• Journal of the Korea Institute of Building Construction
• /
• v.22 no.3
• /
• pp.251-258
• /
• 2022

In the cement industry, in order to reduce CO₂ emissions, technology for raw materials substitution and conversion, technology for improving process efficiency of utilizing low-carbon new heat sources, and technology for collecting and recycling process-generated CO₂ are being developed. In this study, we conducted a basic experiment to contribute to the development of CSC that can store CO₂ as carbonate minerals among process-generated CO₂ capture and recycling technologies. Three types of CSC clinker with different SiO₂/(CaO+SiO₂) molar ratios were prepared with the clinker raw material formulation, and the characteristics of the clinker were analyzed. As a result of analysis and observation of CSC clinker, wollastonite and rankinite were formed. In addition, as a result of the carbonation test of the CSC paste, it was confirmed that calcite was produced as a carbonation product. The lower the SiO₂/(CaO+SiO₂) molar ratio in the CSC clinker chemical composition, the lower the wollastonite production amount, and the higher the rankinite production amount. And the amount of calcite production increased with the progress of carbonation of the CSC paste specimen. It is judged that rankinite is more reactive in mineralizing CO₂ than wollastonite.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.328-334
• /
• 2014

This study reviewed the usability of sludge, a material that is additionally created when polysilicon (a solar light material) is produced, as the raw material for cement clinker. It was evaluated that when cement clinker is produced, the chloric component of polysilicon acted as a mineralizer in the firing process. In addition, the physical features of the produced cement were measured. The setting time of the produced cement was reduced as the amount of content of polysilicon sludge increased. Such results were drawn because the chloric component acted as hydration accelerator and enhanced the dissolution of calcium hydroxide that was formed by hydration of $C_3S$. Furthermore, for such reason, on the day 1, the compression strength of mortar increased as the content of polysilicon sludge increased. In day 3, 7, and 28, the tendency in which the compression strength increasing up to 5% of the amount of added polysilicon sludge was shown. It is because when clinker was produced, the chloric component increased the amount of $C_3S$ mineral created, thus enhancing the compression strength after day 3.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.75-76
• /
• 2023

In the cement industry, various research initiatives are underway to achieve carbon neutrality. Mineral carbonation is a technology that converts carbon dioxide into minerals for storage, and CO₂ reactive hardening cement is a type of cement that incorporates mineral carbonation technology. In this study, we aimed to manufacture CO₂ reactive hardening cement for reducing carbon emissions in the cement industry by utilizing waste concrete powder generated in the construction sector.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.521-524
• /
• 2008

The purpose of this study is to identify the character and condition of Cr in the clinker and thereby contribute to the research for reduction in utilizing Cr in the cement manufacturing process. The concentration of chromium by cement particle size and the distribution of chromium by clinker mineral were measured. Next, correlation was considered between chromium and the soluble components in cement. As a result, in the range that cement particles were 20${\mu}$m or less, highest soluble hexavalent chromium was found. When the concentration of chromium was measured through mineral separation, belite and the interstitial phase were higher in chromium than in alite. soluble hexavalent chromium was contained in domestic cement less than 20ppm, and its conversion ratio was somewhat high as 10 to 40% or so.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1235-1240
• /
• 2003

The mixtures which are in the chemical composition of Portland cement were prepared from oyster shell, casting dust and BOF slag. The clinkerbility and the behaviour of formation of clinker minora]s were studied using the mixtures mainly by the mineral and microstructural observation. By virtue of the characteristics of starting raw materials, the clinkering temperature was lower as much as 100$^{\circ}C$ than that of a mixture prepared from normal raw materials. Uncombined calcium oxide was vanished entirely below 1350$^{\circ}C$. and the formation of major cement minerals such as alite and belite could be nearly accomplished without too much liquid phase within 1400$^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1027-1036
• /
• 1997

The reology and several physical properties of cements are studied by varying the different mineral composition and particle size distribution(PSD) of cements with closed circuit ball mill for high workability, low heat of hydration, and high strength. In this study, we found that the workability of concretes is related to the viscosity of cement, and affects to strength. Here, this workability is affected by mineral composition (C3A) and the PSD. Especially, rosin-rammer index and 44${\mu}{\textrm}{m}$ residue in the PSD of cements are affected to water demand, casting property, slump loss, strength of cements. From the above results, the conditions of cement for high workability, low heat of hydration and high strength are to use low C3A clinker, 5-10% slag addition, and to grind cement below 0.7 rosin-rammer index, above 3.5-4.5% 44 ${\mu}{\textrm}{m}$ residue, 4000$\pm$100 $\textrm{cm}^2$/g blaine. Such cements are, therefore, supurior to super low heat cement and slag-blended cement in comparing the physical properties of strength, slump, slump-flow, adiabetic temperature, etc.

• Journal of the Korean Ceramic Society
• /
• v.35 no.5
• /
• pp.479-485
• /
• 1998

Raw mateials such as limestone quartzite bauxite and anhydrite were used in the production of mod-ified beloite cement. Two kinds of clinker were synthesized with relatively higher content of $C_2S$ than that of $C_4A_3{\={S}}$ Concerning $C_2S$ the main mineral component borax ($Na_2O\;2B_2O_3\;10H_2O$) was added to stimu-late hydraulic reactivity and this would be possible by stabilizing ${\alpha}'-C_2S$ at room temperature. We had in-tended to compare burning and hydraulic characteristics of clinkers with one another by varying the amount of borax addition and to study the appropriate amount of anhydrite addition needed in the strengthening of cement during hydration. It was concluded that the effective amount of borax addition ne-eded for stabilization of ${\alpha}'-C_2S$ was 5 wt% in 60wt% $C_2S$ inclusive clinker and adding anhydrite in the ra-tio of 1.3 of $SO_3/Al_3O_3$ was appropriate in the production of cement by this clinker. Only ettringite was seen to contribute to the strength without additives but C-S-H was found to form along with ettringite with the addition of borax in the initial stage of hydration.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.155-160
• /
• 1998

In this study, the estimation method of adiabatic temperature rise of concrete was developed by using hydration heat generation of mineral compounds of clinker and pozzolans. Specific heat considered the effects of mix proportion and temperature was calculated with experimental data. The adiabatic temperature rise calculated by developed method were compared with experiments in which many types of cement and admixtures were used. As the results of this study, it was found that the developed method could calculate adiabatic temperature rise of concrete accurately without the experiment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.97-102
• /
• 1997

In this study, a predictive method which was modified from KIshi's model for the temperature development of concrete was developed by using mineral compounds of clinker and pozzolans. Temperature dependent heat generation of reaction was also considered. Specific heat considering the effect of mix proportion and temperature was calculated with experimental data in the literatures. Thermal conductivity considering the effect of mix proportion and temperature was experimentally investigated. Through this research it was found that the developed method considering thermal properties accurately predicted adiabatic temperature rise of concrete without the experiment. It was also found that the thermal conductivity of concrete could be predicted by the volume ratio of each component of mix proportion and was independent of temperature within the normal climatic range.

• Journal of the Korean Ceramic Society
• /
• v.20 no.1
• /
• pp.13-18
• /
• 1983

The investigations have been carried out to study the characteristics of limestone using in Korean cement industry with prime interests in the dissociation and thermal phase changes of limestone between 90$0^{\circ}C$ and 140$0^{\circ}C$ The range of decomposition temperature of limestone was 840-87$0^{\circ}C$ and it was considered that the temperature was lowered by impurities in the limestone. The more the impurities and the finer the grain size of quartz in limestone the lower temperature was applied in forming $C_2S$ mineral the temperature of about 100$0^{\circ}C$. The major clinker minerals such as $C_3S$, $C_2S$, $C_3A$ and $C_4AF$ were formed in most of limestone when the firing temperature was up to 130$0^{\circ}C$.