, and the amount of Cr in the filings was determined by ICP-AES. The content of chromium in the filings of SRM 1227 was estimated as six times higher than the certified value due to the contamination of chromium in the file. To eliminate chromium contamination from the file, it was coated with WC-12Co using high-velocity oxygen-fuel (HVOF) spraying systems. After obtaining filings samples using the coated file, Cr content in four types of disk-form SRMs was determined by ICP-AES. The recoveries of Cr in the disk-form SRMs were in the range of 95.4-102.6%, with relative standard deviations from 0.43 to 3.0%. The Cr contents in the filings collected from the used outlet headers of the nuclear power plants using the flat file coated were in the range of 0.11-0.19%.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.5
• /
• pp.798-802
• /
• 2009

This study was performed to assess the presence of contaminated microorganisms of Escherichia coli, Clostridium perfringens, and Bacillus cereus in the 112 commercial Saengshik products. E. coli was not detected in all the samples, but C. perfringens was detected in 11 products (9.8%). The number of the bacteria was less than 100 CFU/g, which was satisfactory to KFDA microbiological requirement. B. cereus was detected less than $10^2{\sim}10^3$ CFU/g in 7 products and $10^3{\sim}10^4$CFU/g in 13 products out of 25 products. Those detected bacteria from tryptose sulphite cycloserine agar and mannitol egg yolk polymyxin agar showed the typical characteristics of Gram positive and contained lecithinase, which can decompose egg-yolks layers in the biochemical test. Therefore, much more attention must be applied to satisfy the B. cereus requirement for Saengshik products sold in the market.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.232-236
• /
• 2000

Multi-regression statistical analyses were applied for the water quality data of shallow alluvial ground water (n = 47) collected from the Youngdeok area, in order to quantitatively generalize the natural (non-anthropogenic) causes of regional water quality variation. Seven samples having the high contamination index ( $C_{a}$ > 3) reflect the striong effects by anthropogenic activity. Most of the alluvial groundwaters have acquired their quality primarily due to the dissolution of carbonate minerals. The results of multi-regression analysis show that chlorine is mainly derived from seawater effect. Sulfur isotopic compositions of dissolved sulfur and the S $O_4$/Cl ratio also enable us to discriminate the samples (n = 18) which are affected by atmospheric input of marine aerosol (sea-spray) and also by mixing between freshwater and seawater. Hydrogen and oxygen isotope data of the samples collected lie close to the local meteoric water line obtained from nearby Pohang city but has lower slope (5.45) on the $\delta$D-$^{18}$ O plot, indicating that alluvial groundwater was recharged from infiltrated meteoric water which has undergone some degree of kinetic evaporation. The estimated initial isotopic composition of the recharged water ($\delta$D = -74.8$^{0}$ /$_{00}$, $\delta$$^{18}$ O = -10.8$^{[-1000]}$ /$_{[-1000]}$ ) suggests that the alluvial ground water recharge largely occurs during summer storm events.s.s.

• 한국해양학회지
• /
• v.13 no.2
• /
• pp.11-16
• /
• 1978

The contents of heavy metals were studied on sediments collected from the southeastern coastal area of Korea.Concentrations of the elements showed Cu 14∼ 48ppm (av. 18ppm), Pb 14∼49ppm (av. 28ppm), Zn 79∼187ppm (av. 11ppm), Co 11∼ 15ppm (av. 13ppm), Ni 22∼32ppm (av. 29ppm), Fe 3.1∼5.3% (av. 4.3%) and Mn 333 ∼1010ppm (av. 499ppm). When these values are compared with those of the unpolluted near-shore sediments from other countries,there seems to be little environmental contamination of heavy metals in the sediments of the study area. However, from the fact that the nearer to harbor the stations are, the higher the contents of copper, lead and zinc are in the sea off Pusan Bay, it is suggested that heavy metals in the sediments are starting to show some contamination from man's activities.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.5
• /
• pp.288-292
• /
• 2007

Seafood, if eaten raw, carries the risk of food poisoning. Seafood poisoning is often caused by pathogenic microorganisms originating from fecal contamination, such as Salmonella sp. and norovirus. Fecal coliforms are an important indicator of fecal contamination. Therefore, data on fecal coliforms are very important for evaluating the safety of fisheries in coastal areas. In this study, 2,226 sea water samples were collected from the southeast coast of Korea, and total and fecal coliforms were compared and analyzed. Total coliforms were detected in 76.5% of the samples and 71.4% of the total coliforms were fecal coliforms. At sea water temperatures above $20.0^{\circ}C$, total coliforms were found in 78.8% of the samples and fecal coliforms constituted 72.0% of the total coliforms. In sea water below $19.9^{\circ}C$, the respective values were 74.6% and 70.9%. These results suggest that temperature does not have a significant effect on the detection of fecal coliforms. When the salinity exceeded 30.0%o, total coliforms were found in 72.1% of the samples and fecal coliforms constituted 66.0% of these. At salinities below 29.9%o, the respective values for total and fecal coliforms were 90.4% and 85.2%. These results strongly suggest that the detection of fecal coliforms is proportional to the amount of precipitation.