• Korean Chemical Engineering Research
• /
• 제52권5호
• /
• pp.678-687
• /
• 2014

The catalytic performance of silicon carbide supported nickel catalysts modified with or without second metal (Co, Cu and Zn) for the methanation of CO has been investigated in a fixed-bed reactor using a feed consisting of 25% CO and 75% $H_2$ without any diluent gas. It has been found that the introduction of Co species can clearly improve the catalytic activity of Ni/SiC catalyst, whereas the addition of Cu or Zn can result in a significant decrease in the catalytic activity. The characterizations by means of XRD, TEM, XPS, CO-TPD and $H_2$-TPR indicate that the addition of Co could decrease the particle size of active metal, increase active sites on the surface of methanation catalyst, improve the chemisorption of CO and enhance the reducibility of methanation catalysts. Additionally, the special interaction between Co species and Ni species is likely favorable for the dissociation of adsorbed CO on the surface of catalyst, and this may also contribute to the high activity of 5Co-Ni/SiC catalyst for CO methanation reaction. For 5Cu-Ni/SiC catalyst and 5Zn-Ni/SiC catalyst, Cu and Zn species could cover partial nickel particles and decrease the chemisorption amount of CO. These could be responsible for the low methanation activity. In addition, a 150h stability test under 2 MPa and $300^{\circ}C$ showed that 5Co-Ni/SiC catalyst was very stable for CO methanation reaction.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.883-891
• /
• 2017

고분자 전해질 연료전지의 연료에 포함된 일산화탄소의 선택적 산화를 위하여, 귀금속 촉매를 대체하기 위한 CuO-$CeO_2$ 복합 산화물 촉매를 졸-겔법과 공침법으로 제조하였다. 졸-겔법으로 촉매 제조 시 Cu/Ce의 비와 가수분해 비를 변화시켰다. 제조한 촉매의 활성은 귀금속 촉매($Pt/{\gamma}-Al_2O_3$)와 비교하였다. Cu/Ce의 비를 변화시키면서 제조한 촉매 중 Cu/Ce의 비가 4:16인 촉매가 가장 높은 CO 전환율(90%)과 선택도(60%)를 나타내었다. 촉매의 제조에서 가수분해 비가 증가할수록 촉매 표면적이 증가하였고, 아울러 촉매 활성 또한 증가하였다. 공침법으로 제조한 촉매와 1wt% $Pt/{\gamma}-Al_2O_3$ 촉매의 가장 높은 CO 전환율은 각각 82% 및 81%인 반면, 졸-겔법으로 제조한 촉매의 경우는 90%가 얻어졌다. 이는 졸-겔법으로 제조한 촉매가 공침법으로 제조한 촉매나 귀금속 촉매보다 더 높은 촉매활성을 보임을 의미한다. CO-TPD 실험을 통하여, 낮은 온도($140^{\circ}C$)에서 CO를 탈착하는 촉매가 본 반응에서 더 높은 촉매활성을 보임을 알 수 있었다.

• 한국대기환경학회지
• /
• 제21권6호
• /
• pp.625-630
• /
• 2005

This study was focused on the catalytic activity for the combustion of low-concentration methane using various commerical catalysts (six transition metal catalysts in Russia and one rare earth metal (Honeycomb) catalyst in Korea). Catalytic activity was strongly influenced by the type and loading content of metal supported in catalyst. Catalytic performance showed the highest activity in Honeycomb catalyst including rare earth metal, which was the most expensive catalyst, while the next was the catalyst supported Cu with high content (AOK-78-52) and also that supported Cr and Co (AOK-78-56). However, both AOK-78-52 and AOK-78-56 catalysts that were very cheap had lower activation energy than Honeycomb catalyst. In the economical field, both AOK-78-52 and AOK-78-56 catalysts with transition metals showed a good alternative catalyst on the combustion of methane.

• 청정기술
• /
• 제28권2호
• /
• pp.154-162
• /
• 2022

알루미늄 (Al) 금속을 전구체 및 구조체로 이용, 수열 반응을 통하여 Al@Al₂O₃와 Al@Ni-Al LDH (LDH = layered double hydroxide) 코어-쉘 복합 구조체를 합성하였다. 제조된 구조체의 형상, 조성, 결정 구조는 수용액에 존재하는 이온들에 의하여 크게 영향을 받았으며, 이를 활용하여 다양한 특성의 촉매 구조체 유도가 가능하였다. Al@Ni-Al LDH 코어-쉘 구조체의 환원을 통하여 Ni 나노 입자가 고정화된 Ni/Al@Al₂O₃ 촉매를 제조하였고, CO₂ 메탄화 반응에 적용하여 촉매의 특성을 평가하였다. Ni/Al@Al₂O₃ 촉매는 전통적 incipient wetness impregnation 방법에 의하여 제조된 Ni/Al₂O₃ 촉매에 비교하여 Ni 입자의 분산도와 균일성이 매우 높았으며 약 2 배 이상의 CO₂ 전환율로 높은 촉매적 활성과 더불어 구조의 안정성을 보여 주었다. 이러한 Ni/Al@Al₂O₃ 구조체 촉매의 우수한 특성은 Al 금속을 기반으로 한 새로운 개념의 촉매 구조체 설계와 합성 방법의 타당성을 보여준다.

• 전기화학회지
• /
• 제16권1호
• /
• pp.52-58
• /
• 2013

고분자 전해질 연료전지(Polymer Electrolyte Membrane Fuel Cell, PEMFC) 상용화를 위해 해결해야 할 과제 중의 하나인 가격 저감을 이루기 위한 방법으로 백금 촉매를 대신할 비귀금속(non-precious metal) 촉매 제조에 관한 연구를 수행하였다. 비귀금속 촉매의 합성은 산소환원반응(oxygen reduction reaction, ORR)의 활성점으로 알려져 있는 코발트-질소(Co-N) 결합을 형성하기 위해 질소를 포함하는 폴리아닐린(PANI)과 코발트염(Co precursor), 그리고 카본 블랙(C)을 일정한 비율대로 혼합한 후 특별한 열처리 과정 없이 단순한 화학적 환원법에 제조되었다. 제조된 Co-PANI-C 복합 촉매의 구조 분석을 위해 X-선 회절분석(X-ray diffraction, XRD)과 열중량분석(thermogravimetric analysis, TGA)을 실시하였고, ORR에 대한 활성을 평가하기 위해 rotating disk electrode(RDE) 및 rotating ring disk electrode(RRDE) 측정을 수행하였다. 그 결과 Co-PANI-C 복합 촉매는 ORR반응에 대한 개시 전압은 백금 촉매보다 60 mV 밖에 낮지 않은 값을 보였지만, 반응에 의해 발생되는 환원 전류는 여전히 백금 촉매보다 낮은 값을 보였다. 이 밖에도 전극 회전 속도에 따른 ORR 특성 변화, 전압 사이클 회수에 따른 내구성 변화, 연료전지 적용 시 성능 변화에 대해 논의할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1378-1379
• /
• 2006

Carbon nanotubes (CNTs) with few defects and very small amount of amorphous carbon coating have been synthesized by catalytic decomposition of acetylene in $H_2$ over well-dispersed metal particles supported on MgO. The yield, quality and diameters of CNTs were obtained by control of catalyst metal compositions to be used. The optimization condition of carbon nanotubes with high yield is when Co and Mo are in a 1:1 ratio and Fe metal contents to Co is increased on magnesium oxide support. It is also found that the diameter of the as-prepared CNTs can be controlled mainly by adjusting the molar ratio of Fe-Mo, Co-Fe, and Co-Mo versus the MgO support. Our results indicated that desired diameter distribution of CNTs is obtained by choosing or combining the catalyst to be employed.

• 한국결정성장학회지
• /
• 제26권6호
• /
• pp.238-242
• /
• 2016

알칼리(토)금속이 SCR(Selective Catalytic Reduction) 촉매 비활성화에 미치는영향을 미세구조, 촉매 비표면적, 기공 부피 변화, 탈질 성능 분석을 통해 규명하였다. 신촉매를 $350^{\circ}C$에서 6시간 동안 $H_3PO_4$, $K_2CO_3$, $Na_2CO_3$, $Ca(CH_3COO)_2{\cdot}H_2O$, $C_4H_6MgO_4{\cdot}4H_2O$ 수용액을 분사 시켜, 모사 피독된 SCR 촉매를 제조하였다. 피독 촉매 표면의 미세구조는 신촉매와 거의 유사한 형태를 보이지만, 비표면적과 기공 부피 변화를 신촉매와 비교하였을 때, Na < Mg < K < Ca < P 순으로 감소하는 것으로 나타났다. 특히 Na에 의해 피독된 촉매는 비표면적은 $10.20m^2/g$, 기공부피는 $0.061cm^2/g$ 정도 감소하였다. $150{\sim}450^{\circ}C$에서 신촉매 및 피독 촉매의 탈질성능을 평가한 결과, 알칼리 금속(K, Na)에 피독된 SCR 촉매가 가장 낮은 탈질효율을 보였으며, 알칼리 토금속(Ca, Mg)에 피독된 SCR 촉매는 알칼리 금속(K, Na)에 피독된 촉매에 비해 상대적으로 높은 탈질 효율을 보였으며, 인(P)에 의해 피독된 촉매는 SCR 신촉매와 거의 유사한 탈질 성능을 나타내는 것을 확인하였다. 이러한 결과는 SCR 촉매 비표면적이나 기공 부피 감소에 따른 물리적인 비활성화가 SCR 촉매 탈질 성능에 영향을 미치는 것으로 보인다.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.541-548
• /
• 2014

This study was performed to obtain high conversion efficiency of $C_7H_8$ using non-thermal plasma and metal-supported catalyst. Adsorption-desorption characteristics of toluene was performed using 4A type (Zeolite) filled in a concentration reactor. Through this test, it was found that the concentration reactor has 0.020 g/g of adsorption capacity (at ambient temperature and pressure) and 3,600 ppm of desorption property at $150^{\circ}C$ (with in 20 min). In case of developed catalyst, toluene decomposition rate of Pd-AO (Pd coated catalyst) was better than Pd/Cu-AO and Pd/Ag-AO (Pd/Ag composite metal catalyst). Developed non-thermal plasma system was obtained flame amplification effect using injection process of desorbed tolune, and 98% of removal efficiency.

• 에너지공학
• /
• 제28권4호
• /
• pp.8-12
• /
• 2019

Thermal amine scrubbing is the most advanced CO₂ capture technique but its largescale application is hindered due to the large heat requirement during solvent regeneration step. The addition of a solid metal oxide catalysts can optimize the CO₂ desorption rate and thus minimize the energy consumption. Herein, we evaluate the solvent regeneration performance of Monoethanolamine (MEA) and Diethanolamine (DEA) solvents without and with two metal oxide catalysts (TiO₂ and V₂O₅) within a temperature range of 40-86℃. The solvent regeneration performance was evaluated in terms of CO₂ desorption rate and overall amount of CO₂ desorbed during the experiments. Both catalysts improved the solvent regeneration performance by desorbing greater amounts of CO₂ with higher CO₂ desorption rates at low temperature. Improvements of 86% and 50% in the CO₂ desorption rate were made by the catalysts for MEA and DEA solvents, respectively. The total amount of the desorbed CO₂ also improved by 17% and 13% from MEA and DEA solvents, respectively. The metal oxide catalyst-aided regeneration of amine solutions can be a new approach to minimize the heat requirement during solvent regeneration and thus can remove a primary shortfall of this technology.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2019년도 정기학술대회 발표논문집
• /
• pp.83-83
• /
• 2019

Increasing the CO₂ concentration in the atmosphere induce high temperature and rising sea levels. So the technology that capture and reuse of the CO₂ have been recently become popular. Among other methods, CRR(CO2₂ reduction reaction) is typical method of CO₂ reusing. Electrocatalyst can show more higher efficiencies in CRR than photocatalyst because it doesn't use nature source. Nowadays, finding high efficient electrocatalyst by controlling electronic (affected by stoichiometry) and geometric (affected by atomic arrangement) factors are very important issues. Mono-atomic electro-catalyst has limitations on controlling binding energy because each intermediate has own binding energy range. So the Multi-metallic electro-catalyst is important to stabilize intermediate at the same time. Carbon monoxide(CO) which is our target product and important feedstock of useful products. Au is known for the most high CO production metal. With copper, Not only gold/copper has advantages which is they have FCC packing for easily forming solid solution regardless of stoichiometry but also presence of adsorbed CO on Cu promotes the desorption of CO on Au because of strong repulsion. And gold/copper bi-metal catalyst can show high catalytic activity(mass activity) although it has low selectivity relatively Gold. Actually, multi-metallic catalyst structure control method is limited in the solution method which is takes a lot of time. In here, we introduce CTS(carbo thermal shock) method which is using heat to make MMNP in a few seconds for making gold-copper system. This method is very simple and efficient in terms of time(very short reaction time and using carbon substrate as a direct working electrode) and increasing reaction sites(highly dispersed and mixing alloy structures). Last one is easy to control degree of mixing and it can induce 5 or more metals in one alloy system. Gold/copper by CTS can show higher catalytic activity depending on metal ratio which is altered easily by changing simple variables. The ultimate goals are making CO₂ test system by CTS which can check the selectivity depending on metal types in a very short time.