• 자원환경지질
• /
• 제32권3호
• /
• pp.247-260
• /
• 1999

Geochermical characteristics of the fluvial sediments deprnding on particle size distribution size were investigated in the respect of majir, minor and rare eath element chemisitry. Ratios of $Al_{2}O_{3}/Na_{2}O$ and $K_{2}O/Na_{2}O$ of the sediments show the homogeneous valus, and partly positive correlation with $SiO_{2}/Al_{2}O_{3}$, respecively. Characteristics of minor element ratios (V/Ni, Cr/V, Ni/Co and Zr/Hf)are within the lower and narrow range. Thesesuggested that sediment sources may be acidic to intermediate granitic rock, and may be explained by simple weathering and sedimentation. With increasing SiO2 contents, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO and MgO decreased, but those of $K_{2}O$ and $Na_{2}O$ increased, Concentrations of Ba, Be, Cs, Cu, Li, Ni, Sr, V and Zr show comparatively normal negative and some positive trends. Compared with the mean composition of granite, concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, MnO, CaO and MgO in the sediments of the study area were highly enriced. Among some minor and rare earth elements, concentrations of As, Cd, Cu, and V were enriched, but those of Be, Ce, Rb, Sc, Sr and Zn were depleted when compared with average composition of granite. By decreasing of particle size fractions, SiO2, Rb and Sr conterts decreased, but concentrations of $Al_{2}O_{3}$, $Fe_{2}O_{3}$, CaO, MgO, $TiO_{2}$, MgO, $P_{2}O_{5}$, Be, Cu, Hf, Pb, V and Zr increased. From the correlations between particle size fractions and element concenreations, some elements of $Fe_{2}O_{3}$, CaO, MgO, $P_{2}O_{5}$, Cu, Ni, Zn and Zr showed typical trends in the secondary contramination sediments. These trends are typically shown under 100 mesh fractions. It indicates that the fraction of minus 100 mesh is the optimum size fraction for geochemical and environmental survey.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.370-374
• /
• 2014

Inorganic pigments have high thermal stability and chemical resistance at high temperature. For these reasons, they are used in clay, paints, plastic, polymers, colored glass and ceramics. $CoAl_2O_4$ nano-powder was synthesized by reverse-micelle processing the mixed precursor(consisting of $Co(NO_3)_2$ and $Al(NO_3)_3$). The $CoAl_2O_4$ was prepared by mixing an aqueous solution at a Co:Al molar ratio of 1:2. The average particle size, and the particle-size distribution, of the powders synthesized by heat treatment (at 900; 1,000; 1,100; and $1,200^{\circ}C$ for 2h) were in the range of 10-20 nm and narrow, respectively. The average size of the synthesized nano-particles increased with increasing water-to-surfactant molar ratio. The synthesized $CoAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), field-emission scanning electron microscopy(FE-SEM) and color spectrophotometry. The intensity of X-ray diffraction of the synthesized $CoAl_2O_4$ powder, increased with increasing heating temperature. As the heating temperature increased, crystal-size of the synthesized powder particles increased. As the R-value(water/surfactant) and heating temperature increased, the color of the inorganic pigments changed from dark blue-green to cerulean blue.

• 자원환경지질
• /
• 제46권2호
• /
• pp.199-206
• /
• 2013

대현 금-은광상은 Cambro-Ordovician 석회암질 대리암내에 발달된 NE 방향성의 단열대를 따라 형성된 2개의 열수성 석영맥으로 구성된다. 모암변질시 원소 분산과 이득/손실을 알아보기 위해 모암, 열수변질대 및 금-은 광맥에서 시료를 채취하였다. 모암변질시 뚜렷한 변질대가 관찰되지 않으며 구성광물은 주로 방해석, 돌로마이트, 석영과 소량 녹염석 등이다. 이 광상의 광석광물은 유비철석, 자류철석, 황철석, 섬아연석, 황석석, 황동석, 방연석, 에렉트럼, 자연 창연 및 은 광물 등이 산출된다. 분석된 자료를 기초로, 모암은 주로 $SiO_2$, CaO 및 $CO_2$로 구성되며 소량 $Al_2O_3$, $Fe_2O_3(T)$ 및 MgO 등이 함유되어 있다. 광체로부터 모암으로 감에 따라 $SiO_2$, $Fe_2O_3(T)$, MgO, CaO 및 $CO_2$ 함량은 변화 폭이 크게 관찰된다. 모암변질시 모암의 물리-화학적 물성 때문에 원소 분산은 현저히 관찰되지 않으며 단지 광체 주변부에서만 관찰된다. 모암변질시 이득원소들은 $Fe_2O_3(T)$, 총 S, Ag, As, Bi, Cd, Cu, Ni, Pb, Sb, Sn, W 및 Zn이고 손실원소들은 $SiO_2$, MnO, MgO, CaO. $CO_2$ 및 Sr 이다. 따라서 우리의 결과물은 황강리 광화대내 석회암질 대리암을 모암으로 갖는 광상들의 지화학탐사시 활용될 수 있을 것이다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1124-1125
• /
• 2006

Dry sliding wear behavior of electro-pressure sintered Co-Fe, Co-Ni and Co-Fe-Ni compacts was investigated. Pin-on-disk wear tests were performed on the sintered compacts disk specimens against alumina $(Al_2O_3)$ and silica $(SiO_2)$ ball counterparts at various loads ranging from 3N to 12N. Two sliding speeds of 0.1m/sec and 0.2m/sec and a fixed sliding distance of 1,000m were employed. Worn surfaces and cross sections of them were examined by a scanning electron microscopy, and wear mechanism of the compacts was investigated. Effects of the oxide layer that was formed on wearing surface of the compacts on the wear were also studied.

• 한국자기학회지
• /
• 제13권6호
• /
• pp.231-236
• /
• 2003

Co-페라이트 CoF $e_2$ $O_4$에서 Fe 이온의 소량을 Al 이온으로 치환시킨 시료인 $A_{10.2}$ CoF $e_{1.8}$ $O_4$을 sol-gel 방법으로 제조하여 열처리 온도에 따른 결정학적 및 자기적 특성의 변화를 밝히기 위하여 x-선 회절기, FE-SEM, Mossbauer 분광기, 진동자력계 등을 이용한 측정을 하였다. 결정 구조는 spinel임을 알 수 있었으며, 격자 상수 값은 열처리 온도가 증가함에 따라 837 K 때 8.425 $\AA$에서 1073 K 때 8.321 $\AA$으로 감소하였다. 입자크기는 열처리 온도가 증가함에 따라 673 K 때 약 39 nm에서 1073 K 때 약 108 nm로 크게 증가하였다. 873 K 이상에서 열처리한 시료의 Mossbauer spectrum은 상온에서 F $e^{3+}$ 가 A와 B자리에 위치하여 나타나는 한 세트의 육중선이 중첩된 모양이었는데, 열처리 온도 증가에 따라 A자리의 초미세 자기장 값은 서서히 증가하였으나 B자리의 값은 빠르게 증가하였다. 이성질체 이동값과 사중극자 분열값은 거의 일정하였다. 포화자화는 473 K 때 0.7 emu/g 1073 K 때 72.1 emu/g로 선형적으로 급격히 증가하고, 보자력은 673 K 때 0.951 tOe에서 1073 K 때 0.374 tOe로 급격히 감소하였다.

• 한국가금학회지
• /
• 제31권4호
• /
• pp.213-219
• /
• 2004

본 시험은 깔짚에 3가지 화학제재($FeSO_4,\;AlCl_3\;+\;CaCO_3$ 및 $KMnO_4$)를 처리하였을 때 육계 생산성에 대한 영향과 계사내 암모니아, 이산화탄소 발생량에 대한 6주 동안의 변화와 저감 효과를 규명하기 위해서 수행하였다. 사양시험은 육계 초생추 총 96수(6처리$\times$4반복$\times$4수)를 공시하여 42일 동안 실시하였다. 화학제재는 깔짚 kg당 $FeSO_4$ $\cdot$ $7H_2O$ 200 g, $AlCl_3$ $\cdot$ $6H_2O$ 200 g + $CaCO_3$ 50 g 및 $KMnO_4$ 비율로 top dressing하였으며 대조구는 화학제재를 첨가하지 않았다. 육계 생산성은 화학제재 처리구와 대조구 간에 유의차가 없었다. 그러나 대조구와 비교한 $FeSO_4$와 $AlCl_3$+$CaCO_3$ 처리구의 암모니아 발생량은 6주째에서 각각 $91\%$와 $53\%$가 감소되었고(P<0.05), $KMnO_4$ 처리구의 암모니아 발생량은 대조구보다 6주째에서 $69\%$ 감소되어 통계적 유의차를 보였다(P<0.05). 깔짚에서 생성된 이산화탄소 발생량은 $AlCl_3+CaCO_3$와 $KMnO_4$ 처리구가 대조구와 비교할 때 6주째에서 각각 $59\%$와 $65\%$ 감소되었다(P<0.01). 결론적으로 깔짚에 화학제재를 처리했을 경우 암모니아와 이산화탄소 가스 발생량은 현저하게 감소되며, 육계생산성에는 영향을 주지 않는 것으로 나타났다.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.109-112
• /
• 2005

Electronic and magnetic properties of $Ti_{1-x}M_xO_{2-\delta}$ (M=Co and Fe) thin films grown by sol-gel method have been investigated. Anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films were successfully grown on $Al_2O_3$ (0001) substrates and exhibited p-type electrical conductivity while the undoped films n-type conductivity. Room temperature vibrating sample magnetometry measurements on the anatase and rutile $Ti_{1-x}Co_xO_{2-\delta}$ films with same x ($=4.8 at.{\%}$) showed quite similar magnetic hysteresis curves with the saturation magnetic moment of $\~4 {\mu}_B$ per Co ion despite their differences in structural and electronic properties. Such giant magnetic moment is attributable to the unquenched orbital moment of the $Co^{2+}$ ions substituting the octahedral $Ti^{4+}$ sites. Similar ferromagnetic behavior was observed for $Ti_{1-x}Fe_xO_{2-\delta}$ films that are highly resistive compared to the Co doped samples. Saturation magnetic moment was found to decrease for higher x, i.e., $\~2$ and $\~1.5 {\mu}_B$ per Fe ion for x=2.4 and 5.8 at. $\%$, respectively. Conversion electron $M\ddot{o}ssbauer$ spectroscopy measurements predicted the coexistence of $Fe^{2+}$ and $Fe^{3+}$ ions at the octahedral sites of $Ti_{1-x}Fe_xO_{2-\delta}$.

• 자원리싸이클링
• /
• 제7권3호
• /
• pp.3-10
• /
• 1998

모의폐액으로 제조한 50ppm의 코발트이온을 Fe(III) 및 Al(III)의 응집제와 sodium lauryl sulfate의 계면활성제를 사용하여 흡착 교질 포말부선법으로 제거하였다. 용액의 pH, 계면활성제 농도, Fe(III) 및 Al(III) 농도, 공급기체의 유속 등을 변수로 하여 실험한 결과, Fe(III)를 응집제로 사용한 경우 초기 코발트이온농도 50ppm, pH 8.5, 공급기체유속 $70mell$/min, 제거시간 15분 등의 조건에서 99.8%의 제거율을 나타내었다. 코발트 이온 제거에 앞서 모의폐액에 35% $H_2O_2$를 첨가하여 폐액을 전처리하였다. 그 결과, 최적 pH 및 처리 후 잔존용액의 pH가 낮아졌고, 넓은 범위의 pH에서 높은 제거율을 나타내었다. Fe(III) 50 ppm을 사용하여 코발트이온과 공침시킨 후 20ppm의 Al(III)를 첨가한 결과, Fe(III) 또는 Al(III)를 각각 단독으로 사용하였던 경우에 비하여 제거 가능한 pH 범위가 더욱 더 확대되었다. 이 현상은 zeta potential 의 증가 및 공침효과의 상승요인으로 추측되었다. $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$를 첨가하여 외부이온의 영향을 관찰하였으며, $SO_4^{2-}$가 0.1M 함유된 코발트용액을 Fe(III) 및 Al(III)를 사용하여 처리한 결과 제거효율은 99%를 나타내었다.

• 한국재료학회지
• /
• 제15권4호
• /
• pp.224-232
• /
• 2005

Dry sliding wear behavior of electro-pressure sintered Fe-Ni and Co-Fe-Ni compacts was investigated. Pin-on-disk wear tests were performed on the sintered Fe-Ni, Co-Fe-Ni disk specimens against alumina $(Al_2O_3)$ and silica $(SiO_2)$ ball counterparts at various loads ranging from 3N to 12N. A constant sliding speed of 0.1m/sec was employed. Wear rate was calculated by dividing the weight loss measured after the test by specific gravity and sliding distance. Worn surfaces and cross sections of them were examined by a scanning electron microscopy, and wear mechanism of the compacts was investigated. Wear characteristics of the compacts were discussed as a function of composition of the compacts. Relationship between the wear rate and mechancial properties of the compact was explored, and effects of the oxide layer that was formed on wearing surface of the compacts on the wear were also studied.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.61-66
• /
• 1999

The Spin-dependent tunneling magnetoresistance (TMR) effect was observed in $NiFe/Al_2O_3$/Co thin films. The samples were prepared by magnetron sputtering in a system with a base pressure of $3\times10^{-6}$Torr. the insulating $Al_2O_3$layer was prepared by r.f. plasma oxydation method of a metallic Al layer. The ferromagnetic and insulating layers were deposited through metallic masks to produce the cross pattern form. The junction has an active area of $0.3\times0.3\textrm{mm}^2$ and the $Al_2O_3$layer is deposited through a circular mask with a diameter of 1mm. It is very important that insulating layer is formed very thinly and uniformly in tunneling junction. The ferromagnetic layer was fabricated in optimum conditions and the surface of that was very flat, which was observed by AFM. Tunneling junction was confirmed through nonlinear I-V curve. $NiFe/Al_2O_3$/Co junction was observed for magnetization behavior and magnetoresistance property and magnetoresistance property is dependent on magnetization behavior and magnetoresistance property and magnetoresistance property is dependent on magnetization behavior of t재 ferromagnetic layer. The maximum magnetoresistance ratio was about 6.5%.