• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.255-258
• /
• 1996

A new low conduction loss, low cost zero-voltage-transition power factor correction circuit(PFC) is presented. Conventional PFC which consists of a bridge diode and a boost converter(one switch) always has three semiconductor conduction drops. Two switch type PFCs reduces conduction loss by reducing one conduction drop but the cost is increased because of increased number of active switches. The proposed PFC reduces conduction loss with one switch, which allows low cost. Conduction loss improvement is a little bit less than that of two switch type, but very close up. Operation and features are comparatively illustrated and verified by simulation and experimental results of 1 kW laboratory prototype.

• 아동학회지
• /
• 제20권3호
• /
• pp.123-137
• /
• 1999

This study investigated the influence of audience type (mother or close friend) age, and gender on children's goals and strategies for emotional regulation in angry and in sad situations. Hypothetical vignette methodology was used with 314 children in grades 5 and 7. In angry situations, all boys and all 5th grade children regulated anger more with instrumental motives while 7th grade girls showed more prosocial motives. Children showed more prosocial and rule oriented motives with peers and relational motives with mothers. In angry situations, children used aggression regulation strategies more toward peers and activity regulation strategies more toward mothers. Children's age and sex explained sadness regulation motives better than audience type with peers, but children used more activity regulation strategies with mothers in sad situations. When sad, fifth graders used more verbal and facial expression strategies than 7th graders while boys used more activity regulation strategies than girls.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.91-97
• /
• 2004

The door closer is a typical system which consists of spring and damper. The door closer is a device to close the door more slowly. The virtual prototypes of cylinder-type door closer are developed. The simulations of virtual prototype are performed to obtain the load history of the guide pin. The structural strength assessment of the guide pin is performed to verify a design safety. The fatigue life and damage of the guide pin are predicted using a FEMFAT 4.3h based on the finite element analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1613-1616
• /
• 2005

In this paper, we developed an algorithm of generating cam contour curve for hinge mechanism of folder-type mobile phone. The main feature of this hinge mechanism is that we can operate uniform torque to open or close the mobile phone. We divided the opening or closing intervals of the cam into finite sub-intervals, and then we determined the cam contour curve of each sub-interval as a parabolic curve. Finally, these finite parabolic curves form the total cam contour. We can design single cam, which composed moving cam with contour curve and fixed cam that plays only roller, and twin cam with contour curve that is made up the pair of two cams symmetrically.

• Journal of Chest Surgery
• /
• 제24권6호
• /
• pp.595-604
• /
• 1991

Pleural mesothelioma is usually divided into two forms of localized and diffuse type. Localized pleural fibrous mesothelioma is uncommon mesodermal neoplasm, which may occurs in both sexes and at the age of 50 years. This type of mesothelioma is usually asymptomatic and detected on routine chest X-ray and made fibrous tissue and shows of collagen fibers microscopically. Most localized fibrous mesothelioma arises from the visceral pleura and is well encapsulated and pedunculated mass. CT findings included well delineated, often lobulated, non-calcified soft tissue masses in close relation to a pleural space, associated pleural thickening, and absence of chest wall invasion and a peripheral or fissure location. Three cases of localized pleural fibrous mesothelioma diagnosed by resectional surgery were reported with the review of literature.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1133-1136
• /
• 2004

The structures of airplane consist of sheet metal part, heavy machined part, and so on, which generate enormous amounts of cutting chip when these parts are machined. The cutting chip detoriorates the part quality and production efficiency. Therefore, cutting chip collecting apparatus is necessary for better quality and efficiency. In this study, blowing type cutting chip collecting apparatus was newly proposed and the concept design of the apparatus was examined through numerical analysis. Computations using the mass-averaged implicit 2D Navier-Stokes equations are applied to predict the nozzle flow field. The standard k-e turbulent model are employed to close the governing equations. Consequently, this study shows that the suggested blowing type cutting chip collecting apparatus can be alternative to existing expensive chip collecting apparatus.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.52-59
• /
• 2000

Experimental studies were performed to improve the THC emission characteristics by optimizing the flow in the exhaust manifold and CCC in a SI engine. For this purpose the flow characteristics in the exhaust manifold and CCC were measured by using LDV technique under various engine conditions, Referring to these data a new type exhaust manifold was designed to improve the cold-start emission characteristics and the response characteristics of {{{{ OMICRON _2}}}} sensor by optimizing the flow pattern and reducing the thermal inertia of the exhaust manifold system. It was found through the vehicle emission tests that the emission characteristics of THC of the new type exhaust manifold was improved by 12% through the optimizing the flow pattern in the exhaust manifold.

• 대한인간공학회지
• /
• 제18권3호
• /
• pp.13-26
• /
• 1999

126 male and 95 female Korean college students were examined for Scoliosis by using Moire type body observation apparatus. Scoliotic hump measuring instrument, and spinal cord side curvature condition measuring instrument. The prevalence rate of Scoliosis along with identifying its possible causal factors and characteristics were investigated. The results revealed that 5.56% of male and 8.42% of female students(male to female ratio 1:1.47) were suspected as having Scoliosis. There was a significant correlation between the students who have symptoms of Scoliosis and their physiological measurements(e.g., lower breathing capacity of the lungs). There were also close relationships between the suspected cases and their habits(e.g., poor sitting and sleeping posture). It is concluded that the Scoliosis in Korean college students should not be ignored.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.253-257
• /
• 2009

Along with emergence of recent issues such as 'minimization of energy consumption' and 'natural environment and human health' amid the flow of requirements for nature-friendly architecture, attempts for boundary, which has a variety of possibilities as the intermediate territory between interior and exterior space of the architecture, have been pursued actively. On the ground of close relationships between urban area and architecture in a modern society, the boundary between interior and exterior is being exhibited in a wide variety of way of expressions, not as a single plane any longer. In line with this, researcher analyzed interior and exterior boundary according to its type targeting modern housing complex in Europe, and also investigated characteristics thereof. And, having provided the results as basic materials in order to seek amenity of local apartment houses and diversification of housing plan as well, the researcher intends to be of a help to bring physical changes in both building and exterior design, and also to give a new meaning in an environment-friendly aspect.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.51-57
• /
• 2016

This paper presents the voltage characteristics of the various faults after lightning surge hits the overhead grounding wire close to the transformer's secondary side. Based on the modeled distribution system, the cases of the various faults occurred by lightning surge are simulated using EMTP/ATPDraw and maximum overvoltage and RMS voltage according to the distances from the transformer are investigated. As a result, it is seen that the voltage characteristics of faults caused by lightning surge is different depending on the fault type and the voltage characteristics can be used to detect the fault type caused by lightning surge.