• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.31-36
• /
• 2005

This paper describes a research work on the die design for the deep drawing & ironing(D. D. I) of high pressure gas cylinder. D. D. I die set is large-sized die used in horizontal press, which is usually composed of a drawing, and an ironing die. Design method of D. D. I die set is very different from that of conventional cold forging die set. Outer diameter of the die set is fixed because of press specification and that of the insert should be as small as possible for saving material cost. In this study, D. D. I die set has been designed to consider those characteristics, and the feasibility of the designed die has been verified by FE-analysis. In addition, the automated system of die design has been developed in AutoCAD R14 by formulating the applied methods to the regular rules.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권9호
• /
• pp.1274-1281
• /
• 2011

Dietary protein restriction affects lipid metabolism in rats. This study was performed to determine the effect of a low protein diet on hepatic lipid metabolism and insulin sensitivity in growing male rats. Growing rats were fed either a control 20% protein diet or an 8% low protein diet. Feeding a low protein diet for four weeks from 8 weeks of age induced a fatty liver. Expression of acetyl-CoA carboxylase, a key lipogenic enzyme, was increased in rats fed a low protein diet. Feeding a low protein diet decreased very low density lipoprotein (VLDL) secretion without statistical significance. Feeding a low protein diet down-regulated protein expression of microsomal triglyceride transfer protein, an important enzyme of VLDL secretion. Feeding a low protein diet increased serum adiponectin levels. We performed glucose tolerance test (GTT) and insulin tolerance test (ITT). Both GTT and ITT were increased in protein-restricted growing rats. Our results demonstrate that dietary protein restriction increases insulin sensitivity and that this could be due to low-protein diet-mediated metabolic adaptation. In addition, increased adiponectin levels may influences insulin sensitivity. In conclusion, dietary protein restriction induces a fatty liver. Both increased lipogenesis and decreased VLDL secretion has contributed to this metabolic changes. In addition, insulin resistance was not associated with fatty liver induced by protein restriction.

• 생약학회지
• /
• 제48권1호
• /
• pp.63-69
• /
• 2017

Saururus chinensis (Lour.) Baill. (Saururaceae) has been used as a traditional medicine for the treatment of dysuria, leukorrhea, eczema, jaundice and ascites in Korea, China and Japan. Ethanol extract of S. chinensis was successively partitioned as methylene chloride, ethyl acetate, n-butanol and $H_2O$ soluble fractions. Among those fractions the ethyl acetate soluble fraction showed the most potent DPPH radical scavenging and superoxide quenching activities. To verify antioxidant activities of ethyl acetate fraction, we checked the activities of superoxide dismutase (SOD) and catalase, and intracellular ROS level and oxidative stress tolerance in Caenorhabditis elegans. Furthermore, to see if increased stress tolerance of worms by treating of ethyl acetate fraction was due to regulation of stress-response gene, we quantified SOD-3 expression using transgenic strain. Consequently, ethyl acetate fraction elevated SOD and catalase activities of C. elegans, and reduced intracellular ROS accumulation in a dose-dependent manner. Moreover, ethyl acetate fraction-treated CF1553 worms exhibited significantly higher SOD-3::GFP intensity.

• Journal of Welding and Joining
• /
• 제22권6호
• /
• pp.19-24
• /
• 2004

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power $CO_{2}$ laser. The main factor of weld quality of laser welding is gap and edge quality. This work was preformed to focus on the gap tolerance problem during laser welding. First, bead on plate welding of thin sheet was examined to investigate the effect of laser welding variables, and to obtain optimum welding condition. Butt welding was also carried out to show the effect of gap on the laser weldability of thin sheet. In order to investigate the effect of gap on formability of welded thin sheet, LDH test was caried out. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too much heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about $80{\%}$ value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.

• 한국응용과학기술학회지
• /
• 제28권3호
• /
• pp.351-358
• /
• 2011

It was researched to be alternative of TGIC type hardener with human hazard element as PT 910 mix powder paint with hardener. Generally PT 910 was compared with TGIC & Epoxy resin of hardener to be used at thermosetting powder paint. We inquired a property of matter for paint through Gel time, glass transition temperature, melting point and a property of matter for film through a property of adhesion, a property of tolerance, softness, gloss, acid-resistant, alkali-resistant, salt water spray-resistant, facilitation climatic. When PT 910 is used of hardener, it was shown the excellent results in gel time, softness, salt water spray-resistant, fracilitation climatic and the similar results in melting point, a property of tolerance, a property of adhesion, gloss, acid-resistant, alkali-resistant, as compared with the powder paint used by TGIC hardener. The glass transition temperature was little low. But there was slightly different results. After the study results, we reached the conclusion that thermosetting powder used by PT 910 is alterative to by TGIC hardener.

• The Korean Journal of Physiology and Pharmacology
• /
• 제23권6호
• /
• pp.459-466
• /
• 2019

Dipeptidyl peptidase (DPP)-4 inhibitors, or gliptins, are a class of oral hypoglycemic drugs that have been widely used as a second-line treatment for type 2 diabetes. Gliptins, which were introduced for clinical use a decade ago, have been shown to be beneficial against nonalcoholic fatty liver disease/nonalcoholic steatohepatitis (NASH) in animals and humans. Cenicriviroc (CVC), a dual antagonist of C-C chemokine receptor type 2 and 5, is currently under investigation against NASH and fibrosis. It was previously discovered that evogliptin (EVO) reduces hepatic steatosis in diet-induced obese animals but the effectiveness of EVO on NASH remains unexplored. Here, we compared the effectiveness of EVO and CVC against NASH and fibrosis in mice fed a high-fat and high-fructose diet (HFHF). Biochemical and histological analyses showed that mice fed a HFHF for 20 weeks developed severe hepatic steatosis and inflammation with mild fibrosis. Administration of EVO (0.2% wt/wt) for the last 8 weeks of HFHF feeding significantly reduced hepatic triglyceride accumulation, inflammation, and fibrosis as well as restored insulin sensitivity, as evidenced by lowered plasma insulin levels and the improvement in insulin tolerance test curves. Treatment of mice with CVC (0.1% wt/wt) inhibited hepatic inflammation and fibrogenesis with similar efficacy to that of EVO, without affecting hepatic steatosis. CVC treatment also reduced plasma insulin concentrations, despite no improvement in insulin tolerance. In conclusion, EVO administration efficiently ameliorated the development of NASH and fibrosis in HFHF-fed mice, corroborating its therapeutic potential.

• KSBB Journal
• /
• 제14권6호
• /
• pp.742-746
• /
• 1999

새로운 형태의 내부조사형 광생물반응기에서 Chlorella sp. HA-1의 이산화탄소 고정화 특성을 살펴보았다. 높은 이산화탄소 농도에서 균체를 적응시켜 10%와 20%(v/v) 이산화탄소 농도 모두에서 내성을 가지도록 하였다. 그리고 조도, 초기균체농도, pH 등을 조절하여 이산화탄소 고정화양, 372 $gCO_2/m^2{\cdot}day$을 얻었다. 또한 장시간 동안 지속적으로 배출되는 이산화탄소를 제거하기 위한 운전 방법으로 반연속식 배양방법을 사용하여 희석비를 0.1씩 증가시켰을 때 각 단계마다 균체성장속도를 일정하게 유지하는 결과를 얻었다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.369-374
• /
• 2008

This study is an inorganic foaming ceramic by sol-gel reaction in order to overcome weak point of insulator using in construction equipment. We shall be able to confirm as the existing product substitute is possible result of this study. The solution where the silicate, the ceramic powder and the additive are included which makes foaming ceramic slurry, then the insulator made by used $CO_2$ Sol-Gel reaction. There being will be able to manufacture the insulator where the economical efficiency is excellent confirmed at the start product which is completed. The recording gel time decreases when the silicate will increase. Uses the hydrogen peroxide and fe make foam, when additionally surface preparation the fluorine resin, the water tolerance increases and will be able to complement the weak point of the silicate which omits in the water. The case which will use the loess powder with the research method which sees specially was environment-friendly product and according to appearing, the physical properties of nonflammability.

• 센서학회지
• /
• 제11권6호
• /
• pp.358-364
• /
• 2002

본 논문에서는 백금박막 온도센서의 $0^{\circ}C$, $100{\Omega}$ 세팅을 위해 355nm 파장을 갖는 자외선 레이저를 이용하였다. 국제적으로 온도센서의 A-class 기준오차는 $0^{\circ}C$에서 ${\pm}0.060{\Omega}$이다. 실제적으로 이 값은 $0.15^{\circ}C$이하에 해당하는 오차로 저항체 제작시 고정밀 가공 기술을 필요로 한다. 가공에 이용된 355nm DYP(Diode-Pumped YAG) 레이저는 power : 37mW, rep rate 주파수 : 200Hz 그리고 bite size : $7.5{\mu}m$에서 $1{\sim}1.5{\mu}m$ 두께의 백금박막을 가장 안전하게 가공할 수 있었으며, 가공선폭은 $10{\mu}m$ 안팎임을 확인하였다. 그리고 사진식각 공정기술을 이용하여 제작된 $2"{\times}2"$ 기판내의 96개(4 by 24) 저항체는 상온 $25^{\circ}C$에서 $79{\sim}90{\Omega}$ : 42.7%, $91{\sim}102{\Omega}$ : 57.3%의 비율로 각각 제작되어졌다. $109.73{\Omega}$를 목표 값으로 $25^{\circ}C$에서 자외선 레이저를 이용하여 가공한 결과, 82.3%가 가공오차가 ${\pm}0.03{\Omega}$이하에 들어왔으며 나머지 17.7%도 국제규격 A-Class내인 ${\pm}0.06{\Omega}$내에 포함되었다.

• 환경생물
• /
• 제31권4호
• /
• pp.419-428
• /
• 2013

본 연구에서는 미꾸리과 어류인 두 개체군($M_a$, $K_r$)의 생태지표 특성 및 화학적 수질구배를 분석하였고 이를 근거로 기존의 내성도 분류의 타당성을 검토하였다. 각 개체군의 화학적 특성에 따른 분포를 분석한 결과, 모든 수질변수에서 $K_r$-개체군이 좁은 분포 범위를 보였고 $M_a$-개체군이 넓은 분포 범위를 보여 $K_r$-개체군은 깨끗한 수 환경을 선호하며 $M_a$-개체군은 악화된 수환경에 잘 적응하는 것으로 분석되었다. $M_a$-개체군은 공서어종 중 잡식종, 내성종이 우점하는 것으로 나타났지만, $K_r$-개체군은 충식종, 민감종이 우점하는 것으로 나타났다. 서식지에 대한 생태적, 물리적 평가를 실시한 결과, $M_a$-개체군이 낮은 값을 나타내 $M_a$-개체군 분포지점이 비교적 생물학적 교란이 심하며 물리적 서식지가 악화되어 있는 것으로 나타났다. 이에 따라 $M_a$-개체군은 수생태계의 변화에 대한 적응력이 뛰어나며 Kr-개체군은 이러한 변화에 예민하게 반응하는 것으로 판단되어 기존 문헌의 내성도 분류가 타당하다는 것을 시사하였다. 본 연구에서 분석한 각 개체군의 분포특성은 어류를 이용하여 수생태계를 평가하는데 있어 중요한 자료가 될 것으로 사료된다.