• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.83-90
• /
• 2009

A new IRF (Impulse Response Function) analysis technique in high resolution SAR image is presented by taking into account the real clutter environment. In order to investigate the realistic effect of clutter background on the impulse response function of SAR image, an ideally generated impulse response function is superimposed with a large number of background clutter data which are extracted from the various regions of an actual SAR image. As a performance measure, PSLR (Peak Sidelobe Ratio) of the clutter-contained IRF is presented in the various groups of clutter background, and finally the results are compared with the stochastic model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.175-181
• /
• 2014

In this paper, we propose a robust clutter pre-thresholding method using background adaptive Threshold Map for the clutter rejection in the complex coastal environment. The proposed algorithm is composed of the use of Threshold Map's and method of its calculation. Additionally we also suggest an automatic decision method of Thresold Map's update. Experimental results on some sets of real infrared image sequence show that the proposed method could remove clutters effectively without any loss of detection rate for the aim target and reduce processing time dramatically.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.59-64
• /
• 2011

Ultra wideband radars attract considerable attention as a short range automotive radar because of its high range resolution. Radar signal reflected from a target often contains unwanted echoes called as clutter, so the detection of target is difficult due to clutter echoes. Therefore, it is important to investigate the radar detector for better detecting from the reflected signals. In this paper, the optimal detector is obtained for various mean and variance value in log-normal clutter environment. The types of non-coherent detectors used are square law detector, linear detector, and logarithmic detector. The performances of detectors are compared in log normal clutter environment and the suitable detector is determined for automotive short range radar application.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.2
• /
• pp.31-36
• /
• 2020

Most of the background subtraction algorithms show good performance in static scenes. In the case of dynamic scenes, they frequently cause false alarm to "temporal clutter", a repetitive motion within a certain area. In this paper, we propose a robust technique for the multiple interval pixel sampling (MIS) algorithm to handle highly dynamic scenes. An adaptive threshold scheme is used to suppress false alarms in low-confidence regions. We also utilize multiple background models in the foreground segmentation process to handle repetitive background movements. Experimental results revealed that our approach works well in handling various temporal clutters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.89-96
• /
• 2013

This paper presents an improved clutter signal removal algorithm using Singular Value Decomposition(SVD). For indoor positioning system using IR-UWB Radar, the target signal is extracted from received signal. We use clutter signal removal algorithm using SVD for target signal extraction. Clutter signal removal algorithm using SVD has the advantage of operation but the disadvantage of high computational complexity. In this paper, we propose a method to improve computational complexity. As the experimental results, it is confirmed that the method presented in this paper improve the computational complexity of clutter removal algorithm using SVD.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.99-106
• /
• 2008

A synthetic aperture radar (SAR) system is of great interest in many fields of civil and military applications because of all-weather and luminance free imaging capability. SAR image quality parameters such as spatial resolution, peak to sidelobe ratio (PSLR), and integrated sidelobe ratio (ISLR) can be normally estimated by modeling of impulse response function (IRF) which is obtained from various system design parameters such as altitude, operational frequency, PRF, etc. In modeling of IRF, however, background clutter environment surrounding the IRF is generally neglected. In this paper, analysis method for SAR mage quality is proposed in the real background clutter environment. First of all, SAR raw data of a point scatterer is generated based on various system parameters. Secondly, the generated raw data can be focused to ideal IRF by range Doppler algorithm (RDA). Finally, background clutter obtained from image of currently operating SAR system is applied to IRF. In addition, image quality is precisely analyzed by zooming and interpolation method for effective extraction of IRF, and then the effect of proposed methodology is presented with several simulation results under the assumption of estimation error of Doppler rate.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.10-17
• /
• 2023

Purpose: In this paper, a distance estimation technique for indoor location estimation using IR-UWB is proposed and researched. We propose an algorithm that can increase the SNR lowered due to clutter or noise in an indoor environment. Method: In order to clutter suppression and detect weak signals, we analyze the existing studies of background remover, correlation, and singular vector decomposition techniques and propose an algorithm. Result: The proposed algorithm, the average error was 0.57m up to 11.5m, and the error were 0.49m from 6m to 11.5m. the average error rate was reduced by about 1m compared to the previous study. Conclusion: It can be used as a technique for detecting weak signals in clutter and noise environments for distance or location estimation, and can also be used as a human life detection technique to reduce damage to people in a disaster situation by using UWB radar which has highly transparent.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.92-95
• /
• 1991

Constant false alarm rate(CFAR) processors are useful for detecting radar targets in background for which all parameters in the statistical distribution are not known and may be nonstationary. The well known "cell averging" (CA) CFAR processor is known to yield best performance in homogeneous case, but exhibits severe performance in the presence of an interfering target in the reference window or/and in the region of clutter edges. The "order statistics"(OS) CFAR processor is known to have a good performance above two nonhomogeneous cases. The modified OS-CFAR processor, known as "trimmed mean"(TM) CFAR processor performs somewhat better than the OS-CFAR processor by judiciously trimming the ordered samples. This paper proposes and analyzes the performance of a new CFAR processor called the "maximum trimmed mean"(MX-TM) CFAR processor combining the "greatest of"(GO) CFAR and TM-CFAR processors. The MAX operation is included to control false alarms at clutter edges. Our analyses show that the proposed CFAR processor has similar performance TM- and OS-CFAR processors in homogeneous case and in the precence of interfering targets, but can control the false rate in clutter edges. Simulation results are presented to demonstrate the qualitative effects of various CFAR processors in nonhomogeneous clutter environments.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.254-257
• /
• 2007

This paper presents an examination of the spatial integration method for extracting the RCS of a trihedral corner reflector from SAR images for SAR external calibration. An exact external radiometric calibration technique is required for extracting an exact calibration constant. Therefore, we examine the accuracy of the spatial integration method, which is commonly used for the SAR external radiometric calibration. At first, an SAR image for a trihedral corner reflector is simulated with a high-resolution SAR impulse response with a known theoretical RCS of the reflector, and a background clutter image for the high resolution SAR system is also generated. Then, a SAR image in a high resolution is generated for a trihedral comer reflector located on a background clutter by superposition of the two SAR images. The radar cross section of a trihedral corner reflector in the SAR image is retrieved by integrating the radar signals of the pixels adjacent to the reflector for various size of the integration area. By comparison of the measured RCS by the integration method and the theoretical RCS of the reflector, the effect of the size of the integration area on the extraction of the calibration constant is examined.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.615-618
• /
• 1999

In this paper, a object detection and tracking algorithm is presented which exhibits robust properties for image sequences with complex background. The proposed algorithm is composed of three parts: moving object detection, object tracking, and motion analysis. The moving object detection algorithm is implemented using a temporal median background method which is suitable for real-time applications. In the motion analysis, we propose a new technique for removing a temporal clutter, such as a swaying plant or a light reflection of a background object. In addition, we design a multiple vehicle tracking system based on Kalman filtering. Computer simulation of the proposed scheme shows its robustness for MPEG-7 test image sequences.