• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.19-23
• /
• 2002

This paper presents a micro fluxgate magnetic sensor in printed circuit board (PCB). In order to observe the effect of the closed magnetic path, the magnetic cores of rectangular-ring and two bars were each fabricated. Each fluxgate sensor consists of five PCB stack layers including one layer magnetic core and four layers of excitation and pick-up coils. The center layer as a magnetic core is made of a Co-based amorphous magnetic ribbon with extremely high DC permeability of ~100,000. Four outer layers as an excitation and pick-up coils have a planar solenoid and are made of copper foil. In case of the fluxgate sensor having the rectangular-ring shaped core, excellent linear response over the range of -100 $\mu$T to ＋ 100 $\mu$T is obtained with 540 V/Tsensitivity at excitation square wave of 3 $V_{p-p}$ and 360 KHz. The chip size of the fabricated sensing element is $7.3 \times 5.7\textrm{mm}^2$. The very low power consumption of ~8 mW was measured. This magnetic sensor is very useful for various applications such as: portable navigation systems, telematics, VR game and so on.n.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.827-837
• /
• 2013

In this paper, we present wideband common-mode (CM) noise suppression using a vertical stepped impedance electromagnetic bandgap (VSI-EBG) structure for high-speed differential signals in multilayer printed circuit boards. This technique is an original design that enables us to apply the VSI-EBG structure to differential signals without sacrificing the differential characteristics. In addition, the analytical dispersion equations for the bandgap prediction of the CM propagation in the VSIEBG structure are extracted, and the closed-form expressions for the bandgap cutoff frequencies are derived. Based on the dispersion equations, the effects of the impedance ratio, the EBG patch length, and via inductances on the bandgap of the VSI-EBG structure for differential signals are thoroughly examined. The proposed dispersion equations are verified through agreement with the full-wave simulation results. It is experimentally demonstrated that the proposed VSI-EBG structure for differential signaling suppresses the CM noise in the wideband frequency range without degrading the differential characteristics.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.79-84
• /
• 1999

The existing EMTP(Electromagnetic Transients Program) is writted by FORTRAN-77, has a closed architecture and uses a large number of code lines to satisfy requirements ranging from low level data manipulation to the actual solution mathematics which eventually become diluted and almost impossible to visualize. Thus has a difficulty in the development and maintenenace of its program module. This paper proposes a new design idea suitable (or a re-development of EMTP using the MATLAB and VISUAL-C++, which presents the development of the new EMTP package is operated in the window environment. The package has the GUI(Graphic User Interface) ability, and the MATLAB computation engine for an analysis of a transient state in an electric circuit.

• Structural Engineering and Mechanics
• /
• v.73 no.6
• /
• pp.667-684
• /
• 2020

In this article, the static responses of layered magneto-electro-thermo-elastic (METE) plates in thermal environment have been investigated through FE methods. By using Reddy's third order shear deformation theory (TSDT) in association with the Hamilton's principle, the direct and derived quantities of the coupled system have been obtained. The coupled governing equations of METE plates have been derived through condensation technique. Three layered METE plates composed of piezoelectric and piezomagnetic phases are considered for evaluation. For investigating the correctness and accuracy, the results in this article are validated with previous researches. In addition, a special attention has been paid to evaluate the influence of different electro-magnetic boundary conditions and pyrocoupling on the coupled response of METE plates. Finally, the influence of stacking sequences, magnitude of temperature load and aspect ratio on the coupled static response of METE plates are investigated in detail.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.157-159
• /
• 2016

최근 학교폭력 및 묻지마 범죄가 꾸준히 증가추세에 있다. 2011년 12월 학교폭력에 의한 대구중학생 자살사건, 2010년 2월 김길태 사건과 6월 김수철 사건, 2016년 5월 강남역 노래방 살인사건과 6월 섬마을 여교사 사건 등 사회적 약자인 소년, 여성 대상범죄 및 묻지마 범죄가 사회문제로 대두되고 있다. 이에 따라 범죄예방 도구이자 전략으로써 CPTED가 하나의 대안으로 부각되고 있다. 국토교통부는 건축물, 건축설비 및 대지에 관한 범죄예방 기준인 '범죄예방 건축기준 고시'를 2015년부터 시행하고 있는데 적용대상 건물 등은 이 기준에 따라 설계하고 건축해야 한다. 현대 위험사회에서 강력범죄 및 경범죄의 사전예방을 위해서는 사회 안전시스템 구축이 요구되며 그 대안으로 환경설계를 통해 범행기회를 심리적, 물리적으로 차단하는 정책을 모색함으로써 환경범죄학 입장에서 범죄예방에 접근할 필요가 있다.

• Smart Structures and Systems
• /
• v.16 no.5
• /
• pp.781-806
• /
• 2015

A unified formulation of finite layer methods (FLMs), based on the Reissner mixed variational theorem (RMVT), is developed for the three-dimensional (3D) coupled electro-elastic analysis of simply-supported, functionally graded piezoelectric material (FGPM) plates with open- and closed-circuit surface conditions and under electro-mechanical loads. In this formulation, the material properties of the plate are assumed to obey an exponent-law varying exponentially through the thickness coordinate, and the plate is divided into a number of finite rectangular layers, in which the trigonometric functions and Lagrange polynomials are used to interpolate the in- and out-of-plane variations of the primary field variables of each individual layer, respectively, such as the elastic displacement, transverse shear and normal stress, electric potential, and normal electric displacement components. The relevant orders used for expanding these variables in the thickness coordinate can be freely chosen as the linear, quadratic and cubic orders. Four different mechanical/electrical loading conditions applied on the top and bottom surfaces of the plate are considered, and the corresponding coupled electro-elastic analysis of the loaded FGPM plates is undertaken. The accuracy and convergence rate of the RMVT-based FLMs are assessed by comparing their solutions with the exact 3D piezoelectricity ones available in the literature.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.164-173
• /
• 2006

In the electro-hydraulic injector for the common rail Diesel fuel injection system, the injection nozzle is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the piezo actuator was considered as a prime movers in high pressure Diesel injector. Namely a piezo-driven Diesel injector, as a new method driven by piezoelectric energy, has been applied with a purpose to develop the analysis model of the piezo actuator to predict the dynamics characteristics of the hydraulic component(injector) by using the AMESim code. Aimed at simulating the hydraulic behavior of the piezo-driven injector, the circuit model has been developed and verified by comparison with the experimental results. As this research results, we found that the input voltage exerted on piezo stack is the dominant factor which affects on the initial needle behavior of piezo-driven injector than the hydraulic force generated by the constant injection pressure. Also we know the piezo-driven injector has more degrees of freedom in controlling the injection rate with the high pressure than a solenoid-driven injector.

• Annals of Clinical Neurophysiology
• /
• v.2 no.2
• /
• pp.114-118
• /
• 2000

Purpose : The pathophysiology of essential tremor(ET) remains unknown. PET studies of ET showed some conflicting data. One study reported significant glucose hypermetabolism of the medulla and thalami, but other studies reported abnormal bilateral overactivity of cerebellar and red nuclear connections. The previous experimental studies suggested that each PET finding reflects a part of neural circuit which is responsible for ET. So it can be imagined that olivocerebellar oscillation may be transmitted by the way of cerebellar projections to the thalamus in ET. It has been reported that the cerebellar dentate nucleus neurons are involved in the generation and/or guidance of movement based on visual cues. The purpose of this study is to clarify the role of dentato-thalamic tract in ET. Methods : Tremor amplitudes were recorded as each patient perform two kinds of task, one involving sensory-guided movement and the other involving memory-guided movement. Each patient was asked to move his/her index finger following a smoothly moving target. He/She also was asked to perform the same movements with his/her eyes closed ET. Results : The results showed that average amplitudes of tremor were significantly higer during visually guided task than during memory guided task in ET patients. Conclusions : Our results led us to conclude that dentato-thalamic tract might be related to the control of tremor in ET.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.688-698
• /
• 2016

In this paper, we investigate the achievable sum rate and energy efficiency of downlink massive multiple-input multiple-output antenna systems with zero-forcing precoding, by taking into account the randomness of user locations. Specifically, we propose two types of non-uniform user distributions, namely, center-intensive user distribution and edge-intensive user distribution. Based on these user distributions, we derive novel tight lower and upper bounds on the average sum rate. In addition, the impact of user distributions on the optimal number of users maximizing the sum rate is characterized. Moreover, by adopting a realistic power consumption model which accounts for the transmit power, circuit power and signal processing power, the energy efficiency of the system is studied. In particular, closed-form solutions for the key system parameters, such as the number of antennas and the optimal transmit signal-to-noise ratio maximizing the energy efficiency, are obtained. The findings of the paper suggest that user distribution has a significant impact on the system performance: for instance, the highest average sum rate is achieved with the center-intensive user distribution, while the lowest average sum rate is obtained with the edge-intensive user distribution. Also, more users can be served with the center-intensive user distribution.

• Ocean and Polar Research
• /
• v.22 no.2
• /
• pp.57-67
• /
• 2000

Time-selective self-triggering water sampler, AUTTLE developed by Jin et al. (1999) has been improved in order to prevent pre-deposition of suspended sediments (SS) before sampling. By using two solenoids, the improved sampler is able to be moored or deployed with inclination. Its position is changed to horizontal position by activating the first solenoid, and then the endcaps of the sampling bottle are closed by the second solenoid that is driven three times to minimize possible failure of sampling. An external control unit for setting sampling time has been also constructed. Additionally, the electric circuit housing of the sampler has been modified to be detached from the sampling bottle when operating manually. Its performance has been confirmed through flume tests and a field experiment. It will serve as a valuable tool in the various fields of oceanography and environmental engineering, especially where seawater sampling synchronized at several sites and/or the information in storm period is important.