• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.62-68
• /
• 2003

Ba-ferrite particles added with Co and Ti, which were known well the additives for the control in coercivity, were synthesized by sol-gel method. In the range 90 to 120 minute reaction time, a stable sol solution which showed no change with temperature, pH, viscosity and aging time. After dried and heat treatment of sol solution, Ba-ferrite phase formed at $700^{\circ}C$ with Differential Thermal Analysis(DTA) and X-Ray Diffractometer(XRD) measurement. The crystallinity became to be better with increasing the temperature. It were showed by Scanning Electron Microscopy(SEM) that Ba-ferrite increased to particle sizes as increasing heating temperature and obtained of narrow particles size distribution. Also, magnetic characteristics of Ba-ferrite powders Co and Ti added were observed by a Vibrating Sample Magnetometer(VSM). Saturation magnetization$(M_s)$ was not much changed, however. the coercivity$(H_c)$dramatically dropped with addition of Co and Ti.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.10a
• /
• pp.19-19
• /
• 1997

• Proceedings of the Korean Magnestics Society Conference
• /
• 1992.03a
• /
• pp.52-53
• /
• 1992

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2006

The crystallographic properties and cation distribution of oxyspinels ferrite $Co_xFe_{1-x}O_4$ thin films have been explored by X-ray diffraction, vibrating sample magnetometer (VSM), and conversion electron $M\"{o}ssbauer$ spectroscopy (CEMS). Thin films are prepared by sol-gel method. Normal spinel structure is transformed to inverse spinel structure with increasing Co concentration CEMS results indicate that most of $Fe^{3+}$ ions are substituted to $Co^{3+}$ions. Accordingly $Co^{2+}$ ions on octahedral site migrate to tetrahedral site. Magnetic moment is decreased with increasing Co concentration, which means high spin $Fe^{3+}$ ions are replaced by low spin $Co^{3+}$.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.224-232
• /
• 1983

The effects of ball-milling time on solid state reactions in the system $BaCO_3-Fe_2O_3$ and the magnetic properties of Ba-ferrite 4(BaFe_{12}O_{19})$ have been studied. $BaCO_3-Fe_2O_3 $mixtures were prepared by ball-milling for varying lengths of time; 5, 15, 30, 80 and 200 hours. Techniques employed were thermogravimetry, X-ray diffraction analysis, scanning electron microscopy and B-H curve tracer. It is shown that the aggregation states and superparamagnetic size fractions obtained by increasing ball-milling time have remarkable effects on solid state reactions and magnetic properties of Ba-ferrite.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.191-197
• /
• 2003

Sr ferrites with various compositions were applied to the decomposition of $CO_2$ to mitigate the greenhouse effect. In the reduction reaction of Sr ferrites up to 80$0^{\circ}C$, starting temperature was lower with increasing of Sr content in Sr ferrite. However, the reactivity was higher with decreasing Sr content. In the $CO_2$ decomposition reaction with reduced Sr ferrites, the amount of CO and C were depended on the ratio of Sr and Fe in Sr ferrite. With increasing Sr content. larger amount of C were deposited on the surface of ferrite. Therefore, in order to apply Sr ferrites for the decomposition of $CO_2$, it is necessary to control the ratio of Sr and Fe according to the conditions used.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.82-85
• /
• 2002

High-quality Sr-ferrite sintered magnets have been studied by using mill scale added SrCO$_3$ and oxidents before oxidation process. The pre-added SrCO$_3$ powders were improved the degree of oxidation and crush of mill scale and the magnetic properties of Sr-ferrite sintered magnets. The small added NaNO$_3$ oxidant was also highly improved the degree of oxidation and crush of mill scale and the magnetic properties of Sr-ferrite sintered magnets; 3805 G of remanent flux density, 3240 Oe of intrinsic coercivity, and 3.45 MGOe of maximum energy product.

• Resources Recycling
• /
• v.11 no.5
• /
• pp.16-20
• /
• 2002

This experiment was carried out to examine the effects of La-Co substitution on Sr-ferrite. The magnetic properties of calcined and sintered materials varied with the substitutional amount of La and Co elements in Sr-ferrite. Anisotropy field and coercivity for Sr ferrite were increased with raising La-Co substitution amounts. The microstructure observation for Sr ferrite substituted by La-Co revealed that La-Co inhabited grain growth during calcination and promoted lateral grain growth during sintering. The relationship between $B_{r}$ and $_{i}$ /$H_{c}$ for La-Co substituted Sr-ferrite was found to be $B_{r}$$≒0.097_{i}$ /$H_{c}$/+4500. In case of $SrFe_{12}$ $O_{19}$, $B_{r} was 4090 G and $_{ i}$$H_{c}$ was 3560 Oe, but $B_{r}$ was 4080 G and and $_{i}$ $H_{c}$ was 4800 Oe for $Sr_{0.7}$ $La_{0.3}$ $Fe_{11.7}$ /$Co_{0.3}$ $O_{19}$.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.05a
• /
• pp.74-75
• /
• 1998

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.247-248
• /
• 2000