• Journal of Korean Society on Water Environment
• /
• v.32 no.1
• /
• pp.36-45
• /
• 2016

Sand filters are widely used in infiltration systems to manage polluted urban runoff. Clogging, which is mainly caused by the deposition of sediments on the filter media, reduces the filter system's infiltration capacity, which further limits its lifespan and function. The physical, chemical and biological clogging characteristics of sand filter, therefore, need to be known for effective design and maintenance. Physical clogging behavior and variations in the characteristics of sand filters according to different media depths are examined in this paper. The variations were observed from laboratory column infiltration tests conducted in a vertical flow and fluctuating head condition. It can be seen that an increase in filter media depth results in a high sediment removal performance; however, it leads to a shorter lifespan due to clogging. In the choice of filter media depth to be used in field applications, therefore, the purpose of facilities as well as maintenance costs need to be considered. At all filter media depth configurations, premature clogging occurred because sediments of 100~250 μm clogged the top 15% of filter media depth. Thus, scrapping the top 15% of filter media may be suggested as the first operational maintenance process for the infiltration system.

• Korean Journal of Environment and Ecology
• /
• v.24 no.3
• /
• pp.302-317
• /
• 2010

In this study, not only to present the management plan but also to verify the effectiveness for a area of improving the landscape and the area of creating the base of bio-inhabitation in Tancheon stream concrete embankment where were practised the vegetation-mat measures for greening via monitoring i.e. restoration progress. The results of monitoring, there were a total of 41 taxa, 18 families, 38 species, 3 varieties in 2006, moreover in the 2007, there were a total of 59 taxa, 19 families, 56 species, 3 varieties and in the period 2008, 64 taxa, 29 families, 59 species, 8 varieties. Therefore, these site has increased the plant spaces year by year. The distribution of vegetation characteristics shows that Miscanthus sacchariflorus and Pennisetum alopecuroides expands their influence in the area of applying the construction method. Those area appears a diversity of native species by the stream deposition at the flood. Thus, its condition is very soundly ecological health and eco-friend. At present, native species have been dominant, however, disturbed species and invasive species can be expected to increase dramatically in the future. Therefore, it is necessary to a long-range monitoring and management for maintaining an environmentally sound aquatic ecosystem. On this area refer to mix the river vegetation of primary succession and disturbed vegetation. For that reason, the method of constructing the vegetation-mat measures for greening in embankment does not need to remove the concrete and can install a coir-mat on the top. It leads to improve the landscape, moreover, it was analysed the such dramatic changes in the vegetation species richness by providing continuous the plant growth basis have a impact on in bio-diversity.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.34-39
• /
• 2006

Electrochemical properties of Cu foil current collector with a $Li_{0.5}La_{0.5}TiO_3$ Cu a Si thin film deposited by r.f sputtering as an anode for Li free battery were evaluated. The Cu foil current collectors were lied in and out of plasma during sputtering process. The X-ray diffraction results indicated that the as-deposited Si and $Li_{0.5}La_{0.5}TiO_3$ thin films in and out of plasma did not show any crystalline difference. The $Li_{0.5}La_{0.5}TiO_3$ film in plasma and Si film out of plasma showed better cyclability since crystalline $Li_{0.5}La_{0.5}TiO_3$ has much higher ionic conductivity and crystalline Si film is much sensitive far volume change during charge-discharge process. These results suggested that the deposition of amorphous Si on Cu foil current collector is much better for fabrication of Li free battery and it can be useful for the unique battery with a cycling number constraint of below 10.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6691-6696
• /
• 2015

Background: Endometrial carcinoma is the most common gynecological cancer and its treatment is still controversial, especially in its early stages. There are conflicting data about the efficacy of retroperitoneal lymphadenectomy during abdominal hysterectomy and bilateral salpingoophrectomy treatment. Lymphadenectomy carries a risk of severe complications, especially in women with co-morbidities. Selective lymphadenectomy has been widely employed for staging evaluation of endometrial carcinoma because it is simple and seems to provide reliable data regarding nodal metastasis. This study was designed to evaluate accuracy of sentinel node sampling in detecting lymph node metastasis in primary endometrial carcinoma during staging laparotomy. Materials and Methods: Ninety-three women with endometrial carcinoma at high-risk for nodal metastasis were studied. During laparotomy, methylene blue dye was injected into sub-serosal myometrium, then retroperitoneal spaces were opened and blue lymph nodes within pelvic and para-aortic regions were removed as separate specimens for histopathological examination (sentinel lymph nodes = SLNs). Hysterectomy and selective lymphadenectomy then performed for all women included in this study. Results: Deposition of methylene dye into at least one lymph node was observed in 73.1% (68/93) of studied cases. 18.3% (17/93) of studied women had positive lymph node metastasis and 94.1% (16/17) of them had positive metastasis in SLNs. In this study, SNLs had 94.4% sensitivity and 100% specificity in prediction of lymph node metastasis. Mean number of lymph nodes removed from each case decreased when SLNs biopsy were taken. Conclusions: SLNs are the key lymph nodes in endometrial tumor metastasis and their involvement could be an indicator for whether or not complete systematic lymphadenectomy is needed during staging laparotomy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.122-122
• /
• 1999

Graphite with its advantages of high thermal conductivity, low thermal expansion coefficient, and low elasticity, has been widely used as a structural material for high temperature. However, graphite can easily react with oxygen at even low temperature as 40$0^{\circ}C$, resulting in CO2 formation. In order to apply the graphite to high temperature structural material, therefore, it is necessary to improve its oxidation resistive property. Silicon Carbide (SiC) is a semiconductor material for high-temperature, radiation-resistant, and high power/high frequency electronic devices due to its excellent properties. Conventional chemical vapor deposited SiC films has also been widely used as a coating materials for structural applications because of its outstanding properties such as high thermal conductivity, high microhardness, good chemical resistant for oxidation. Therefore, SiC with similar thermal expansion coefficient as graphite is recently considered to be a g행 candidate material for protective coating operating at high temperature, corrosive, and high-wear environments. Due to large lattice mismatch (~50%), however, it was very difficult to grow thick SiC layer on graphite surface. In theis study, we have deposited thick SiC thin films on graphite substrates at temperature range of 700-85$0^{\circ}C$ using single molecular precursors by both thermal MOCVD and PEMOCVD methods for oxidation protection wear and tribological coating . Two organosilicon compounds such as diethylmethylsilane (EDMS), (Et)2SiH(CH3), and hexamethyldisilane (HMDS),(CH3)Si-Si(CH3)3, were utilized as single source precursors, and hydrogen and Ar were used as a bubbler and carrier gas. Polycrystalline cubic SiC protective layers in [110] direction were successfully grown on graphite substrates at temperature as low as 80$0^{\circ}C$ from HMDS by PEMOCVD. In the case of thermal MOCVD, on the other hand, only amorphous SiC layers were obtained with either HMDS or DMS at 85$0^{\circ}C$. We compared the difference of crystal quality and physical properties of the PEMOCVD was highly effective process in improving the characteristics of the a SiC protective layers grown by thermal MOCVD and PEMOCVD method and confirmed that PEMOCVD was highly effective process in improving the characteristics of the SiC layer properties compared to those grown by thermal MOCVD. The as-grown samples were characterized in situ with OES and RGA and ex situ with XRD, XPS, and SEM. The mechanical and oxidation-resistant properties have been checked. The optimum SiC film was obtained at 85$0^{\circ}C$ and RF power of 200W. The maximum deposition rate and microhardness are 2$mu extrm{m}$/h and 4,336kg/mm2 Hv, respectively. The hardness was strongly influenced with the stoichiometry of SiC protective layers.

• Progress in Medical Physics
• /
• v.29 no.2
• /
• pp.47-52
• /
• 2018

To investigate the effect of low magnetic field on dose distribution in SABR plans for liver cancer, we calculated and evaluated the dose distribution to each organ with and without magnetic fields. Ten patients received a 50 Gy dose in five fractions using the $ViewRay^{(R)}$ treatment planning system. For planning target volume (PTV), the results were analyzed in the point minimum ($D_{min}$), maximum ($D_{max}$), mean dose ($D_{mean}$) and volume receiving at least 90% ($V_{90%}$), 95% ($V_{95%}$), and 100% ($V_{100%}$) of the prescription dose, respectively. For organs at risk (OARs), the duodenum and stomach were analyzed with $D_{0.5cc}$ and $D_{2cc}$, and the remained liver except for PTV was analyzed with $D_{mean}$, $D_{max}$, and $D_{min}$. Both inner and outer shells were analyzed with the point $D_{min}$, $D_{max}$, and $D_{mean}$, respectively. For PTV, the maximum change in volume due to the presence or absence of the low magnetic field showed a percentage difference of up to $0.67{\pm}0.60%$. In OAR analysis, there is no significant difference for the magnetic field. In both shell structure analyses, although there are no major changes in dose distribution, the largest value of deviation for $D_{max}$ in the outer shell is $2.12{\pm}2.67Gy$. The effect of low magnetic field on dose distribution by a Co-60 beam was not significantly observed within the body, but the dose deposition was only appreciable outside the body.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.5
• /
• pp.291-297
• /
• 2005

This study evaluated the quality of commercial extruded pellet (EP) diet of five companies (A, B, C, D and E) for olive flounder Paralichtys olivaceus by biochemical analyses, physical properties and growth performance. The proximate analyses of five EP diets showed $3.2-10.0\%$ of moisture, $49.3-55.5\%$ of crude protein, $4.6-14.7\%$ of crude lipid, $7.0-13.8\%$ of crude ash, $0.7-10.5\%$ of crude fiber, $10.0-27.3\%$ of itrogen free extract (NFE), 304.3-395.4kcal/100g of digestible energy (DE) and 6.1-7.1 of calorie/protein ratio (C/P). Peroxide value (POV) was highest in diet D (47.4 meq/kg) as compared to other diets which in the range of 4.0-11.7 meq/kg. Total amino acid contents were ranged from 46.54 to $55.46\%$ with the highest content in diet B and the lowest content in diet C. Essential amino acid of diet C was lowest $(7.43\%)$ as compared to other diets which in the range of $19.43-20.30\%$. Saturated fatty acid was higher in diet A $(37.65\%)$ followed by diet B $(36.32\%)$, diet E$(34.39\%)$, diet C$(30.95\%)$ and diet D$(30.10\%)$. EPA+DHA were highest in diet E$(30.78\%)$ and lowest in diet C$(15.48\%)$. The floating rate after 6 hours on the sea water was highest in diet C$(100\%)$ followed by diet B$(40\%)$ and A$(10\%)$. However, diets D and E were completely settled down after 1 and 2 hours, respectively. The range of relative expansion rate was $27.2-49.3\%$ for all diets and all reached the peak at 2-3 hours. The water absorption rate of diets C and D was lowest, and diet E was highest at 1 hour after deposition of sea water. Growth rate was higher in diet B$(22.3\%)$ and E$(21.3\%)$. Feed efficiency was higher in diet A$(109.7\%)$ and E$(105.3\%)$ and was significantly lowest in diet D$(80.7\%)$. The protein efficiency ratio was highest in diet E (2.72) and lowest in diet D (1.76). These results suggest that there is a necessity for improvement of nutrients balance and feed physical properties to fulfill the nutrient requirements and digestive characteristics of fishes in commercial EP diets.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.143-143
• /
• 2017

CrAlN 코팅은 높은 경도, 낮은 표면 조도 등의 상온에서의 우수한 기계적 특성 이외에 고온에서 안정한 합금상의 형성으로 인하여 우수한 내산화성 및 내열성을 보유하여 공구 코팅으로의 적용 가능성이 크다. 그러나 최근 공구사용 환경의 가혹화로 인하여 코팅의 내마모성 및 내열성 등의 물성 향상을 통한 공구의 수명 향상이 필요시 되고 있으며, 다양한 코팅 물질을 활용하여 다층 코팅을 합성함으로써 난삭재용 공구 코팅의 물성을 높이는 연구들이 진행되고 있다. 본 연구에서는 CrAlN 코팅과 WC-Co 6wt.% 모재 사이에 CrZrN, CrN, CrN/CrZrSiN 등의 중간층을 합성하여 CrAlN 코팅의 상온 및 고온 특성을 향상시키는 연구가 진행되었다. 합성된 코팅의 구조 및 물성을 분석하기 위해 field emission scanning electron microscopy(FE-SEM), nano-indentation, atomic force microscopy(AFM) 및 ball-on-disk wear tester를 사용하였다. 코팅의 고온 특성을 확인하기 위해 코팅을 furnace에 넣어 공기중에서 30분 동안 annealing 한 후에 nano-indentation을 사용하여 경도를 측정하였고, $500^{\circ}C$ annealing 코팅의 표면 조도 분석 및 $500^{\circ}C$에서 마찰마모시험을 실시하였다. CrAlN 코팅의 상온 특성을 분석한 결과, 모든 코팅의 경도(35.5-36.2 GPa)와 탄성계수(424.3-429.2 GPa)는 중간층의 종류에 상관없이 비슷한 값을 보인 것으로 확인됐다. 그러나, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅의 마찰계수는 0.33로 CrZrN 중간층을 증착한 CrAlN 코팅의 마찰계수(0.41)에 비해 향상된 값 보였으며, 코팅의 마모율 및 마모폭도 비슷한 경향을 보인 것으로 보아 코팅의 내마모성이 향상된 것으로 판단된다. 이것은 중간층의 H/E ratio가 코팅의 내마모성에 미치는 영향에 의한 결과로 사료된다. H/E ratio는 파단시의 최대 탄성 변형율로써, 모재/중간층/코팅의 H/E ratio 구배에 따라 코팅 내의 응력의 완화 정도가 변하게 된다. WC 모재 (H/E=0.040)와 CrAlN 코팅(H/E=0.089) 사이에서 CrN, CrZrSiN 중간층의 H/E ratio는 각각 0.076, 0.083 으로 모재/중간층/코팅의 H/E ratio 구배가 점차 증가함을 확인 할 수 있었고, 일정 응력이 지속적으로 가해지면서 진행되는 마모시험중에 CrN과 CrZrSiN 중간층이 WC와 CrAlN 코팅 사이에서 코팅 내부의 응력구배를 완화시키는 역할을 함으로써 CrAlN 코팅의 내마모성이 향상된 것으로 판단된다. 내열성 시험 결과, CrN/CrZrSiN 중간층을 증착한 코팅은 $1,000^{\circ}C$까지 약 28GPa의 높은 경도를 유지한 것으로 확인 되었다. $500^{\circ}C$ annealing 후 진행된 표면 조도와 마모시험 결과, 모든 코팅의 조도 값 및 마찰계수는 상온 값에 비해 증가하였으며 CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅의 변화량이 가장 낮은 값을 보였다. 이는 CrZrSiN 중간층 내에 존재하는 $SiN_x$ 비정질상이 고온 annealing시에 산소 차폐막 역할을 하여, 코팅내의 잔류 산소에 의한 산화작용을 효과적으로 방지함으로써 코팅의 고온 특성이 향상된 것으로 판단된다.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.345-352
• /
• 2006

Korean native cattle (Hanwoo) have a good capacity to produce heavily marbled meat of high value. The intramuscular fat in Hanwoo is known to be deposit from 12 months of age by degree of slightly visible and significantly developed in 28 months of age. Lipogenesis gene expression profiling in longissimus dorsi at early and late fattening stage will be helpful to understand the mechanism of intramuscular fat deposition in skeletal muscle. Therefore, we analysed the gene expression patterns of six genes related lipid metabolism (FABP4, GLUT4, LPL, ACC, ACL and SCD) between early and late fattening stage. The mRNA expression of FABP4 at late fattening stage (27 months old) was higher about 3.0 fold than at early fattening stage (12 months old) in each three individuals of Hanwoo. However, GLUT4 mRNA expression was not different at late fattening stage compared with at early fattening stage. On the other hand, The expression patterns of LPL, ACC, ACL and SCD genes related lipid metabolism were significantly over-expressed about 3.5 fold, 2.7 fold, 3.7 fold and 7.5 fold at late fattening stage, respectively. Thus, these results suggested that lipogenesis in skeletal muscle at late fattening stage is due to increasing uptake of fatty acid by FABP4 and lipogenesis gene expression such as LPL, ACC, ACL and SCD.

• Journal of Embryo Transfer
• /
• v.6 no.2
• /
• pp.1-17
• /
• 1991

It is widely recognized that the embryonic or fetal loss after breeding is common in the cattle and that it is an important factor affecting reproductive efficiency. The causes of this loss have been subject of extensive researches and the results indicate that the embryonic mortality may he primary factor responsible for low pregnancy rates in non-embryo transfer bovine populations as well as embryo transfer programs. However, it's causes are still not clearly understood. The embryonic mortality or pregnancy rate has been influenced by various embryonic and maternal effects related to genetic and environmental factors. The timing and extent of embryonic mortality vanes greatly according to authors and estimating methods, because it is difficult to make direct measurements. The major important factors that may influence the embryonic losses or pregnancy rates after embryo transfer can be summeirized. 1.When an embryo is transferred to unmated recipients, the contralateral transfer to corpus luteum results in a lower survival rate than ipsilateral deposition. When the embryos are transferred for the production of twin calves, their survivals and twin pregnancies have quite inconsistent according to the transfer methods either to the unmated-synchronized or already mated recipients and more works are needed to accurrately clarify the previous results. 2.Although embryos can be cultured in vitro some hours without the great declines in pregnancy rates, the rates differ markedly among culture times and media but may be improved by co-transfer systems. 3.Embryo developmental stages and quality grades clearly affect the survival rate following freezing and the pregnancy rate after transfer and the selection of embryos without chromosome abnormalities and of high fertile semen may also be considered to increase the pregnancy rates. 4.Many researches have attempted to relate the plasma progesterone levels to pregnancy rates and others have done either direct progesterone supplementation or luteal stimulation by hCG treatment in order to increase the pregnancy rates. However, these effects on pregnancy rates are inconsistent and also contradictory. 5.The asynchrony between donors or embryos and recipients may he a major cause of embryo death and low pregnancy rate and the sensitivity to uterine asynchyony differs in according to the quality and stages of embryos. 6.The extremes of poor or over nutrition during early pregnancy in the recipients are detrimental to the survival of embryos and the good body condition is required to prevent a reduejion of pregnancy rates. The uterine pathogens in embryonic mortality or fertility have been questioned but the infection of C.pyogenes and Campylobacter fetus is still important pathogens. 7.The heat stress during early pregnancy may reduce conceptus weight and possibly increase the embryonic mortality.