• Korean Journal of Poultry Science
• /
• v.39 no.1
• /
• pp.9-15
• /
• 2012

The aim of this study was to investigate phenotypic characteristics, morphometric measurements, reproduction and production performances of Aseel chicken of Bangladesh. The dominant feather color of neck/hackles was red in both males (56.14%) and females (54.16%) while the sickle feather color was mostly black in both chickens (71.93% vs. 54.17%). The predominant saddle and breast feather colors were red (40.35%) and black (64.91%), respectively, in male whereas most frequent observed color was pale brown in female (58.33 and 50.0%, respectively). The predominant feather color of wing bow and wing bay was found black (68.42 and 80.70%, respectively) in male but only pale brown color was observed in females (62.5 and 54.17%, respectively) for these two characters. Different phenotypic measurements such as the average shank length and circumference were $12.79{\pm}0.13$ and $7.8{\pm}0.08$ cm, respectively, in male and $10.21{\pm}0.25$ and $5.81{\pm}0.21$ cm, respectively, in female. Keel length was $14.39{\pm}0.19$ cm in male and $10.79{\pm}0.23$ cm in female. The average adult live weight in male was measured $3749.12{\pm}83.44$ g while in female it was $2062.50{\pm}105.26$ g. The age of 1st lay was found to be 28.86 weeks. Total number of eggs laid per year ranged between 24~48, number of clutch/hen/year varied from 2 to 4 and number of eggs/clutch/hen was found to be 10~12. The average live weight of Aseel chicken at 1, 2, 3, 4, 6, 8, 10, 12, 16 and 17 weeks of age were recorded as $31.14{\pm}0.55$, $48.63{\pm}3.99$, $116.57{\pm}5.72$, $138.40{\pm}5.91$, $212.88{\pm}4.82$, $361.00{\pm}9.72$, $577.50{\pm}42.86$, $743.75{\pm}24.65$, $1086.00{\pm}26.02$, $1402.00{\pm}24.54$ and $1432.00{\pm}27.00$ g respectively. Finally, this phenotypic characterization as well as productive and reproductive performances of Aseel chicken will give the baseline information to researcher for further study and for planning any on-ward conservation and implement strategy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.394-410
• /
• 1993

This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.163-173
• /
• 2014

In this study, a modeling method is based on representing a road generation system with several rigid bodies, i.e, pad, shaft, torsional damper, oneway-clutch, gear system, and electricity generator. The simulation software is developed to evaluate the performance of a road generation system. It is used to determine parametric dimension for optimal design with the theoretically calculated results from the simulation software. The parametric dimensions are included as capacity, length, and angle of equipment. The transient responses at the conditions of low and high vehicle speed are compared with the calculated results as torque, power, out energy etc. Consequently, before manufacturing system, the analysis of simulation results shows that the proposed concept and system has efficiency and confidence.

• Ocean and Polar Research
• /
• v.31 no.3
• /
• pp.277-282
• /
• 2009

Saunders' gulls (Laurs saundersi) which are listed as globally vulnerable species on the IUCN Red List are distributed in East Asia and breed mainly in China and Korea. Their population is estimated to be between 7,100 to 9,600. Songdo reclaimed lands in the western coast of South Korea are the main breeding sites for these species. However, most of these breeding sites have been seriously disturbed in the last several years because of new urban development constructions. This study was conducted to provide baseline data on the breeding ecology of Saunders' gulls. Since 1998, the breeding population has rapidly increased in South Korea, with the number of nests rising from 85 nests in 2000 to 185 nests in 2005. Egg volume is more variable than breadth or length. Clutch size, hatching and breeding success were $2.9{\pm}0.81$ (n=182, mean$\pm$sd.), 48.07% (75 hatched egg/156 eggs) and 29.08% (155 fledglings/533 eggs), respectively. Factors affecting breeding failure were predation, rainfall, starvation and supernormal clutches. These results are provided along with other cited literature to argue for conservation of Saunders' gulls.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.3
• /
• pp.217-226
• /
• 2012

Reproductive ecology of the sharp toothed eel, Muraenesox cinereus was investigated based on the samples captured in southern Korean waters from January 2010 to December 2011. Gonadosomatic index began to increase in April, and reached maximum between July to August. After spawning it began to decrease from October. Reproductive season was estimated to April-September, with peak in July. Fecundity was proportional to the size of the female, with the clutch size varying from 56,000 eggs in the smallest female (anal length, 27.0cm) to 1,400,000 eggs in the largest (anal length, 49.5cm). Size at 50% sexual maturity ($AL_{50}$), determined from mature females, were 21.9cm. Annual reproductive cycles of this species could be divided into four successive stages; immature stage (October-February), maturing stage (March-May), mature stage (June-August) and spent stage (August-October).

• Korean Journal of Environment and Ecology
• /
• v.31 no.1
• /
• pp.24-29
• /
• 2017

This study was conducted to identify nesting habits and breeding biology of barn swallow in Gwangju, Korea, for the breeding season 2012 to 2014. All nests were attached to vertical walls and roofs of buildings and situated at mean height $2.9{\pm}0.3m$ above ground with nest diameter $18.2{\pm}3.2cm$, nest depth $9.8{\pm}3.1cm$, nest cup diameter $11.2{\pm}1.5cm$ and nest cup depth $3.27{\pm}0.80cm$. Nests were attached to cemented walls (44.9%), wooden materials (23.1%), bricks (21.8%) and lighting (6.4%). The average clutch size was 4.5 and ranged 2~5. Mean egg length was $18.23{\pm}0.73mm$, breadth $13.11{\pm}0.25mm$, volume $1.60{\pm}0.11cm^3$, shape index $1.39{\pm}0.05$ and weight $1.69{\pm}0.15g$. Hatching and fledgling success rate were 89.1% and 84.5%. Main causes for reproductive failures were unhatched eggs, predation, nest destruction and desertion. These results are expected to be widely used as data for habitat preservation and species management of barn swallows.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.61-70
• /
• 2008

This study was conducted to develop a mobile tower-yarder with tractor for agriculture and forestry that is the efficient yarder in steep terrains, thinning operation and small scale logging operation. It was designed and manufactured that the power source of tower-yarder is equiped three hydraulic pump connected to PTO of tractor, and three hydraulic pump is used to operate the four motor for drum, the cylinder for clutch of interlocker, the cylinder for tower expanding and the out-rigger cylinder. It was to adopt the running skyline system and the inter-lock function, and to equip the double capstan drum, the storage drum and the clutch for interlock in the development of tower-yarder. It was to develop the tower-yarder which the winch torque of double-capstan drum, the traction force of double-capstan drum, the number of rotation of double-capstan drum and the line speed is $191kg{\cdot}m$, 1,910 kgf, 220.5 rpm and 138.5 m/min, respectively. And it was known that the optimum flange diameter of the main and haulback storage drum is about 360 mm and about 460 mm in order to storage the main line length of 250m and the haulback line length of 450 m. The carriage was made to adopt the running skyline system and to equip the lock function in order to the convenience of chocking and the fall down preventing of tree. It was provided to develop the wire remote controller for the inter-lock function, the convenience of control and the efficiency of yarding. In development process, this tower-yarder was attached the 3-point linkage hitch equipment and the tire wheel for the traction and moving of tower-yarder. Also, it was equipped that the out-rigger and the guy line in order to raise the safety and efficiency of yarding of tower-yarder.

• Journal of Biosystems Engineering
• /
• v.7 no.1
• /
• pp.17-32
• /
• 1982

The binders introduced in Korea were originally designed to be used for Japonica-type varieties which have relatively long stem and are highly resistant to shattering. In order to use it for Tongil varieties which are short and easy to be shattered, mechanical modifications are necessary to reduce a grain loss incurred during binder operation. This study was intended to investigate analytically and experimentally the major sources of grain losses caused by three kinds of binders now introduced in Korea. Actual modification for each of three binders was done and experimentally compared to see if any improvement on grain loss was achieved. The results obtained in this study are summarized as follows; 1. It was required that the power transmission of binder should have a shifting mechanism so that velocities of pick-up and traveling units could be changed independently as desired according to the Japonica-type and Tongil varieties. In other words, the desired velocity of traveling unit should be obtained by shifting the transmission and the velocity of pick-up unit should be selected by reaping clutch according to the variety independent of the velocity of traveling unit as shown in Fig. 6. 2. To reduce grain loss it was desired that the moving parts of the pick-up unit should have the lowest possible velocities in harvesting Tongil varieties, unless the reduction of the speed be hindered the conveyance of the material. Based on the study, it was concluded that the velocities of pick-up unit be reduced by about 35% of those of the existing units. 3. It was found that the lug at the upper rotating section of pick-up case gave a severe impact on the ears of rice to increase grain loss. The optimum design of pick-up case to protect the ears from the protruding part of the lug was recommended by the result of analysis of the trajectory of the end-point of lug at the position. 4. It was proved analytically and experimentally that pick-up unit at the lower-rotating part was the other important source of grain loss in pick-up and divider assembly. In order to reduce a grain loss incurred by lugs at their lower-rotating section, it was suggested to improve it by (1) widening the space between right and left lower-rotating section, (2) shortening the length of lugs, (3) enlargement of the angle between the pick-up case and ground-level, and (4) attaching guard to right and left dividers so that the rotating lug could not give a high impact to the paddy hill. 5. Pick-up and divider assembly of the original binder of three models studied was modified according to the suggestions that were given by the preliminary study. Field test showed that the modified binders were able to reduce grain losses by about 0.4-0.7 percentage points compared to those without modification.

• Journal of Aquaculture
• /
• v.19 no.2
• /
• pp.109-118
• /
• 2006

The recent decrease in wild stocks of seahorse, Hippocampus coronatus, has prompted the production of the species in captivity. We here present data on the body color changes of the species according to culture conditions. This investigation examined relationship between adult body size and clutch and growth in 60 days after parturition and survival of juveniles with four fed enriched Artemia nauplii, copepod nauplii and copepod adult. Seahorse adults ($77.77{\pm}9.84mm$, n=12) collected from Kamak Bay and Yeoja Bay from August 2003 to November 2004 gave a parturition of $6\sim75$ juveniles (Mean, 39 juveniles/male/time) for 14 times. A day old seahorses were $14.48{\pm}1.38mm$ (n=15) in standard length (SL) with 14 dorsal fin rays, 12 pectoral fin rays and 4 anal fin rays. Sixty-day old seahorses were $24.65{\pm}0.83mm$ (n=4) in SL. Growth rate of seahorses was 0.18 mm/day at 24 in 60 days after parturition. When offered Artemia nauplii and copepod nauplii, 5 day old sea-horses preferred copepod nauplii to Aremia nauplii with a maximum predation rate of 31 copepod nauplii/sea-horse/h. However 30-day old seahorses preferred selected Artemia nauplii with a maximum predation rate of 14 Artemia nauplii/seahorse/h. Survival was highest (49%) when offered copepod nauplii together with enriched Artemia nauplii.

• Korean Journal of Environmental Biology
• /
• v.21 no.2
• /
• pp.149-157
• /
• 2003

This study focused on relationships between Pb and Cd concentrations and the difference of success reproductive progress in urban (Seoul) and industrial complex (Ansan) areas. Results of the Pb analysis for the feral pigeons from Seoul (egg contents:1.64 $\mu\textrm{g}$ wet $g^{-1}$, adults in bones: 29.5 $\mu\textrm{g}$ wet $g^{-1}$ and the Ansan industrial complex (egg contents: 1.13 $\mu\textrm{g}$ wet $g^{-1}$, adults in bones: 10.5 $\mu\textrm{g}$ wet g-1) showed that the Pb level of eggs and adults is significantly different between the two colonies (p<0.05). Cd concentrations in liver and kidneys of adult pigeons were also significantly different between Seoul(liver: 0.24 ${\mu}g$ wet $g^{-1}$, kidney: 1.05 $\mu\textrm{g}$ wet $g^{-1}$ and the Ansan (liver: 0.14 $\mu\textrm{g}$ wet $g^{-1}$, kidney: 0.43 $\mu\textrm{g}$ wet $g^{-1}$ colonies (P<0.05). Clutch size of Feral Pigeons living in Seoul was similar between the two colonies, 1.9$\pm$0.3 in Seoul and 2.0$\pm$0.0 in Ansan. The length, breadth, and thickness of eggs were not significantly different between the two colonies (p>0.05). Incubation period in Seoul (17.8 days) did not differ from the Ansan (17.4 days). No difference in growth rate (body weight, wing length, and tarsus length) was found between the two test groups (p>0.05). In Seoul, 65.2% were hatching, and 42.1% fledging. The Proportion of hatching and fledging in the Ansan was 60.7% and 45.0%, respectively. The significant differences between the two colonies for reproductive sucess were not found (p>0.05). With regard to the reproductive effects to the heavy metals, the Pb and Cd concentrations feund in the two colonies were not as high as those considered in results of toxic effects in other species.