• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.3
• /
• pp.481-493
• /
• 2022

This study investigated process conditions for 3D printing through manufacturing thermoplastic polyurethane (TPU) samples under different infill conditions. Samples were prepared using a fused deposition modeling 3D printer and TPU filament. 12 infill patterns were set (2D: grid, lines, zigzag; 3D: triangles, cubic, cubic subdivision, octet, quarter cubic; 3DF: concentric, cross 3D, cross, honeycomb), with 3 infill densities (20%, 50%, 80%). Morphology, actual time/weight and compressive properties were analyzed. In morphology: it was found that, as infill density increased, the increase rate of the number of units rose for 2D and fell for 3DF. Printing time varied with the number of nozzle movements. In the 3DF case, the number of nozzle movements increased rapidly with infill density. Sample weight increased similarly. However, where the increase rate of the number of units was low, sample weight was also low. In compressive properties: compressive stress increased with infill density and stress was high for the patterns with layers of the same shape.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.6
• /
• pp.1074-1087
• /
• 2022

This study reports an optimization of a 3D printed wrist brace (WB) for various tilting angles (0°, 45°, 90°) of the re-entrant (RE) pattern and thickness (2 mm, 4 mm) using thermoplastic polyurethane (TPU) filaments and thermoplastic elastomer (TPE) filaments. The actual printing time, weight, Poisson's ratio, and tensile property of the manufactured samples were analyzed. The results confirmed that the actual printing time and weight increased with increasing thickness, regardless of the filament type. All tilting angles of the WB showed a negative Poisson's ratio (NPR), the largest of which appeared at 90°. The results of the tensile property analysis showed that a 90° tilting angle also had the largest value of elongation and stress. From these results, we conclude that the most suitable wrist brace is one in which the actual printing time is low, the weight is minimized to a thickness of 2 mm, and the tilting angle of the RE pattern is 90° for good shock absorption. The choice of filaments may be decided upon according to the user's preference, since the TPU is stiff and the TPE is elastic.

• The International Journal of Costume Culture
• /
• v.5 no.1
• /
• pp.14-25
• /
• 2002

The purpose of this study is to define mass customization in the apparel industry and to discover, the apparel industry's potential to deliver customized apparel products. Different from product-centered mass Production, mass customization is focusing on customers' unique needs. The goal of mass customization is for customers to find exactly what they want at a reasonable price. Using new technologies such as 3-D body scanning and digital printing, mass customization can give customers customfit and personalized garments. Mass customization can satisfy a customer in terms of personalization, fit and design. Adoption of mass customization will open new opportunities for the apparel manufacturer of the future. Mass customization is a strategy that apparel manufacturers should consider for their goals.

• Fashion Information and Technology
• /
• v.13
• /
• pp.60-65
• /
• 2016

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.939-949
• /
• 2017

This study uses 3D printing technology to design and fabricate a fall impact protection pad with a spacer fabric structure. The design of the pads consists of hexagonal three-dimensional units connected in a honey-comb shape; in addition, the unit consists of a surface layer and a spacer layer. Protect pads were designed as either a hexagonal type or diamond type according to the surface layer structure; subsequently, a spacer filament was also designed as the most basic I-shape type. Designed pads were printed using four types of flexible filaments to select suitable material for a fall impact protection pad. Impact protection performance and bending stiffness were evaluated for the eight type of pad outputs. As a result of the impact protection performance evaluation, when the force of 6,500N was applied, the force passed through the pad was in the range of 1,370-2,132N. FlexSolid$^{(R)}$ and Skinflex$^{TM}$ showed good protection performance and cubicon flexible filament showed the lowest protection. NinjaFlex$^{(R)}$ was found to be the most flexible in the bending stiffness evaluation.

• Fashion & Textile Research Journal
• /
• v.23 no.4
• /
• pp.527-535
• /
• 2021

In this study, electroconductive textiles were developed by screen-printing technology using a complex solution of PEDOT:PSS/AgNW on a polylactic acid nanofiber web. A performance evaluation was then conducted to utilize this electroconductive textile as a signal transmission line. To obtain highly conductive electroconductive textiles, this study sought to determine the optimal mixing ratio of PEDOT:PSS/AgNW. Sheet resistance was measured to evaluate the electrical properties of electroconductive textiles, Finite element-scanning electron microscopy images were then used to examine surface properties, and Fourier transform-infrared analysis was performed to evaluate chemical properties. The signal waveform characteristics of the electroconductive textile were observed using a signal generator and an oscilloscope. Radio-frequency characteristics were then evaluated to confirm frequency range, and bending tests were conducted to evaluate durability. The signal transmission lines produced in this study had a sheet resistance value of 3.30 ?/sq, and signal transmission performance was evaluated to observe that the input value of the voltage was nearly identical to the output value. In addition, S21 analysis confirmed that it was available in the frequency domain up to 35 MHz. The performances of the transmission lines were maintained after 100, 200, 500, and 1,000 repeated bending tests, and sufficient durability was confirmed.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.221-229
• /
• 2023

This study aims to develop knee protectors that provide high safety and fitness, while incorporating a motion-adaptable 3D-printed pad. These protectors were evaluated by individuals who experience knee discomfort or pain. The results are as follows. First, the 3Dprinted pad design of a hexagonal mesh structure, which is modeled for excellent appearance and knee movement. Each unit of the mesh has a outer layer of 2mm thick, a spacer layer of 1 mm in diameter, and is connected by a 1.5 mm bridge. The bridge was extended up to 1.2 cm. Second, the knee brace was designed in three types - cylinder, strap, and combination by Universal design. Impact protection measurements of the three knee protectors demonstrated roughly 80% reduction in impact. Third, based on usability evaluation, cylinder type protectors have the highest ratings in most areas, primarily because of their ease of use. The strap type protector received positive reviews in terms of appearance and care, and the combination type provided stable knee protection. This study demonstrated the potential industrial application of 3D printing technology by designing and evaluating protective products for the human body. The results of this study are expected to aid knee protector manufacturers in developing practical products and promoting the development of protective equipment for other body parts or purposes.

• Journal of Fashion Business
• /
• v.26 no.2
• /
• pp.143-155
• /
• 2022

The purpose of this study was to develop protective clothing that could alleviate fall impacts. Fall impact protection pants for elderly women were designed, and motion adaptable hip pads and knee pads printed by 3D printing were integrated into the pants and evaluated. First, the design of the fall impact protection pants with variable motion was semi-loose fitting pants that could be worn and detached from the protective pad. A pad pocket was made in the lining inside the pants so that the protective pad could be fixed to the protective area. Second, in the evaluation of the appearance of the fall impact protection pants, the wearer group had a good score of 4.60 or higher for all questions on color, material, ease, and fit. In the evaluation of the insertion method of the protective pad, the flexibility of the pad, and the weight of the pad, the subjects' scores were 4.30~4.80. The fit of the fall impact protection pants was excellent in the texture and elasticity of the outside and inside of the pants. There was no discomfort due to the pad(4.60), and no difficulty in movement during wearing activities was reported. During squatting, it was evaluated as 4.80, indicating that the motion adaptable hip joint and knee pads were highly effective during operation.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• The Research Journal of the Costume Culture
• /
• v.29 no.1
• /
• pp.134-151
• /
• 2021

The aim of this research is to develop a clothing and textiles studio course for preservice home economics teachers applying principles of Project-Based Learning (PBL) and maker education to equip future teachers with the ability to nurture creativity among adolescents. The studio course was developed in the following stages: analysis, design, development, implementation, and evaluation. We concluded that the resulting course met the following objectives extracted from the 2015 revised curriculum of home economics subjects: to promote creative and environmentally-friendly fashion design and styling abilities, gain the ability to use makerspace tools, understand flat pattern making and sewing processes, and develop creative thinking, aesthetic sense, and communication skills. Furthermore, the educational effects of PBL and maker education were confirmed through student comments on the course. Students mentioned the practicality of the material in their actual lives along with their enhanced integration of the subject material, self-directedness, aesthetic sense, ability to learn through trial and error, collaboration and communication, and sharing. Based on results from the implementation and evaluation stages, a clothing and textiles studio course should include the following modules: introduction of terms and tools, submission and sharing of clothing reformation and upcycling techniques, introduction to hand sewing, pouch making, heat-transfer printing, 3D printing, mask making, hat making, vest making, and the final team project on fashion styling. It is important for instructors to provide detailed guidelines on selecting personas for styling, looking for available materials, and selecting materials online.