• Tribology and Lubricants
• /
• 제22권4호
• /
• pp.203-210
• /
• 2006

Two kinds of crankshaft oil supply system which were called continuous and discontinuous oil sup-ply system have recently been adopted in engine developing process. In order to clarify the lubrication characteristics for theses systems, in this paper, the comparison studies on supplied oil temperature, pressure, aspect ratio of bearings, and radial clearance were carried out for the main and the connecting rod bearing using computational fluid dynamic analysis.

• 대한의용생체공학회:의공학회지
• /
• 제14권3호
• /
• pp.227-234
• /
• 1993

Hemofilter was optimally designed and manufactured using polysulfone hollow fiber mem- brane with surface area of 0.6mE Molecular weight cut-off of the hemofilter was measured with polyethylene glycol and dextran aqueous solutions of various molecular weights and it was ranged from 9,500 to 38,900. Ultrafiltration rates were measured with pure water in a static system and flowing system. The clearance of urea, creatinlne, and vitamine BIB were measured using aqueous solutions.

• Tribology and Lubricants
• /
• 제27권2호
• /
• pp.71-76
• /
• 2011

In this study, the nondimensional load capacity of water hydrodynamic journal bearings is calculated. A generalized coordinate formulation is applied to handle the complexity of bearing geometry. A window-based analysis program is developed to analysis the cylindrical hydrostatic bearings. Load capacities are calculated according to some design parameters such as clearance, diameter of orifice, size of recesses and temperature. The results are presented and discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.225-236
• /
• 1991

Thermoleastoplastic analysis of a typicaldevice consisting of tube and moving part having an initial clearance in between, which is subjected mechanical and thermalload, has been carried out toexamine the cause of malfunction mainly at hightemperature condition, and to improve the design. Permant deformation, extraction force, and stress distributions are discussed by using finite element method. The extraction energy can be remarkably reduced by changing the configuration of the cylinder from straight-type to ta[er-type and this effect has been proved by sustained cyclic test.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.356-363
• /
• 2001

Piston seal is a device designed to prevent leakage in split connecctions or between relatively moving part. Contact force, critical pressure at which extrusion occurs, leakage rate, fluid film thickness and friction force have been analyzed for some design parameter such as clearance between cylinder wall piston, depth of rectangular groove and pressure of sealed hydraulic fluid. In this paper, we analyze displacement and stress of Wearing by finite element analysis to understand Contact Behaviour Characters.

• Tribology and Lubricants
• /
• 제5권1호
• /
• pp.69-75
• /
• 1989

The mobility method of dynamically loaded journal bearings was applied to optimize the lubrication of the main journal bearing of the crank press. The effects of oil viscosity, temperature bearing clearance, length, the existence of the circumferential groove, peak press force, and crank rpm were examined. From the results of the minimum film thickness and the maximum film pressure, some of the factors could be optimized, and the degrees of the beneficial and detrimental effects of the others could be estimated.

• 소성∙가공
• /
• 제30권6호
• /
• pp.275-283
• /
• 2021

A parametric study was conducted on the effects of five fundamental design parameters on springback, including die clearance, step height, step width, punch radius, and taper relief in an L-bending process, controlled by the compression force. The experiment was also conducted to verify the usefulness of the parametric study procedure for process design, as well as the finite element predictions. The elastoplastic finite element method was utilized. The L-bending process of the york product, which is a key part of the breaker mechanism, was employed. The deformation of the material was assumed to be due to plane strain. Five samples of each design parameter were selected based on experiences in terms of process design. The finite element predictions were analyzed in detail to show a shortcut towards the process design improvement which can replace the traditional process design procedure relying on trial-and-errors. The improved process design was verified to meet all the requirements and the predictions and experiments were in good agreement.

• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.87-95
• /
• 2007

The recent completions of free-form spatial structures provide us a very attractive form. To realize such an extraordinary shape, it is absolutely necessary that the connector systems have to be investigated the characteristics of the systems and analyzed with a practicable method. In this context, this research consists of not only literature research but also numerical analysis with selected connector systems, which was adopted in real free-form spatial structures. For numerical analysis, especially, finite element analysis (FEA) is performed with a various test parameter using a commercial program ANSYS. Consequently, the general characteristics of node connectors the moment-rotation-curves are presented by considering a large deformation effect as well as a multi-linear material properties.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.190-195
• /
• 2001

The piercing and blanking of thin sheet metal working is specified division in press die design and making. In order to prevent the defects, the optimum design of the production part, strip process layout, die design, die making and try out etc. are necessary the analysis of effective factors. For example, theory and practice of metal shearing process and it's phenomena, die structure, machine tool working for die making, die materials and it's heat treatment, metal working in field, their know how etc. are included in those factors. In this study, we analyzed whole of data base, theoretical back ground of metal working process, and then performed the progressive die tryout with the screw press.

• 전자공학회논문지A
• /
• 제33A권12호
• /
• pp.72-76
• /
• 1996

A CMP system is newly proposed and analyzed by a home-made computer progarm. The proposed system is possibly to lower bull's eye effects such that the planarity of a wafer surface using a CMP system can be drasitcally improved. The optimum conditions for a design of the proposed system are verified using the home-made simulation program. For the proposed CMP system with a 12" diameter of platen, the optimum design conditons are the 0.09", 0.10", 0.12", and 0.14", clearance from the platern edge for wafer diameters of 5", 6", 8", and 12", respectively. These clear distance such as 0.09", 0.10", 0.12", and 0.14" are optimum lengths of the sample wafers extended ffrom the platen edge. In other words, shorter orbital lengths result in lowering of Bull's eye effects.