• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.224-224
• /
• 2016

Many researchers have been tried to improve the performance of the phosphorescent organic light-emitting diode(PHOLED) by controlling of the dopant profile in the emission layer. In this work, as shown in Fig. 1 insert, a typical red PHOLED device which has the structure of ITO/NPB(50nm)/CBP(30nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) is fabricated with a 5nm thick doping section in the emission layer. The doping section is formed by co-deposition of CBP and Ir(btp)2acac with a doping concentration of 8%, and it's location(x) is changed from HTL/EML interface to EML/HBL in 5nm steps. The current efficiency versus current density of the devices are shown in Fig. 1. By changing the location of doping section, as shown in Fig. 1 and 2, at x=5nm, the efficiency shows the maximum of 3.1 cd/A at 0.5 mA/cm2 and it is slightly decreased when the section is closed to HTL and slightly increased when the section is closed to HBL. If the doping section is closed to HTL(NPB) the excitons can be quenched easily to NPB's triplet state energy level(2.5eV) which is relatively lower than that of CBP(2.6eV). Because there is a hole accumulation at EML/HBL interface the efficiency can be increased slightly when the section is closed to HBL. Even the thickness of the doping section is only 5nm,. the maximum efficiency of 3.1 cd/A with x=5 is closed to that of the homogeneously doped device, 3.3 cd/A, because the diffusion length of the excitons is relatively long. As a result, we confirm that the current efficiency of the PHOLED can be improved by the doping profile optimization such as partially, not homogeneously, doped EML structure.

• 복식
• /
• 제54권4호
• /
• pp.145-156
• /
• 2004

This study is regarding closed and open forms, which have relatively high recognition among visual perception phenomena in costumes. In particular, this study reviewed closeness and openness of ethnic look, which is a representative open costume. Closed form can be summarized as simple and clear silhouette, conspicuous differentiation from the background, simple construction of the costume and colors with low brightness and clearness. It Is modern, functional, rational and modest. On the other hand, open form can be summarized as complicated and inconspicuous edge line, complicated inner shape and colors with high brightness, high clearness and vividness. It includes concepts of pleasure, entertainment, joy, eroticism, rebel and resistance. Modern costumes have been simplified for a long time and they have functional and closed characteristics in their shape, structure and form. On the other hand, modern open form costumes are usually found in sub-cultural styles such as punk, hippie, kitsch and vintage, and some ethnic looks. Following is a summary of the characteristics of open form shown in the ethnic look. 1. The shape, structure of costumes, hair accessories, lace, ruffle and ornaments are complicated and irregular. 2. The silhouette is inconspicuous because of ambiguity between backgrounds and ABC (Apparel-Body-Construct) or the use of see-through materials. 3. It makes complicated visual shapes because it does not have a single type but is composed of various clothing items together. 4. It gives complex feelings by matching various colors or more than two different fabrics. 5. It looks like the open type because of the complex patterns shown in the costumes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.734-739
• /
• 2003

Many types of smart materials and control laws are available to actively adjust the structure from various external disturbances. Usually, a certain type of control laws to activate a specific smart material is well established, but the effectiveness of the control scheme is limited by the choice of the smart materials and the responses of the structure. ER fluid is adequate to provide relatively large control force, on the other hand, the PZT patches are suitable to provide small but arbitrary control forces at any point along the structure. It was found that active vibration control mechanism using ER fluid failed to suppress the excitation off the resonant frequency with changed structural characteristics along the frequency response function of the closed loop of the control system. To compensate this additional peak of the closed loop system, PPF control using PZT as an actuator is added to construct a hybrid controller.

• 한국재료학회지
• /
• 제1권2호
• /
• pp.86-92
• /
• 1991

Morse potential을 변형한 2체항(2-body tem)과 Axilrod-Teller potential을 변형한 3체항(3-body tem)으로 구성된 포텐셜에너지 함수를 사용하여 $C_2-C_6$ cluster 동소체들의 에너지들의 에너지를 3체항 세기인자(3-body intensity factor)의 함수로 나타냄으로써 3체 인력의 기여도의 증가함에 따라 carbon cluster들의 구조는 open structure로부터 closed structure로, 또한 복잡한 구조로부터 단순한 구조, 즉 3차원적인 형태로부터 2차원 및 1차원적인 형태로 변해감을 알 수 있었다.

• 호남수학학술지
• /
• 제16권1호
• /
• pp.79-88
• /
• 1994

• 대한수학회지
• /
• 제6권2호
• /
• pp.81-83
• /
• 1969

• 한국전산구조공학회논문집
• /
• 제24권4호
• /
• pp.457-462
• /
• 2011

본 논문은 지진응답을 제어하기 위해 다층 건물에 설치된 마찰감쇠기의 간단한 설계절차를 제안하였다. 마찰감쇠기는 비선형성이 강하므로 마찰감쇠기가 설치된 건물의 제어효과를 파악하는 것은 어렵다. 마찰감쇠기의 제어력은 층간속도에 영향을 받으므로, 인접한 모드가 서로 연계된다. 따라서 응답은 공진일 때 안정상태응답으로 가정하여 유도하였다. 첫째로 지진하중에 대한 정해응답을 구하는 것은 불가능하므로 조화가진을 받을 때의 근사해를 유도하였다. 둘째, 다층 건물을 단자유도로 변환하기 위해서 모드해석이 수행되었다. 셋째, 근사해를 이용하여 등가감쇠비를 유도하였다. 그리고 등가감쇠비를 이용하여 응답감소계수를 제안하였다. 마지막으로, 마찰감쇠기의 마찰력을 응답감소계수에 의해 설계하고 설계된 감쇠기를 7개의 지진파를 통해 검증하였다. 비선형해석 결과가 제안된 절차의 유효성을 확인하였다.

• 한국전자파학회논문지
• /
• 제16권8호
• /
• pp.783-789
• /
• 2005

본 논문은 glass 기판 위에 RE IPD(Integrated Passive Device) 기술을 이용하여 dual band 방향성 커플러의 새로운 설계와 구현을 하였으며, 이러한 구조는 전력 증폭기의 출력부에 closed loop 전력 제 어용 GSM/GPRS cellular phones에 적용할 수 있다. 커플러는 방향성 향상을 위하여 보상 capacitor를 이용하였으며, 상호 밴드의 간섭을 최소화하기 위하여 새로운 방법의 필터링 구조(diplexer)를 갖는 커플러를 구현하였다.

• 한국지진공학회논문집
• /
• 제22권4호
• /
• pp.245-251
• /
• 2018

In this paper, we address some issues in existing seismic hazard closed-form equations and present a novel seismic hazard equation form to overcome these issues. The presented equation form is based on higher-order polynomials, which can well describe the seismic hazard information with relatively high non-linearity. The accuracy of the proposed form is illustrated not only in the seismic hazard data itself but also in estimating the annual probability of failure (APF) of the structural systems. For this purpose, the information on seismic hazard is used in representative areas of the United States (West : Los Angeles, Central : Memphis and Kansas, East : Charleston). Examples regarding the APF estimation are the analyses of existing platform structure and nuclear power plant problems. As a result of the numerical example analyses, it is confirmed that the higher-order-polynomial-based hazard form presented in this paper could predict the APF values of the two example structure systems as well as the given seismic hazard data relatively accurately compared with the existing closed-form hazard equations. Therefore, in the future, it is expected that we can derive a new improved APF function by combining the proposed hazard formula with the existing fragility equation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.59-61
• /
• 1995

This paper presents the cogging torque analysis of the permanent magnet type AC servo motor which have the closed slot structure. Generally, existence of the slot opening causes the cogging torque. But the cogging torque exists in this type motor(having closed slot structure) because the bridge part is saturated by the rotor flux. In this paper, the finite element analysis is used to calculate the cogging torque and the rated torque. As the size of the bridge part-the thickness and the width-changes, the cogging torque and the rated torque are obtained repeatedly like as upper procedures. Finally, the trends of the cogging torque and the rated torque versus the size of the bridge part are obtained from this analysis procedures. By this approach, the optimal geometry of the bridge part can be found which minimize the cogging torque satisfying the required value of the rated torque.