• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권1호
• /
• pp.31-38
• /
• 2022

The common algae and industrial waste, chlorella and red mud, were co-pyrolyzed in carbon dioxide condition to fabricate iron-biochar composite. In order to investigate the direct effect of chlorella and red mud in the syngas generation and the property of biochar, experiments were performed using mixture samples of chlorella and red mud. The evolution of flammable gasses (H₂, CH₄, CO) was monitored during pyrolysis. The produced biochar composite was employed as a catalyst for persulfate activation for methylene blue removal. BET analysis indicated that the iron-biochar composite mainly possessed meso- and macropores. The XRD analysis revealed that hematite (Fe₂O₃) contained in red mud was transformed to Fe₃O₄ during co-pyrolysis. The composite effectively activated persulfate and removed methylene blue. Among the composite samples, the composite fabricated from the mixture composed of 1:2 chlorella:red mud showed the best performance in syngas generation and methylene blue removal.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.569-573
• /
• 2013

In this study, activated carbon fabric was prepared from a cellulose-based polymer (viscose rayon) via a combination of physical and chemical activation (mixed activation) processes by means of $CO_2$ as a gasifying agent and surface and adsorption properties were evaluated. Experiments were performed to investigate the consequence of activation temperature (750, 800, 850 and $925^{\circ}C$), activation time (15, 30, 45 and 60 minutes) and $CO_2$ flow rate (100, 200, 300 and 400 mL/min) on the surface and adsorption properties of ACF. The nitrogen adsorption isotherm at 77 K was measured and used for the determination of surface area, total pore volume, micropore volume, mesopore volume and pore size distribution using BET, t-plot, DR, BJH and DFT methods, respectively. It was observed that BET surface area and TPV increase with rising activation temperature and time due to the formation of new pores and the alteration of micropores into mesopores. It was also found that activation temperature dominantly affects the surface properties of ACF. The adsorption of iodine and $CCl_4$ onto ACF was investigated and both were found to correlate with surface area.

• 대한화학회지
• /
• 제34권2호
• /
• pp.117-122
• /
• 1990

몇 가지 온도와 압력 하에서 $trans-[CoETECl_2]^+$와 $cis-{\beta}-[CoTETCl_2]^+$ 착이온의 수화반응과 $trans-[CoETEClOH_2]_2^+$착이온의 이성질화반응의 반응속도를 분광광도법으로 측정하여 이들 착물의 반응메카니즘을 규명하였다. $trans-[CoETECl_2]^+$와 $cis-{\beta}-[CoTETCl_2]^+$ 착이온의 수화반응에 대한 활성화엔트로피, ${\Delta}S{\neq}$는 각각 4.0 eu 및 5.3 eu이고 활성화부피, ${\Delta}V{\neq}$는 각각 $-5.8 cm^3mol^{-1}$ 및 $-6.6 cm^3mol^{-1}(40^{\circ}C$)이었다. 이들 데이타로부터 수화반응위 메카니즘은 해리(D)메카니즘으로 추정할 수 있었다. $trans-[CoETEClOH_2]^{2+}$ 착이온의 $cis-{beta}-[CoETEClOH_2]^2+$ 로의 이성질화반응에 대한 활성화엔트로피, ${\Delta}S^{\neq}$와 활성화부피, ${\Delta}V^{\neq}$는 각각 9.5 eu 및 $8.4 cm^3mol^{-1}(30^{\circ}C$)이었다. 이들 데이타로부터 이성질화반응의 메카니즘은 $H_2O$가 해리된 후 이성질화가 일어나는 해리(D)메카니즘인 것으로 추정할 수 있었다.

• Reproductive and Developmental Biology
• /
• 제36권3호
• /
• pp.141-145
• /
• 2012

The present study was conducted to develop a simple method for porcine oocyte maturation without $CO_2$ regulation. In experiment 1, we evaluated that the effect of $CO_2$ non-supplement on porcine oocyte maturation. Cumulusoocyte complexes (COCs) were collected from 2~6 mm follicles and divided into three groups (Control, tube-$CO_2$, and tube-non-$CO_2$). For control, COCs were cultured in 4-well multidish in a $CO_2$ incubator. For tube-$CO_2$, COCs were cultured in a round-bottom tube in a $CO_2$ incubator, and for tube-non-$CO_2$, COCs were cultured in a round-bottom tube sealed tightly without $CO_2$ supplement in a dry incubator. The proportion of oocytes reached to metaphase II (M-II) was not significantly different among three groups (87.9% to 91.4%). In experiment 2, we evaluated the effect of $CO_2$ non-supplement during oocyte maturation on development of embryos. Oocytes with a polar body were divided into two groups (Control and tube-non-$CO_2$) and applied 1.1 kV/cm or 1.2 kV/cm voltages for parthenogenetic activation. After activation, embryos were cultured for 6 days and examined the development. The proportion of embryos cleaved was not significantly different among treatment (86.3% to 91.5%). The proportion of embryo reached to blastocyst stage was not significantly different among treatment (13.9% to 25.2%). The cell number of blastocysts was not significantly different among treatment (29.0 to 32.4). In conclusion, oocytes cultured in a dry incubator without $CO_2$ supplement have enough competence to development after parthenogenetic activation. These results would be useful for transporting oocytes or embryos a long distance.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.508-512
• /
• 2010

The optimum route to fabricate nano-sized Fe-50 wt% Co and hydrogen-reduction behavior of calcined Fe-/Conitrate was investigated. The powder mixture of metal oxides was prepared by solution mixing and calcination of Fe-/Co-nitrate. A DTA-TG and microstructural analysis revealed that the nitrates mixture by the calcination at $300^{\circ}C$ for 2 h was changed to Fe-oxide/$Co_3O_4$ composite powders with an average particle size of 100 nm. The reduction behavior of the calcined powders was analyzed by DTA-TG in a hydrogen atmosphere. The composite powders of Fe-oxide and Co3O4 changed to a Fe-Co phase with an average particle size of 40 nm in the temperature range of $260-420^{\circ}C$. In the TG analysis, a two-step reduction process relating to the presence of Fe3O4 and a CoO phase as the intermediate phase was observed. The hydrogen-reduction kinetics of the Fe-oxide/Co3O4 composite powders was evaluated by the amount of peak shift with heating rates in TG. The activation energies for the reduction, estimated by the slope of the Kissinger plot, were 96 kJ/mol in the peak temperature range of $231-297^{\circ}C$ and 83 kJ/mol of $290-390^{\circ}C$, respectively. The reported activation energy of 70.4-94.4 kJ/mol for the reduction of Fe- and Co-oxides is in reasonable agreement with the measured value in this study.

• 에너지공학
• /
• 제5권2호
• /
• pp.170-175
• /
• 1996

국내 석탄화력발전소에서 사용되고 있는 3종류의 유연탄 및 무연탄에 대해 입자 크기와 CaCO$_3$ 주입에 따른 TGA 분석을 수행하고 활성화에너지를 구하였다. 유연탄의 무게감량 시작온도는 360-38$0^{\circ}C$로 무연탄의 570~$600^{\circ}C$보다 20$0^{\circ}C$정도 낮았다. 유연탄의 활성화에너지는 입도 및 탄종에 따라 14~20kcal/mole 범위이고 무연탄은 37~55 kcal/mole로서 무연탄이 유연탄보다 활성화에너지가 매우 높았다. 석탄의 입도크기가 작아질수록 활성화에너지는 감소하였고 무게감량율과 활성화에너지값은 상관관계가 있었다. 유 무연탄의 유황분대 CaCO$_3$비율을 1:1로 주입시 유연탄은 활성화에너지 변화가 작았으나 무연탄의 경우 1~23 kcal/mole 정도로 활성화에너지가 감소하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.279-286
• /
• 2000

Magnetic field dependence of magnetization reversal in Co/Pt multilayers has been quantitatively investigated. Serial samples of Co/Pt multilayers have been prepared by dc-magnetron sputtering under various Ar pressure. Magnetization reversal was monitored by magnetization viscosity measurement and direct domain observation using a magneto-optical microscope system, and the wall-motion speed and the nucleation rate R were determined using a domain reversal model based on time-resolved domain reversal patterns. Both and R were found to be exponentially dependent on the reversing applied field. From the exponential dependencies, the activation volumes of the wall motion and nucleation could be determined based on a thermally activated relaxation model, and the wall-motion activation volume was revealed to be slightly larger than the nucleation activation volume.

• 유기물자원화
• /
• 제25권3호
• /
• pp.63-71
• /
• 2017

본 연구에서는 활성탄 제조에 널리 이용되고 있는 KOH 활성화법으로 활성화된 활성탄의 표면적 증가를 위하여 세척시간, 교반속도, 세척횟수 등의 변수들에 대한 활성탄 세척공정 최적화 연구를 수행하였다. 연구결과, 활성탄의 표면적은 세척효율이 증가됨에 따라 뚜렷하게 증가되었는데, 90% 이상의 세척효율을 얻기 위해서는 활성탄의 복잡한 세공구조에 따른 세공 내 확산메커니즘이 제어인자로 작용함을 알 수 있었다. 또한, 세척액의 증발을 통하여 $K_2CO_3$를 얻을 수 있었고 이를 이용한 활성화실험이 이루어졌다. 그 결과, 비표면적 $2,219m^2/g$의 제조가 가능하였다. $K_2CO_3$가 KOH의 효과적인 대안이라는 것을 고려할 때, 활성탄 제조공정에서 폐수 재이용은 무배출 폐기물 공정에 적용 할 수 있음을 보여주었다.

• 한국콘텐츠학회논문지
• /
• 제15권12호
• /
• pp.407-420
• /
• 2015

본 연구는 연구개발 직군의 실행공동체 영향요인이 공동체 활동 만족도와 조직 내 학습문화 활성화에 미치는 관계를 분석하고, 실행공동체의 성숙도에 따른 성숙 집단과 미성숙 집단의 비교를 통해 기업의 실행공동체 담당자들에게 연구개발 직군의 실행공동체 활성화를 위한 시사점을 제시하고자 했다. 이를 위해 선행연구를 토대로 실행공동체 영향요인을 개인요인, 상호작용요인, 지원요인, 환경요인으로 구성하고, 수집된 총 371개의 설문을 기반으로 분석을 실시했다. 연구결과 연구 개발 직군의 실행공동체 활동에 있어 개인요인, 상호작용요인, 지원요인은 만족도에 유의미한 영향을 미쳤으나 환경요인은 크게 영향을 미치지 않는 것으로 나타났다. 또한 실행공동체 만족도가 높을수록 학습문화 활성화에 긍정적 영향을 미치는 것으로 나타나 연구개발 직군의 실행공동체 활동 강화가 조직문화 개선에 도움을 줄 수 있음을 알 수 있었다. 특히 연구개발 직군의 경우 성숙도에 따른 집단차이가 크게 나타나지 않아 성숙도 보다는 실행공동체 내 상호작용 요인을 강화하는 것이 더욱 중요하다는 사실을 알 수 있다.

• Carbon letters
• /
• 제4권3호
• /
• pp.126-132
• /
• 2003

Granular Activated Carbon (GAC) has been proven to be an excellent material for many industrial applications. A systematic study has been carried out of the kinetics of physical as well as chemical activation of phenolic resin chars. Physical activation was carried out using $CO_2$ and chemical activation using KOH as activating agent. There are number of factors which influence the rate of activation. The activation temperature and residence time at HTT varied in the range $550{\sim}1000^{\circ}C$ and $\frac{1}{2}{\sim}8$ hrs respectively. Kinetic studies show that the rate of chemical activation is 10 times faster than physical activation even at much lower temperature. Above study show that the chemical activation process is suitable to prepare granular activated carbon with very high surface area i.e.$ 2895\;m^2/g$ in short duration of time i.e. 1 to 2 hrs at lower temperature i.e. $750^{\circ}C$ from phenolic resins.