• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.11
• /
• pp.919-925
• /
• 2016

In this study, multibody dynamic and mechanical analyses were conducted for the structure of roller chain bucket elevator system. The fatigue life of the roller chain elevator system was determined under static and fatigue loadings. Results of multibody dynamic analysis suggested that the maximum contact force occurred at the drive sprocket engagement point with the roller chain due to maximum tension. Fatigue analysis results suggest that the high load roller chain system is durable and safe because its life time is more than 700,000 cycles, close to its designed value (1,000,000 cycle). However, the contact portion of plate and pin needed a safety factor. The dynamic analysis of the heavy load roller chain was conducted with a multibody dynamic analysis program. The results obtained in this study can be utilized for dynamic analysis of roller chain systems in all industries.

• Solar Energy
• /
• v.13 no.1
• /
• pp.39-48
• /
• 1993

This empirical paper addresses the phenomena of the contact melting of PCM in horizontal capsules of circular and rectangular cross sections with various aspect ratio. The melting-rate tends to increase as the Stefan number increases. The case of rectangular tube displays larger melting-rate than that of circular tube, and the melting-rate increases as the aspect ratio decreasws for rectangular tubes. In case of circular tube, the effect of natural convection on the melting-rate is 6.1%, 8.6% and 11.2% according to Stefan number 0.0772, 0.1287 and 0.1802 respectively.

• The Korean Journal of Zoology
• /
• v.37 no.4
• /
• pp.504-513
• /
• 1994

The present study was carried out 1) to show the ontogenic development of CA-and GnRH-containing nerve fobres in the median eminence, 2) to simultaneously demonstrate the synaptic contact between these two nenre fibres in the rat median eminence at the ultrastructural level using light and electron microscopic doublelabel immunostainlngs. GnRH-and CA-nenre terminals were detectable in the median eminence at embryonic day 19.5. The CA-newe terminals were obsenred in the entire legion of the extern31 lavers, while GnRH-newe terminals only in the lateral portion. At the 14th postnatal daw, both %ropes of nerve terminals showed a very similar distribution to those of adult one. In the median eminence of adult rats, a substantial overlap existed in the distribution of GnRH fibres with CA-containing nerve fibres. This overlap was most intense throughout the external palisade zone. Furthermore, an electron microscopic double label immunostaining showed that there was a close apposition of CA- and GnRH-nenre fobres. These axo-axonic contacts occurred frequently in the internal and palisade zones, i.e. at the level of the fobre preterminals. These morphological results suggest that the CA-mediated GnRH secretion may occur via sxo-axonic interaction in the median eminence.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.209-219
• /
• 2023

This paper presents numerical investigations into the particle crushing effect on the shear properties of gravel under direct shear condition. A novel particle crushing model was developed based on the octahedral shear stress criterion and fragment replacement method. A series of direct shear tests were carried out on unbreakable particles and breakable particles with different strengths. The evolutions of the particle crushing, shear strength, volumetric strain behavior, and contact force fabric during shearing were analyzed. It was observed that the number of crushed particles increased with the increase of the shear displacement and axial pressure and decreased with the particle strength increasing. Moreover, the shear strength and volume dilatancy were obviously decreased with particle crushing. The shear displacement of particles starting to crush was close to that corresponding to the peak shear stress got. Besides, the shear-hardening behavior was obviously affected by the number of crushed particles. A microanalysis showed that due to particle crushing, the contact forces and anisotropy decreased. The mechanism of the particle crushing effect on the shear strength was further clarified in terms of the particle friction and interlock.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3715-3721
• /
• 2013

In this study, the behavior of cells on the modified surface, and the correlation between the modified substrates and the response of cells is described. A close-packed layer of nano-sized silica beads was prepared on a coverslip, and the adhesion, proliferation, and migration of BALB/3T3 fibroblast cells on the silica layer was monitered. The 550 nm silica beads were synthesized by the hydrolysis and condensation reaction of tetraethylorthosilicate in basic solution. The amine groups were introduced onto the surfaces of silica particles by treatment with 3-aminopropyltrimethoxysilane. The close-packed layer of silica beads on the coverslip was obtained by the reaction of the amine-functionalized silica beads and the (3-triethoxysilyl)propylsuccinic anhydride treated coverslip. BALB/3T3 fibroblast cells were loaded on bare glass, APTMS coated glass, and silica bead coated glass with the same initial cell density, and the migration and proliferation of cells on the substrates was investigated. The cells were fixed and stained with antibodies in order to analyze the changes in the actin filaments and nuclei after culture on the different surfaces. The motility of cells on the silica bead coated glass was greater than that of the cells cultured on the control substrate. The growth rate of cells on the silica bead coated glass was slower than that of the control. Because the close-packed layer of silica beads gave an embossed surface, the adhesion of cells was very weak compared to the smooth surfaces. These results indicate that the adhesion of cells on the substrates is very important, and the actin filaments might play key roles in the migration and proliferation of cells. The nuclei of the cells were shrunk on the weakly adhered surfaces, and the S1 stage in which DNA is duplicated in the cell dividing processes might be retarded. As a result, the rate of proliferation of cells was decreased compared to the smooth surface of the control. In conclusion, the results described here are very important in the understanding of the interaction between implanted materials and biosystems.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.5
• /
• pp.422-431
• /
• 2022

Purpose: At the beginning of the Coronavirus disease (COVID-19) epidemic, physicians paid close attention to children with chronic diseases to prevent transmission or a severe course of infection. We aimed to measure the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibody levels in children with chronic gastrointestinal and liver diseases to analyze the risk factors for infection and its interaction with their primary disease. Methods: This cross-sectional study analyzed SARS-CoV-2 antibody levels in patients with gastrointestinal and liver diseases (n=141) and in healthy children (n=48) between January and February 2021. Results: During the pandemic, 10 patients (7%) and 1 child (2%) had confirmed COVID-19 infection (p=0.2). The SARS-CoV-2 antibody test was positive in 36 patients (25.5%) and 11 children (22.9%) (p=0.7). SARS-CoV-2 antibody positivity was found in 20.4%, 26.6%, 33.3%, and 33.3% of patients with chronic liver diseases, chronic gastrointestinal tract diseases, cystic fibrosis, and liver transplantation recipients, respectively (p>0.05, patients vs. healthy children). Risk factors for SARS-CoV-2 antibody positivity were COVID-19-related symptoms (47.2% vs. 14.2%, p=0.00004) and close contact with SARS-CoV-2 polymerase chain reaction-positive patients (69.4% vs. 9%, p<0.00001). The use, number, and type of immunosuppressants and primary diagnosis were not associated with SARS-CoV-2 antibody positivity. The frequency of disease activation/flare was not significant in patients with (8.3%) or without (14.2%) antibody positivity (p=0.35). Conclusion: SARS-CoV-2 antibodies in children with chronic gastrointestinal and liver diseases are similar to that in healthy children. Close follow-up is important to understand the long-term effects of past COVID-19 infection in these children.

• Journal of agricultural medicine and community health
• /
• v.20 no.2
• /
• pp.187-195
• /
• 1995

Hwamunsok(mat with flower design) is a special product of Kanghwa, which is made up of cyperus exaltatus. According to Allergy, cyperus exaltatus is one of the inhalant allergens and provokes respiratory symptoms and signs. There have been few reports about respiratory allergic disease or contact dermatitis occurring in farmers who cultivate the cyperus exaltatus or manufacture Hwamunsok with it. We studied the relationship between allergic symptoms and exposure to cyperus exaltatus. First, we questioned 141 voluntaries living in Kangwha on the symptoms of contact dermatitis, allergic rhinitis and bronchial asthma. Secondly, open tests with cyperus exaltatus were done to permitted 73 voluntaries. Patch tests with the European standard series(23 antigens) were only done to exposure 49 subjects to cyperus exaltatus. The results were as follows : 1. As the manifestation rate of allergic symptoms by age, its of 60 years old over in male showed 333 per 1,000 persons. Its of 50 years old in female showed 412 per 1,000 persons. Those age groups in both genders exhibited the highest manifestation of allergic symptoms than all other age groups. Also, if age and sex were adjusted with the rural population of Kanghwagun('93 base population), the manifestation rate of allergic symptoms in male showed 283 per 1,000 persons. Its in female and totals of study populations showed which is each 206 and 234 per 1,000 persons. Specially, it showed that statistics significantly(p=0.002), exposured subjects by cultivation of cyperus exaltatus & manufacture of Hwamunsok have experienced symptoms of contact dermatitis more frequently than unexposured subjects. Secondly, it tested statistics significantly that the risk factor as manifestation of allergic symptoms was the exposure of cyperus exaltatus's allergen(p=0.024). The manifestation risk of allergic symptoms in exposure groups was 3.73 times higher than unexposured subjects. Thirdly, positive reactions in open tests with cyperus exaltatus were higher in exposured subjects than non-exposured subjects. After 72 and 96 hours, positive reactions in open tests were all 10 subjects(20.4%). Also, after 1 week, positive reactions were 8 subjects(16.4%). In conclusion there is a close relationship between contact dermatitis and exposure to cyperus exaltatus while cultivating it and manufacturing Hwamunsok. Therefore, various studies should be continued and a health education program undertaken on contact dermatitis with those who were be engaging in Hwamunsok's manufacture.

• Pediatric Infection and Vaccine
• /
• v.23 no.2
• /
• pp.94-101
• /
• 2016

Purpose: This study aimed to describe the results of a contact investigation on health care workers after exposure to a house officer with smear-positive pulmonary tuberculosis (TB). Methods: Eighty nine out of 101 subjects who had close contact with the index patient agreed to be enrolled in the investigation. The first contact investigation was conducted approximately 30 days after the index patient's onset of symptoms, followed by the second investigation after 10 weeks. In both, clinical manifestations were studied, and chest X-ray and tuberculin skin test (TST)/QuantiFERON-TB Gold (QFT-G) in dual screening strategy were conducted. Results: The first TST resulted in positive in 34 subjects (38.2%). QFT-G was conducted on 16 subjects who tested positive in the first TST and aged under 36. Six of them (37.5%) were positive. The second TST was conducted on 41 subjects with negative results in the first TST. Seventeen (41.5%) were positive and among them, three (17.6%) showed positive QFT-G. None of the subjects were diagnosed with active TB. The probability of TB infection through contact with the index patient was 7.3% (3/41) in dual screening strategy while it was 41.5% (17/41) in TST strategy. Conclusions: This first hospital-setting contact investigation for tuberculosis in Korea revealed that latent tuberculosis infection (LTBI) rates vary depending on different diagnostic strategies. This indicates the need for systematic guidelines for diagnosing LTBI in health care workers who have professional exposure to TB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.41-43
• /
• 2022

In order to prevent and block infectious diseases caused by the recent COVID-19 pandemic, non-contact biometric information acquisition and analysis technology is attracting attention. The invasive and attached biometric information acquisition method accurately has the advantage of measuring biometric information, but has a risk of increasing contagious diseases due to the close contact. To solve these problems, the non-contact method of extracting biometric information such as human fingerprints, faces, iris, veins, voice, and signatures with automated devices is increasing in various industries as data processing speed increases and recognition accuracy increases. However, although the accuracy of the non-contact biometric data acquisition technology is improved, the non-contact method is greatly influenced by the surrounding environment of the object to be measured, which is resulting in distortion of measurement information and poor accuracy. In this paper, we propose a context-based bio-signal modeling technique for the interpretation of personalized information (image, signal, etc.) for bio-information analysis. Context-based biometric information modeling techniques present a model that considers contextual and user information in biometric information measurement in order to improve performance. The proposed model analyzes signal information based on the feature probability distribution through context-based signal analysis that can maximize the predicted value probability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.5
• /
• pp.396-405
• /
• 2001

Osseointegrated implants are used for the fixation of dental prosthesis with good long-term clinical results. In an attempt to improve the quantity and quality of the bone-implant interface, numerous implant modification have been used. Implants surface modifications have been used such as titanium-plasma sprayed, hydroxyapatite-coating, sandblasted, sandblasted and acid-etched, acid-etched. Rough surface implants have greater implant surface area and enhance the bone-implant interface and improve stabilization. The purpose of present study was to evaluate light microscopic and scanning microscopic examinations and removal torque value of newly developed calcium phosphate blast and acid-etched implant in the femur of rabbits. Titanium plasma sprayed(TPS) implant served as controls. After 12 weeks of healing of the femurs of 12 rabitts, the implant-containing segments of femur were removed on bloc and bone block including sections. Histologic examination and histomorphometric and removal torque values comparision were made for two implants. Obtained results are follows: 1. Newly developed calcium phosphate blasted and acid-etched implants were in close contact with bone under light microscopic examinations. 2. New implants showed mean bone-to implant contact 59.8%, whereas TPS implants showed mean bone-to implant contact 54.5% (statistically no difference p<0.05). 3. New implants showed mean bone density 56.7%, whereas TPS implants showed mean bone density 49.2% (statistically difference p<0.05). 4. New implants demonstrated mean removal torque values 40.5Ncm, whereas the mean removal torque values of TPS implants ranged 39.3Ncm. No statistical differences(p<0.05) were observed between two groups of implants nor was there any difference between the two implants at the clinical level.