• 한국치위생학회지
• /
• 제2권2호
• /
• pp.145-158
• /
• 2002

This is a section study for research of main cause and coping ways caused by stresses during the clinical experiment. It was researched by 231 students of third grade have finished clinical experiment until September though questionnaire. The methods for this study used the a stress measuring instrument thai was used by Hoa-Yun Jun and coping ways of stresses devised by Bell. We computed the frequency and the mean value by the SPSS 10.0 statistical data and we got the following result that from the experiment with t-test and the ANOVA analysis. 1. The mean value of stresses indicated rather higher states in figures 2,855 and the figures that were classified by each areas, indicated highest figures are affected by circumstances, that is 3.065. 2. As higher as the degree of satisfactions in their major, students feel stress less so, the result was not quite different between each of them (p=0.007). 3. The copping ways of stresses indicated, similar differences by using of long-term copping ways and short-term copping ways to cope with stresses(p=0.000). 4. In case of the students who failed college entrance exams and prepared for the next chance for more than one year, indicated highest figures that is 2.57 in short-term ways to cope with stresses, so it showed slightly differences between them(p=0.014). 5. According to the satisfactions of clinical experiments, there were not any statistical differences in long-term coping ways but, as smaller as the satisfactions, in that evidence of the students use short-term copping ways, it showed slightly differences between them(p=0.041). 6. According to the degree of stresses, low-stress groups use short-term coping ways more than high-stress groups, so it showed slightly differences between them(p=0.001). 7. As far as the using of long-term coping ways, the figures of between the lower stress groups and the higher stress groups indicated 2.89 and 2.97 respectably so, the figures were not so closed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.72-80
• /
• 2018

본 연구는 기계주입 방식으로 간단히 재충전 할 수 있는 TPS 공법을 사용하여 실제 건설현장에 적용한 후 콘크리트 균열에 미치는 영향을 알아보고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, 초음파 속도의 경우 TPS 공법을 사용하였을 시 주사기 공법에 비해 평균 약 36 mm/sec로 초음파가 빠른 속도로 통과하는 것을 알 수 있었고, 주입깊이의 경우 주사기 공법에서는 부분 충전되는 것을 확인하였으나 TPS 공법의 경우 강한 주입 압력으로 모든 배합에서 보수재가 100% 충전되는 우수한 경향을 나타내었다. 또한, 압축강도의 경우는 TPS 공법 사용 시 평균 16.8 % 증가하는 것으로 나타나 구조적으로 우수한 것으로 나타났다. 이상을 종합하면 주사기 공법에 비해 TPS 공법을 사용하였을 시 균열부위에 주입재가 밀실하게 충전되어 강도 증진으로 인한 품질 향상 및 확인창 설치로 인한 균열보수제의 거동이 확인 가능하다. 또한, TPS 공법 시공구간 532 m에 대하여 약 5일의 공사 기간이 단축됨에 따라 시공성이 우수하여 콘크리트 구조물에 균열 보수공법으로 사용성이 확대될 것으로 기대된다.