• 제목/요약/키워드: Co metal bond

검색결과 118건 처리시간 0.022초

희토류 금속이온 (Ln(III))과 Acetamide 사이의 상호작용에 대한 연구 (Studies on the Coordination of Acetamide to Rare Earth Metal Ion (Ln(II))

  • 이상원;유정아;윤창주;전유혁;최영상
    • 대한화학회지
    • /
    • 제36권2호
    • /
    • pp.205-211
    • /
    • 1992
  • 아세트아미드(AA)의 CO기와 희토류 금속이온(Ln(II))을 포함하는 몇 가지 lanthanide shift reagent(LSR) 사이의 상호작용을 이해하기 위하여 AA의 $2{\nu}_{C=0}$ + amide III 조합띠를 $15^{\circ}$ ${\sim} 45^{\circ}C$에서 조사하였다. 묽은 $CCl_4$ 용액속에서 하나의 AA가 사용된 LSR에 배위되어 1 : 1 AA-LSR 복합체를 이루며, Ln(Ⅲ)이온에 대한 AA의 배위 위치는 카르보닐의 산소임을 알았다. 온도 및 농도에 따른 이 조합띠의 변화로부터 Ln(III)${\cdot}$O=C 결합에 대한 여러가지 열역학적 함수들을 구했다. Eu$(dpm)_3$, Yb$(dpm)_3$ 및 Pr$(dpm)_3$에 대한 AA의 결합의 세기를 나타내는 ${\Delta}H^{\circ}$는 각각 -39.1, -28.4 및 -25.5kJ/mol이다. 이들 값을 비교해보면 AA 분자가 배위될 때 중심금속이온의 ionic potential 효과보다는 이미 배위되어 있는 커다란 dpm 분자에 의한 입체장애효과가 더 큼을 알 수 있다.

  • PDF

미역 폐기물의 중금속 흡탈착 특성 (Biosorption and Desorption of Heavy Metals using Undaria sp.)

  • 조주식;박일남;허종수;이영석
    • 한국환경농학회지
    • /
    • 제23권2호
    • /
    • pp.92-98
    • /
    • 2004
  • 본 연구에서는 생물흡착제인 미역을 사용하여 인공폐액내의 중금속의 흡착 특성을 조사하였으며, 다음과 같은 결론을 얻었다. 미역 폐기물을 이용하여 제조된 생물흡착제의 단일 중금속 흡착효율은 각 중금속 100 mg/L인 용액에 biosorbent 3g을 처리했을 때 Pb는 거의 100%였고, Cu와 Cd가 약 $85{\sim}86%$, Zn과 Cr은 약 $60{\sim}64%$, Co와 Ni은 약 57%, Mn은 약 48%였다. 복합중금속 흡착효율은 단일중금속 흡착효율에 비하여 Pb를 제외한 다른 중금속들은 크게 감소되었으나 biosorbent g당 전체 중금속 흡착량은 더 증가되었다. 온도, pH에 따른 중금속 흡착효율은 별 차이가 없었으며 전반적으로 pH는 pH $5{\sim}6$ 범위, 온도는 $20{\sim}30^{\circ}C$ 범위의 실온이 적당한 것으로 나타났다. 생물흡착제의 흡착평형은 모든 중금속이 1시간 이내에 이루어졌다. Freundlich과 Langmuir 등온흡착식을 구하여 실제폐수처리에 적용여부를 검토한 결과 Pb, Cu, Cr, Cd, Co 순으로 비교적 친화도가 큰 것으로 나타났고, Freundlich 등온 흡착식에 가장 잘 일치하였다. 모든 중금속의 Freundlich 지수 1/n값이 $0.1{\sim}0.5$ 범위에 포함되어 흡착이 용이하고, Pb, Cr, Cu, Cd 순으로 비교적 평형 흡착량이 큰 것으로 나타났으며, 이 결과는 Langmuir 흡착등온식의 결과와 거의 유사하였다. 따라서, 중금속 농도범위에 따른 한계범위를 설정하여 등온흡착식을 적용시키면 매우 높은 중금속 처리효율을 나타낼 것으로 판단된다. 생물흡착제가 중금속 흡착 후의 구조적인 특성을 조사하기 위하여 FT-IR분석 결과, 중금속 이온과 치환될 것으로 생각되는 functional group을 확인할 수 있었으며, 3,400/cm에서의 -OH group, 1,648/cm에서의 C=O bond,1,426/cm에서의 C-O bond그리고 850/cm에서의 S=O등이 전반적으로 중금속 흡착 후에 peak가 커지는 것이 관찰되었다. 생물흡착제의 재사용 가능성을 검토하기 위하여 최적의 중금속 탈착조건 검토하였는데, 탈착제 종류에 따른 중금속 탈착효율은 탈착제 종류와 중금속 종류에 따라 차이가 있었고, 전반적으로 NTA>$H_2SO_4$>HCl>EDTA 순으로 우수하였으며, 전체적으로 특정 중금속의 탈착효율이 떨어지지 않는 NTA가 탈착제로 가장 적합하였다. NTA농도에 따른 중금속 탈착효율은 NTA $0.1{\sim}0.3%$ 농도범위에서는 농도 증가에 따라 탈착 효율도 약간 증가되었으나 그 이상의 농도에서는 별 차이 없었다. 온도와 pH 변화에 따른 중금속 탈착효율은 Cr을 제외한 다른 중금속들은 크게 영향을 받지 않는 것으로 나타났으며 전반적으로 온도는 $30^{\circ}C$, pH는 2에서 높았다. 탈착제 접촉 반응시간에 따른 탈착효율은 10분 이내에 전체 탈착량의 80%이상이 탈착 되었으며 1시간 이후에는 거의 변화가 없었다.

자동차 산업에서 뿌리기술의 중요성 및 최신 용접/접합 기술 (Importance of Fundamental Manufacturing Technology in the Automotive Industry and the State of the Art Welding and Joining Technology)

  • 장인성;조용준;박현성;소득영
    • Journal of Welding and Joining
    • /
    • 제34권1호
    • /
    • pp.21-25
    • /
    • 2016
  • The automotive vehicle is made through the following processes such as press shop, welding shop, paint shop, and general assembly. Among them, the most important process to determine the quality of the car body is the welding process. Generally, more than 400 pressed panels are welded to make BIW (Body In White) by using the RSW (Resistance Spot Welding) and GMAW (Gas Metal Arc Welding). Recently, as the needs of light-weight material due to the $CO_2$ emission issue and fuel efficiency, new joining technologies for aluminum, CFRP (Carbon Fiber Reinforced Plastic) and etc. are needed. Aluminum parts are assembled by the spot welding, clinching, and SPR (Self Piercing Rivet) and friction stir welding process. Structural adhesive boning is another main joining method for light-weight materials. For example, one piece aluminum shock absorber housing part is made by die casting process and is assembled with conventional steel part by SPR and adhesive bond. Another way to reduce the amount of the car body weight is to use AHSS (Advanced High Strength Steel) panel including hot stamping boron alloyed steel. As the new materials are introduced to car body joining, productivity and quality have become more critical. Productivity improvement technology and adaptive welding control are essential technology for the future manufacturing environment.

차체용 1.2GPa급 합금화아연도금 TRIP강의 용접성에 미치는 Weldbond 공정의 효과 (Effect of Weldbond Process on the Weldability of 1.2GPa Grade Galvannealed TRIP Steel for Car Body Manufacturing)

  • 이종대;이혜림;김목순;서종덕;김준기
    • Journal of Welding and Joining
    • /
    • 제34권6호
    • /
    • pp.28-34
    • /
    • 2016
  • Galvannealed(GA) steels are now generally used in car body manufacturing for corrosion resistance. In this study, the weldability and joint mechanical behavior of a newly developed 1.2GPa grade GA ultra high strength TRIP(transformation induced plasticity) steel was investigated for three joining processes, such as adhesive bonding, resistance spot welding and weldbonding. Under both shear and peel stress conditions, the failure mode of the adhesive joints were the mixture of the adhesive cohesive failure, adhesive interface failure and coating layer failure. It means that the adhesion strength of GA coating onto the base metal was similar to that of adhesive bonding onto the GA coating. Under the shear stress condition, the weldbonding exerted to expand the optimal spot welding condition of 1.2GPa GA TRIP steel because the strength of adhesive bond overwhelmed that of the resistance spot weld. Under the peel stress condition, the weldbonding also exerted to expand the optimal spot welding condition of 1.2GPa GA TRIP steel by inducing the tear fracture mode rather than the partial plug fracture mode.

Synthesis and Spectroscopic Characterization of Manganese(II), Iron(III) and Cobalt(III) Complexes of Macrocyclic Ligand. Potential of Cobalt(III) Complex in Biological Activity

  • El-Tabl, Abdou S.;Shakdofa, Mohamad M.E.;El-Seidy, Ahmed M.A.
    • 대한화학회지
    • /
    • 제55권6호
    • /
    • pp.919-925
    • /
    • 2011
  • A new series of manganese(II), iron(III) and cobalt(III) complexes of 14-membered macrocyclic ligand, (3,6,10,13,16,19-hexaazabicyclo[6.6.6]icosane-1,8-diamine) have been prepared and characterized by elemental analyses, IR, UV-VIS, $^1H$- and $^{13}C$- NMR spectra, magnetic susceptibilities, conductivities, and ESR measurements. Molar conductance measurements in DMF solution indicate that the complexes are electrolytes. The ESR spectrum for cobalt(III) complex in $CD_3OD+10%D_2O$ after exposure to $^{60}Co-{\gamma}$-rays at 77 K using a 0.2217 M rad $h^{-1}$ vicrad source showed $g_{\perp}$ > $g_{\parallel}$ > $g_e$, indicating that, the unpaired electron site is mainly present in the $d_z2$ orbital with covalent bond character. In this case, the ligand hyperfine tensors are nearly collinear with ${\gamma}$-tensors, so there is no major tendency to bend. Therefore, little extra delocalization via the ring lobe of the $dz^2$ orbital occurs. However, the ESR spectrum in solid state after exposure to $^{60}Co-{\gamma}$-rays at 77 K showed $g_{\parallel}$ > $g_{\perp}$ > $g_e$, indicating that, the unpaired electron site is mainly present in the $d_x2_{-y}2$ ground state as the resulting spectrum contains a large number of randomly oriented molecules provided that, the principle directions of g and A tensors. Manganese (II) complex 2, $[H_{12}LMn]Cl_4.2H_2O$, showed six isotropic lines characteristic to an unpaired electron interacting with a nucleus of spin 5/2, however, iron(III) complex 3, $[H_{12}LFe]Cl_5.H_2O$, showed spectrum of a high spin $^{57}Fe$ (I=1/2), $d^5$ configuration. The geometry of these complexes was supported by elemental analyses, IR, electronic and ESR spectral studies. Complex 1 showed exploitation in reducing the amount of electron adducts formed in DNA during irradiation with low radiation products.

N1,N2-bis(3-((3-hydroxynaphthalen-2-yl)methylene-amino)propyl)phthalamide의 크롬(III), 망간(II), 철(III), 코발트(II), 니켈(II), 구리(II), 루테늄(III) 및 산화 지르코늄(II) 착물에 대한 합성과 분광학 및 생물학적 연구 (Synthesis, Spectroscopic, and Biological Studies of Chromium(III), Manganese(II), Iron(III), Cobalt(II), Nickel(II), Copper(II), Ruthenium(III), and Zirconyl(II) Complexes of N1,N2-Bis(3-((3-hydroxynaphthalen-2-yl)methylene-amino)propyl)phthalamide)

  • Al-Hakimi, Ahmed N.;Shakdofa, Mohamad M.E.;El-Seidy, Ahemd M.A.;El-Tabl, Abdou S.
    • 대한화학회지
    • /
    • 제55권3호
    • /
    • pp.418-429
    • /
    • 2011
  • [ $N^1,N^2$ ]bis(3-((3-hydroxynaphthalen-2-yl)methylene-amino)propyl)phthalamide ($H_4L$, 1) 의 새로운 크롬(III), 망간(II), 철(III), 코발트(II), 니켈(II), 구리(II), 루테늄(III) 및 산화 지르코늄(II) 착물을 합성하여 원소분석, 물리적 성질 및 분광학적으로 특성을 규명하였다. 분광학적 결과를 통해 이 리간드는 $[H_4LMX_2(H_2O)]{\cdot}nH_2O$ (M = Cu(II), Ni(II), Co(II), X = Cl 또는 $NO_3$)의 일반식을 갖는 착물2-5에서는 중성의 삼배위 리간드로 행동한다. 또는 $[H_4L(ZrO)_2Cl_2]{\cdot}8H_2O$ 의 일반식을 갖는 착물 6-9 에서는 이염기성 육배위 리간드로 행동한다. DMF 용액에서의 몰전기전도도 실험결과 이들 착물은 비이온성을 나타낸다. 고체 구리착물 2, 5 및 6 의 ESR 스펙트럼에서 $g_{\parallel}$ >g> $g_e$을 보이는데, 이는 일그러진 팔면체구조와 큰 공유결합성을 갖는 $d{_x}^2{_{-y}}^2$ 오비탈에 비공유 전자쌍이 존재함을 의미한다. 이합체 구리(II) 착물 $[H_2LCu_2Cl_2(H_2O)_4]{\cdot}3H_2O$ (6)에 대해 두 구리원자 사이의 거리를 ESR 스펙트럼으로부터 추정한 parallel component 의 field zero splitting 파라메타를 이용하여 계산하였다. 이들 화합물의 항박테리아 및 항균 활성도를 측정한 결과, 몇가지 금속 착물의 경우 표준시약인 tetracycline (박테리아) 및 Amphotricene B (균류)보다 더 큰 저해효과를 보였다.

타이타늄의 표면개질에 따른 도재 결합 특성 (THE BOND CHARACTERISTICS OF PORCELAIN FUSED BY TITANIUM SURFACE MODIFICATION)

  • 최택휴;박상원;방몽숙;양홍서;박하옥;임현필;오계정;김현승;이광민;이경구
    • 대한치과보철학회지
    • /
    • 제45권2호
    • /
    • pp.169-181
    • /
    • 2007
  • Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

흥진태맥 석탄광 산성광산배수 침전물의 광물학적 및 지구화학적 특성 (Mineralogical and Geochemical Characteristics of the Precipitates in Acid Mine Drainage of the Heungjin-Taemaek Coal Mine)

  • 신지환;박지연;김영규
    • 자원환경지질
    • /
    • 제54권2호
    • /
    • pp.299-308
    • /
    • 2021
  • 광산 활동에서 비롯된 Fe(II)은 광산 배수를 따라 지표의 산화 환경에 노출되어 다양한 Fe(III)-산화수산화물로 침전된다. 대표적인 Fe(III) 침전 광물 중 하나인 페리하이드라이트는 결정도가 매우 낮아 비표면적이 크기 때문에, 중금속 및 다른 오염물질을 흡착하기에 용이하다. 페리하이드라이트는 자연 환경에서 열역학적으로 좀더 안정적인 침철석으로 전이된다. 페리하이드라이트에서 침철석으로 전이되는 동안 일어나는 중금속의 거동을 예측하기 위해서 산성광산배수에서 일어나는 페리하이드라이트에서 침철석으로의 전이와 이와 연관된 중금속의 유동성에 대한 정보는 중요하다. 광물 전이와 중금속 거동을 분석하기 위해 흥진태맥 석탄광의 산성광산배수 정화 시설의 코어 시료에 대하여 X-선 회절 분석(XRD), 화학 분석, 통계 분석이 시행되었다. XRD 결과는 페리하이드라이트가 코어 시료 상단에서 하단으로 점차 침철석으로 전이되었음을 보여주었다. 화학 분석 결과 코어시료에서 As의 상대적 농도는 배수에 비하여 매우 높아 As가 철옥시수산화물에 강하게 흡착 되었거나 공침되었을 가능성이 큼을 지시한다. 상관 분석 결과 또한 As와 Fe의 높은 친화도를 보여주어, 철광물이 침전하는 동안 As가 광산 배수에서 쉽게 제거될 수 있음을 나타냈다. 코어 시료에서 깊이가 깊어질수록 Fe에 대한 As, Cd, Co, Ni, Zn의 농도비는 대체로 감소하여, 광물 전이 시 배수 내 이들의 농도를 증가시킬 수 있음을 나타냈다. 이와 반대로 Fe에 대한 Cr의 농도는 깊이가 증가할수록 증가하였는데 이 것은 chromate과 철광물과의 화학결합과 페리하이드라이트와 침철석의 표면 전하로 인한 것으로 생각된다.