• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.66-71
• /
• 2023

In the case of the Navy, if some of the co-pilots are included in the long-term promotion process due to the limited number of co-pilots, operational flight and administrative tasks will be added to the co-pilots not included in the rest of the Pilot in commander process. Therefore, to solve this problem, the co-pilot who has passed the PQS step-by-step process minimizes the personnel gap in the flight operation unit through a system that evaluates whether it is possible to perform its duties as a co-pilot through actual flight after entering the school. The advantage of the PQS course is that you can control flight plans on your own and minimize gaps in flight and ground work while carrying out the curriculum, but you can't focus on education or improve your skills due to irregular training flight cycles. Therefore, in this study, after collecting opinions on effective flight cycles through a survey of pilots of P-3C, the Navy's fixed-wing aircraft representative, we will analyze the association of aircraft volume performance by flight cycle to derive the optimal flight cycle of the P-3C pilot course.

• Journal of radiological science and technology
• /
• v.47 no.3
• /
• pp.183-195
• /
• 2024

Additional functional upgrades to the large-area compton camera (LACC) measurement device that can provide characteristics evaluation information (nuclear species and radioactivity) and two-dimensional or three-dimensional distribution imaging information of radioactive materials existing in surface or internal of concrete structures are required in terms of work stability and efficiency in order to apply to actual decommissioning sites such as nuclear power plants or medical cyclotron facilities by using this measurement device. To this purpose, the technology that allows radiation workers to intuitively and visually check the distribution of radioactive materials in advance by matching the two-dimensional distribution imaging information of radioactive materials obtained through the LACC measurement device and visual imaging of the measurement zone (10 m × 5 m) was developed. In addition, the separate system that can automatically adjust the position (height) in units of the measurement area size (0.7 m × 0.3 m × 0.8 m) of the LACC measurement device was developed and the integrated management system for characteristics evaluation information and two-dimensional or three-dimensional distribution imaging information obtained per unit of measurement for radioactive materials was developed. These functional upgrades related to LACC measurement device can improve work efficiency and safety when measuring radioactivity of concrete structures and enable the establishment of appropriate decommissioning strategies using radioactivity measurement information for decommissioning nuclear power plants or medical cyclotron facilities.

• Korean journal of food and cookery science
• /
• v.11 no.4
• /
• pp.370-378
• /
• 1995

This study is to seek methods for optimum management of foodservice system for elementary schools in Korea through surveying and analyzing the current status of the "common-management foodservice system" and certain important factors relating to its operations. For the survey of the current status of the "common-management foodservice system", questionnaires are prepared as against schools adopting "common-management system"("Common Schools") as well as schools adopting "conventional management system" ("Conventional Schools") in Kyungsangbookdo ("Kyungbook") area. The survey items are composed of general items, items concerning tasks of dietitians, items concerning purchasing activities and items concerning level of recognition and job-satisfaction of the dietitians. Total 46 dietitians from Common Schools and 65 dietitians from Conventional Schools in Kyungbook region responded the questionnaires. The results of this study are as follows: 1. Information Concerning Dietitians Average age of the dietitians: 26.6 yrs Ratio of two years or less of experiences as school dietitian: Dietitians from Common Schools: 59.1％ Dietitians from Conventional Schools: 50.8％ 2. Types of the Foodservice In both schools, rural type are prevalent; however, between urban types and islands types, the ratio of urban types are larger than the ratio of islands types in Conventional Schools, and the opposite is true in Common Schools. 3. Decision of Suppliers The ratio of dietitian＇s participaion in the decision making reaches only 38.3％, indicating the possibility of problems in quality control and hygienic aspects of the food supply. 4. Factor Analysis of the Foodservice Duties Food supply and general affairs administration work was carried out very well (4.2), while personnel management and operational improvement work (2.8), nutritional education work (2.3), and information related work were poorly carried out. No significant differences were found between the two types of the foodservice management systems. 5. Job Satisfaction scores of Dietitians Dietitians were more satisfied with the works (50.0), supervision (50.5) and co-workers (46.9) than pay (18.0) and promotion (22.3).

• Journal of Engineering Education Research
• /
• v.19 no.2
• /
• pp.97-101
• /
• 2016

This paper examines the industry field training education model, analyze the operational status proposed improvement measures. Data were analyzed using a field training participating students participating industry last three years. On the other hand analysis field training participating students increased, industry participation has decreased. And most of the students took part in the seasonal short-term job training. In addition, it was difficult to analyze the employment status field training operations follow-up member. In this paper, a field training operations support system management models and practical training courses organized field trips how to improve. Field training operations support will be strengthened through the work associated with the company expanding participation model introduced and is expected to increase in the long-term practical training, students participate in field training system improvement. Run the job training Improvement in future research presented in this paper attempts to analyze the students' employment status and results of operations involved.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.51-52
• /
• 1994

High permeability, selectivity and stability are the basic properties also required for membrane gas separations. The $CO_2$ separation by liquid membranes has been developed as a new technique to improve the permeability and selectivity of polymeric membranes. Sirkar et al.(1) have atlempted the hollow-fiber contained liquid membrane technique under four different operational modes, and permeation models have been proposed for all modes. Compared to a conventional liquid membrane, the diffusional resistance decreased by the work of Teramoto et al.(2), who referred to a moving liquid membrane. Recently, Shelekhin and Beckman (3) considered the possibility of combining absorption and membrane separation processes in one integrated system called a membrane absorber. Their analysis could be predicted effectively the performance of flat sheet membrane, however, there are restrictions for considering a flow effect. The gas absorption rate is determined by both an interfacial area and a mass transfer coefficient. It can be easily understood that although the mass transfer coefficients in hollow fiber modules are smaller than in conventional contactors, the substantial increase of the interfacial area can result in a more efficient absorber (4). In order to predict a performance in the general system of hollow-fiber membrane absorber, a gas-liquid mass transfor should be investigated inevitably. The influence of liquid velocity on both a mass transfer and a performance will be described, and then compared with experimental results. A present study is attempted to provide the fundamentals for understanding aspects of promising a hollow-fiber membrane absorber.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.3
• /
• pp.27-41
• /
• 2022

Purpose: In this study, pollutants generated in industrial areas were measured using a Portable Air Quality Measurement System(PAQMS). This study intends to examine in detail improvement measures and operational capabilities to operate a more efficient PAQMS. Research design, data and methodology: This study compares and analyzes the measurement values of the PAQMS and the measurement values of the national air quality measurement network. It is intended to develop a PAQMS corresponding to the data of the national measurement network by minimizing the errors that occur during comparative measurement and analysis and supplementing and improving the problems that occur during the current equipment calibration. Results: A PAQMS is an essential equipment for faster and more accurate measurement and analysis of pollutants in case of untimely measurement and civil complaints due to Micro Climate(local weather and environmental influences). Currently, there are many atmospheric measurement equipment in Korea, but only equipment for each item is produced and sold. Currently, these devices on the market must satisfy various conditions such as stable power, temperature, and humidity to calculate accurate measurement values. Conclusions: Therefore, there is no equipment that satisfies the conditions for performing detailed measurement in the field where accurate measurement is required. In this study, these field work conditions and contents for stable measurement were mentioned in the text.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.2
• /
• pp.115-122
• /
• 2007

The MPC(Moisture Protected Computer) system is completely unique. It was recently invented in Korea and it is a technological break-through in the field of computer systems. It will be instrumental in the development of a complete moisture air-tight capability and will work well in field environments. The MPC includes the following: 1) An enclosed design. 2) Moisture proof computer enclosure joints. 3) System dust protection & an impact buffing system. 4) A normal temperature maintenance system when the temperature inside the computer is low. 5) The ability to generate heat and a radiate system inside the computer 6) An automatic power input sensing controller device. 7) A safety device in case of mis-operation. 8) A proper admission procedure for various tests. Because of the above, and as a result of temperature property experiments, there aren't any operational problems. The result of this treatise could provide very important data for verification of cases involving: using strong materials to protect against explosions, searching for ways to make the size and weight small, and for making repairs easier. As a result, it could achieve price and function competitiveness in advanced countries such as the USA and in Europe.

• Environmental Engineering Research
• /
• v.21 no.3
• /
• pp.297-303
• /
• 2016

Global warming due to greenhouse gases is an issue of great concern today. Fossil fuel power plants, especially coal-fired thermal power plants, are a major source of carbon dioxide emission. In this work, carbon capture and utilization using sodium hydroxide was studied experimentally. Application for flue gas of a coal-fired power plant is considered. Carbon dioxide, reacting with an aqueous solution of sodium hydroxide, could be converted to sodium bicarbonate ($NaHCO_3$). A bench-scale unit of a reactor system was designed for this experiment. The capture scale of the reactor system was 2 kg of carbon dioxide per day. The detailed operational condition could be determined. The purity of produced sodium bicarbonate was above 97% and the absorption rate of $CO_2$ was above 95% through the experiment using this reactor system. The results obtained in this experiment contain useful information for the construction and operation of a commercial-scale plant. Through this experiment, the possibility of carbon capture for coal power plants using sodium hydroxide could be confirmed.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2198-2203
• /
• 2022

As robotics become more sophisticated, there are a growing number of generic systems being used for routine tasks in nuclear environments to reduce risk to radiation workers. The nuclear sector has called for more commercial-off-the-shelf (COTS) devices and components to be used in preference to nuclear specific hardware, enabling robotic operations to become more affordable, reliable, and abundant. To ensure reliable operation in nuclear environments, particularly in high-gamma facilities, it is important to quantify the tolerance of electronic systems to ionizing radiation. To deliver their full potential to end-users, mobile robots require sophisticated autonomous behaviors and sensing, which requires significant computational power. A popular choice of computing system, used in low-cost mobile robots for nuclear environments, is the UP Core single board computer. This work presents estimates of the total ionizing dose that the UP Core running the Robot Operating System (ROS) can withstand, through gamma irradiation testing using a Co-60 source. The units were found to fail on average after 111.1 ± 5.5 Gy, due to faults in the on-board power management circuitry. Its small size and reasonable radiation tolerance make it a suitable candidate for robots in nuclear environments, with scope to use shielding to enhance operational lifetime.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.44-51
• /
• 2005

Water flow in rivers during flood season can be 10 to 100 fold higher than normal seasons (low precipitation) in Japan and predicting flood runoff is essential for operating reservoirs with discharging gates. Abundant experiences and knowledge are requisites for operators to be able to make efficient decisions at work. This research investigated a method to transfer technical knowledge by acquiring skills and knowledge from actual dam operators and by using the information to construct an educational training system. The purpose of the research was to enable the execution of a secure and rational reservoir operation during flood period. The educational training system for reservoir operation was developed with the focuses on acquiring knowledge on hydraulics and hydrology and learning about decision making related to the reservoir operation as well as the timing of control. The system is capable of conducting education that corresponds to individual levels in each location. Of the educational training methods, a lecture method that uses textbooks is effective for the understanding of basic knowledge and concepts while a training method that uses a simulation device is essential for the practice of advanced and specialized procedures in specific fields. Simulation devices are used in operational training for airplane flight and driving cars and trains. The educational system presented here was designed to provide further assistance to those who have acquired basic knowledge and concepts through textbooks and also to at low them to perform the satisfactory operation of dam equipment. Our research proposes a method which can realize a system to acquire technical skills-the skills which are the foundation of technical knowledge and operation.