• 항공우주시스템공학회지
• /
• 제17권1호
• /
• pp.10-15
• /
• 2023

덕티드팬의 동력절환장치인 클러치의 마찰판 사양을 최적설계하고 그 결과를 분석하였다. 클러치는 기계적 잠금장치의 적용 여부에 따라 2가지 방식으로 구분하고 각자의 설계 조건 하에 최적화 되었다. 클러치를 최적 설계하기 위한 인자로 전달토크 용량, 마찰재 면압, 마찰면의 온도 및 드래그 토크 등을 계산하였고, 클러치 분리판의 부피와 드래그 토크의 최소화를 최적설계의 목적함수로 활용하였다. 기계적 잠금장치가 포함되지 않은 Type 1의 경우 덕티드팬의 피치각에 상관없이 클러치의 작동이 가능하지만, 기계적 잠금장치가 포함된 Type 2에 비해 마찰면의 외경이 약 2배정도 증가하였고, 부피는 약 5~7배, 드래그 토크는 약 7~12배 정도 증가하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제12권1호
• /
• pp.1-8
• /
• 2015

The stability of friction characteristics and thermal management for a dry type dual clutch transmission (DCT) are inferior to those of a wet clutch. Too high temperature resulting from frequent engagement of DCT speeds up degradation or serious wear of the pressure plate or burning of the clutch disk lining. Even though it is significantly important to estimate the temperature of a dry double clutch (DDC) in real-time, few meaningful study of the thermal model of DDC has been known yet. This study presented a thermal analytical model of lumped parameters for a DDC by analyzing its each component firstly. Then a series of experimental test was carried out on the test bench with a patented temperature telemetry system to validate the proposed thermal model. The thermal model, whose optimal parameter values were found by optimization algorithm, was also simulated on the experimental test conditions. The simulation results of DDC temperature show consistency with the experiment, which validates the proposed thermal model of DDC.

• Tribology and Lubricants
• /
• 제21권5호
• /
• pp.227-235
• /
• 2005

This paper presents a tribological study on the failure cases of automatic transmission components in a passenger car. The automatic transmission system is composed of torque converter, clutch, brake, planetary gear, and valve body controlling oil pressure of an automatic transmission fluid. The most largest influence components in an automatic transmission are a torque converter and clutch plate in which are influenced by a wear and torque converting energy loss. The failure case study of an automatic transmission indicates that the tribological design and maintenance technologies should be considered as a key design concept. This means that the failure and power energy loss come from the friction, wear and a oil leakage of an automatic transmission, which is related to the oil seal and O-ring seal failures.