• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.101-110
• /
• 2018

This paper introduces feedback linearization (FL) based adaptive sliding mode control (ASMC) effective against ground effects of the quadrotor UAV. The proposed control has the capability of estimation and effective rejection of those effects by adaptive mechanism, which resulting stable attitude and positioning of the quadrotor. As output variables of quadrotor, x-y-z position and yaw angle are chosen. Dynamic extension of the quadrotor dynamics is obtained for terms of roll and pitch control input to be appeared explicitly in x-y-z dynamics, and then linear feedback control including a ground effect is designed. A sliding mode control (SMC) is designed with a class of FL including higher derivative terms, sliding surfaces for which is designed as a class of integral type of resulting closed loop dynamics. The asymptotic stability of the overall system was assured, based on Lyapunov stability methods. It was evaluated through some simulation that attitude control capability is stable under excessive estimation error for unknown ground effect and initial attitude of roll, pitch, and yaw angle of $30^{\circ}$ in all. Effectiveness of the proposed method was shown for quadrotor system with ground effects.

• Journal of information and communication convergence engineering
• /
• 제22권2호
• /
• pp.145-152
• /
• 2024

Closed quotient (CQ) represents the time ratio for which the vocal folds remain in contact during voice production. Because analyzing CQ values serves as an important reference point in vocal training for professional singers, these values have been measured mechanically or electrically by either inverse filtering of airflows captured by a circumferentially vented mask or post-processing of electroglottography waveforms. In this study, we introduced a novel algorithm to predict the CQ values only from audio signals. This has eliminated the need for mechanical or electrical measurement techniques. Our algorithm is based on a gated recurrent unit (GRU)-type neural network. To enhance the efficiency, we pre-processed an audio signal using the pitch feature extraction algorithm. Then, GRU-type neural networks were employed to extract the features. This was followed by a dense layer for the final prediction. The Results section reports the mean square error between the predicted and real CQ. It shows the capability of the proposed algorithm to predict CQ values.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1037-1049
• /
• 2001

Considerable interest has evolved in the flow of non-Newtonian fluids in channels of noncircular cross section in compact heat exchanges. Analytical solution was developed for prediction of the flow rate and maximum velocity in steady laminar flow of any incompressible, time-independent non-Newtonian fluids in straight closed and open channels of arbitrary, but axially unchanging cross section. The geometric parameters and function of shear describing the behavior of the fluid model were evaluated for fluid flow among a bundle of rods arranged in triangular and square array. Numerical values of dimensionless maximum velocities, mean velocities, pressure-drop-flow parameters and friction factors were evaluated as a function of porosity and pitch-to-radius ratio.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.31-36
• /
• 1997

Thermal expansion of the ball screw in semi-closed loop type CNC Lathe directly affects the position precision along the travel axis. In this paper, the thermal displacement of the ball screw is estimated by using macro variables. The estimated displacements of the ball screw are managed by calculating the interval of pitch error rate in the NC. The thermal behaviour of the ball screw of the CNC Lathe, under the constant operating conditions, was measured to examine the effectiveness of this compensation method. The results showed that thermal displacement of the ball screw could be maintained its accuracy better than 6${\mu}{\textrm}{m}$ while applying this method.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 춘계학술발표대회 논문집 제23권 1호
• /
• pp.77-80
• /
• 2004

인간은 "습관적 피치 레벨" 즉 자연스럽게 말할 때 평균적으로 사용하는 피치를 갖는다. 하지만 음성에 잡음이 첨가 되면 이 피치가 불규칙하게 바뀌게 된다. 이점을 이용하여 음성의 잡음레벨을 측정할 수 있다. 본 논문에서는 입력음성의 에너지를 구하고 일정 에너지레벨 이상에서의 구간에 대해 NAMDF(Normalized Average Magnitude Difference Function)방법으로 피치를 구하고, 각 프레임을 피치단위로 분절한 뒤 인근 피치간의 유사도를 측정하여 입력음성데이터의 잡음레벨을 검출하는 방법을 제안하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 추계학술발표대회논문집 제23권 2호
• /
• pp.73-76
• /
• 2004

인간은 "습관적 피치 레벨" 즉 자연스럽게 말할 때 평균적으로 사용하는 피치를 갖는다. 하지만 음성에 잡음이 첨가되면 이 피치가 불규칙하게 바뀌게 된다. 이점을 이용하여 음성의 잡음레벨을 측정할 수 있다. 본 논문에서는 입력음성의 에너지를 구하고 일정 에너지레벨 이상에서의 구간에 대해 NAMDF(Normalized Average Magnitude Difference Function)방법으로 피치를 구하고, 각 프레임을 피치단위로 분절한 뒤 인근 피치간의 유사도를 측정하여 입력음성데이터의 잡음레벨을 검출하는 방법을 제안하였다.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.45-51
• /
• 1999

Thermal expansion of the ball screw can directly affect the accuracy of positioning along the travel axis in the semi-closed loop type CNC Lathe. In this paper, use of MACRO variables can make the thermal displacement of the ball screw estimated. Also, the estimated displacements of the ball screw are controlled by calculating the interval of pitch error rate in the Numerical Control(NC). Under the constant operating conditions, the thermal expansion of the ball screw was measured to confirm the effectiveness of the compensation method in the CNC Lathe. By using this method the results show that the thermal displacement of the ball screw could be reduced to 20% compared with ordinary method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.565-568
• /
• 1995

This paper presents the position control of a closed-loop cylinder system using ER(electro-rheological)valve actuators. Following the field-dependent pressure analysis of the ER valve actuators on the basis of Bingham model of ER fluids, a 3 d.o.f. close-loop sylinder system having the heave, roll and pitch motions is proposed. The governing equations of motion are derived using Lagrange's equation, and a control model is established by considering system uncertain parameters such as load conditions. A sliding mode controller which has inherent robustness to system uncertainties is adopted to achieve robust tracking control performance. Tracking control results for sinusoidal trajectory were presented in order to demonstrate the effectiveness of the proposed control system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.278-282
• /
• 1997

Thermal expension of the ball screw in semi-closed loop type CNC Lathe directly introduces positioning error along the travel axis. In this paper the thermal displacement of the ball screw is estimated by using macro variabie. The estimated dispacement of the ball screw are given to the NC in the form of pitch error compensation data into time interval. The thermal behaviour of the ball screw of the CNC Lasthe under the constant driving conditions was measured to examine the effectiveness of this compensation method. The results showed that thermal displacment of the ball screw were the positioning accuracy could be maintained to better then 6 .mu.m while using this compensation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.893-900
• /
• 1994

In this study, workspace analysis has been performed for a Clemens Coupling type parallel robotic wrist with four degrees of freedom such as three angular degrees of freedom and 1 plunge motion. Because of plunge motion, this mechanism has no singular point that the general roll-pitch-roll mechanisms have. Also, proposed mechanism performs larger load, faster motion, with less weight and has better structural characteristics such as higher stiffness and strength to weight ratio compared with serial type mechanisms. As a basic step for position control, the closed form solution of forward and inverse kinematics are proposed and workspace is analyzed and plotted by applying triangle tracer method for workspace boundary tracing.