• 한국통신학회논문지
• /
• 제30권12C호
• /
• pp.1181-1185
• /
• 2005

MIMO-OFDM 시스템은 차세대 무선 통신 시스템의 성능을 높일 수 있는 효과적인 기술로 고려되어 지고 있다. 이러한 이유로 본 논문에서는 고속 통신에 용이한 VBLAST가 적용된 OFDM 시스템을 고려하였다. OFDM 전송 방식은 고속의 전송률 및 페이딩 극복 특성이 우수한 반면에 높은 PAR 특성으로 인한 문제점을 가지고 있다. 이러한 문제점은 IFFT 수행시 동일 위상의 확률적인 가산으로 인해 시간 축에서 peak power가 발생되기 때문이다. 현재까지 이러한 문제점을 해결하기 위하여 다양한 PAR 감쇄 기법들이 개발되었고, 그 중 스크램블링 기법이 가장 대표적인 방식으로 사용되어진다. 기존적 스크램블링 방식은 단일 안테나 시스템에 적합하도록 설계되어 있어 다중안테나 시스템에 적용할 경우 매우 복잡한 처리과정을 야기한다. 본 논문에서는 스크램블링 방식 중 구현의 용의성을 고려한 방법인 SLM 방식을 이용하여 MIMO-OFDM 시스템에서의 효율적인 PAR 감쇄 기법을 제안한다. 제안된 기법은 사이드 정보를 매우 정확하게 검출해 낼 수 있어 전체적인 시스템의 성능에 향상을 가져온다.

• 한국통신학회논문지
• /
• 제37권6C호
• /
• pp.483-491
• /
• 2012

자동차 간 (Vehicle-to-Vehicle) 통신에서, 각각의 자동차들은 위치, 속도, 조향 등의 정보를 포함하는 비컨 메시지를 주변의 자동차들에게 주기적으로 방송함으로써, 이들로 하여금 자신의 주행 정보를 인지할 수 있도록 한다. 그런데, 단순한 비컨 메시지의 방송은 메시지 수신 확률을 감소시키고 지연 시간을 크게 증가시키는 원인이 된다. 따라서, 본 논문에서는 비컨주기 (Beacon Period), 반송파감지거리 (Carrier-Sensing Range), 그리고 IEEE 802.11 DCF 졍쟁구간크기 (Contention Window Size)가 자동차 간 통신의 성능에 미치는 영향을 수학적으로 분석하고자 한다. 우선, 측위 오차의 임계값으로부터 자동차 운전 속도에 반비례하는 비컨주기를 도출하고, 이를 기반으로 비컨 메시지로 인한 DSRC 채널의 최대 부하를 수학적으로 유도한다. 비컨 메시지의 부하가 특정 임계치 이하가 되도록 반송파감지거리를 결정하는 수학적 모형을 유도하고, 수율을 최대화하는 DCF 경쟁구간크기에 대한 닫힌 근사해를 제시한다.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.383-397
• /
• 2013

In this paper, the sensitivity of massive antenna arrays and digital beamforming to radio frequency (RF) chain in-phase quadrature-phase (I/Q) imbalance is studied and analyzed. The analysis shows that massive antenna arrays are increasingly sensitive to such RF chain imperfections, corrupting heavily the radiation pattern and beamforming capabilities. Motivated by this, novel RF-aware digital beamforming methods are then developed for automatically suppressing the unwanted effects of the RF I/Q imbalance without separate calibration loops in all individual receiver branches. More specifically, the paper covers closed-form analysis for signal processing properties as well as the associated radiation and beamforming properties of massive antenna arrays under both systematic and random RF I/Q imbalances. All analysis and derivations in this paper assume ideal signals to be circular. The well-known minimum variance distortionless response (MVDR) beamformer and a widely-linear (WL) extension of it, called WL-MVDR, are analyzed in detail from the RF imperfection perspective, in terms of interference attenuation and beamsteering. The optimum RF-aware WL-MVDR beamforming solution is formulated and shown to efficiently suppress the RF imperfections. Based on the obtained results, the developed solutions and in particular the RF-aware WL-MVDR method can provide efficient beamsteering and interference suppressing characteristics, despite of the imperfections in the RF circuits. This is seen critical especially in the massive antenna array context where the cost-efficiency of individual RF chains is emphasized.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.365-380
• /
• 2020

The focus of this paper is to develop an analytical approach based on an efficient shear deformation theory with stretching effect for bending stress analysis of cross-ply laminated composite plates subjected to transverse parabolic load and line load by using a new kinematic model, in which the axial displacements involve an undetermined integral component in order to reduce the number of unknowns and a sinusoidal function in terms of the thickness coordinate to include the effect of transverse shear deformation. The present theory contains only five unknowns and satisfies the zero shear stress conditions on the top and bottom surfaces of the plate without using any shear correction factors. The governing differential equations and its boundary conditions are derived by employing the static version of principle of virtual work. Closed-form solutions for simply supported cross-ply laminated plates are obtained applying Navier's solution technique, and the numerical case studies are compared with the theoretical results to verify the utility of the proposed model. Lastly, it can be seen that the present outlined theory is more accurate and useful than some higher-order shear deformation theories developed previously to study the static flexure of laminated composite plates.

• 대한원격탐사학회지
• /
• 제25권6호
• /
• pp.547-557
• /
• 2009

LIDAR (LIght Detection And Ranging) is an active remote sensing technology which provides 3D coordinates of the Earth's surface by performing range measurements from the sensor. Early small footprint LIDAR systems recorded multiple discrete returns from the back-scattered energy. Recent advances in LIDAR hardware now make it possible to record full digital waveforms of the returned energy. LIDAR waveform decomposition involves separating the return waveform into a mixture of components which are then used to characterize the original data. The most common statistical mixture model used for this process is the Gaussian mixture. Waveform decomposition plays an important role in LIDAR waveform processing, since the resulting components are expected to represent reflection surfaces within waveform footprints. Hence the decomposition results ultimately affect the interpretation of LIDAR waveform data. Computational requirements in the waveform decomposition process result from two factors; (1) estimation of the number of components in a mixture and the resulting parameter estimates, which are inter-related and cannot be solved separately, and (2) parameter optimization does not have a closed form solution, and thus needs to be solved iteratively. The current state-of-the-art airborne LIDAR system acquires more than 50,000 waveforms per second, so decomposing the enormous number of waveforms is challenging using traditional single processor architecture. To tackle this issue, four parallel LIDAR waveform decomposition algorithms with different work load balancing schemes - (1) no weighting, (2) a decomposition results-based linear weighting, (3) a decomposition results-based squared weighting, and (4) a decomposition time-based linear weighting - were developed and tested with varying number of processors (8-256). The results were compared in terms of efficiency. Overall, the decomposition time-based linear weighting work load balancing approach yielded the best performance among four approaches.

• 자원ㆍ환경경제연구
• /
• 제27권4호
• /
• pp.613-637
• /
• 2018

분산전원으로서의 장점을 지닌 연료전지는 높은 투자비용과 전력가격의 불확실성에 영향을 받는다. 본 논문에서는 연료전지 투자의 비가역성과 전력가격의 불확실성을 고려한 실물 옵션 모형을 제시하도록 한다. 대부분의 실물옵션 모형은 분석의 편의상 기하학적 브라운 과정을 가정하지만, 본 연구에서는 평균회귀적인 전력가격의 특성을 반영한 경제성 평가모형을 개발하되 투자옵션 가치의 닫힌 해 또한 제시하도록 한다. 20MW급 연료전지 발전을 위한 데이터와 국내 RPS 상황을 고려한 실증분석 결과, 가격 불확실성을 고려하지 않은 경우 연료전지 발전의 투자 경제성은 확보되지만, 가격 불확실성이 존재할 경우 경제성이 저감되는 것으로 나타났다. 이는 연료전지 발전시설의 도입 및 활성화를 위해서 수입과 비용을 포함하는 종합적인 수익구조 개선 외에도 정책적 지원이 추가적으로 필요함을 시사한다.

• 한국정보기술학회논문지
• /
• 제17권10호
• /
• pp.49-55
• /
• 2019

본 논문은 다중 사용자 다중 입력 단일 출력 (MISO) 간섭 채널에서 복수의 도청자가 존재하는 경우에, 보안 채널 수율을 향상시키기 위한 간단한 프리코딩 벡터 설계 기법을 제안한다. 제안하는 기법에서는 보안 채널 수율을 최적화하는 문제에 대해 다루었으며, 수학식으로 주어지는 분석해를 구하는 것을 목표로 하였다. 이를 위해서 신호대 누수 잡음비 (SLNR) 기반으로 프리코딩 벡터를 설계하는 방법을 제시한다. 구체적으로는, 도청자가 정보 신호를 전혀 검출할 수 없도록 도청 채널 수율을 완전히 제거하면서, 송신단-수신단 링크 간의 채널 수율을 최대화시키도록 프리코딩 벡터를 설계한다. 성능 검증을 위하여 모의실험을 수행하였으며, 송신 안테나 개수, 송신단-수신단 링크 개수, 도청자 수 간에 특별한 조건식을 만족하지 않는 환경에서는, 제안하는 기법이 모든 신호대 잡음비 범위에서 기존 기법보다 더 우수한 보안 채널 수율을 나타낸다는 것을 제시한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.755-767
• /
• 2020

A significant development has been made on a new fatigue damage model applicable to Gaussian wide band stress response spectra using numerical approximation methods such as data processing, time simulation, and regression analysis. So far, most of the alternative approximate models provide slightly underestimated or overestimated damage results compared with the rain-flow counting distribution. A more reliable approximate model that can minimize the damage differences between exact and approximate solutions is required for the practical design of ships and offshore structures. The present paper provides a detailed description of the development process of a new fatigue damage model. Based on the principle of the Gaussian wide band model, this study aims to develop the best approximate fatigue damage model. To obtain highly accurate damage distributions, this study deals with some prominent research findings, i.e., the moment of rain-flow range distribution MRR(n), the special bandwidth parameter μk, the empirical closed form model consisting of four probability density functions, and the correction factor QC. Sequential prerequisite data processes, such as creation of various stress spectra, extraction of stress time history, and the rain-flow counting stress process, are conducted so that these research findings provide much better results. Through comparison studies, the proposed model shows more reliable and accurate damage distributions, very close to those of the rain-flow counting solution. Several significant achievements and findings obtained from this study are suggested. Further work is needed to apply the new developed model to crack growth prediction under a random stress process in view of the engineering critical assessment of offshore structures. The present developed formulation and procedure also need to be extended to non-Gaussian wide band processes.

• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.697-711
• /
• 2021

In this work, a simple quasi 3-D parabolic shear deformation theory is developed to examine the bending response of antisymmetric cross-ply laminated composite plates under different types of mechanical loading. The main feature of this theory is that, in addition to including the transverse shear deformation and thickness stretching effects, it has only five-unknown variables in the displacement field modeling like Mindlin's theory (FSDT), yet satisfies the zero shear stress conditions on the top and bottom surfaces of the plate without requiring a shear correction factor. The static version of principle of virtual work was employed to derive the governing equations, while the bending problem for simply supported antisymmetric cross-ply laminated plates was solved by a Navier-type closed-form solution procedure. The adequacy of the proposed model is handled by considering the impact of side-to-thickness ratio on bending response of plate through several illustrative examples. Comparison of the obtained numerical results with the other shear deformation theories leads to the conclusion that the present model is more accurate and efficient in predicting the displacements and stresses of laminated composite plates.

• Geomechanics and Engineering
• /
• 제31권1호
• /
• pp.99-112
• /
• 2022

The present study examines the natural frequencies (NFs) of perfect/imperfect functionally graded sandwich beams (P/IP-FGSBs), which are composed of a porous core constructed of functionally graded materials (FGMs) and a homogenous isotropic metal and ceramic face sheets resting on elastic foundations. To accomplish this, the material properties of the FGSBs are assumed to vary continuously along the thickness direction as a function of the volume fraction of constituents expressed by the modified rule of the mixture, which includes porosity volume fraction represented using four distinct types of porosity distribution models. Additionally, to characterize the reaction of the two-parameter elastic foundation to the Perfect/Imperfect (P/IP) FGSBs, the medium is assumed to be linear, homogeneous, and isotropic, and it is described using the Winkler-Pasternak model. Furthermore, the kinematic relationship of the P/IP-FGSBs resting on the Winkler-Pasternak elastic foundations (WPEFs) is described using trigonometric shear deformation theory (TrSDT), and the equations of motion are constructed using Hamilton's principle. A closed-form solution is developed for the free vibration analysis of P/IP-FGSBs resting on the WPEFs under four distinct boundary conditions (BCs). To validate the new formulation, extensive comparisons with existing data are made. A detailed investigation is carried out for the effects of the foundation coefficients, mode numbers (MNs), porosity volume fraction, power-law index, span to depth ratio, porosity distribution patterns (PDPs), skin core skin thickness ratios (SCSTR), and BCs on the values of the NFs of the P/IP-FGSBs.