• Journal of the Korean Home Economics Association
• /
• v.43 no.11 s.213
• /
• pp.127-140
• /
• 2005

Sanitary management performance and knowledge of employees in hospital food service was evaluated by survey questionnaire to improve their sanitary management performance, analyse the weak points of sanitary management, and determine more practical and efficient alternatives of sanitation education. For this study, we selected 6 dieticians and 250 employees working in the six general hospitals larger than 400 beds in Gyeonggi and Incheon area. The questionnaire consisted of three parts: general subjects in the nutrition division of hospitals, sanitation education of dieticians, and sanitary management performance and knowledge of employees. The average ratio of HACCP related equipment and facilities of the target hospitals was relatively high at $86.5\%$. The number of sanitation education was 1.99 times/month by regular schedule and 6.47 times/month by occasional schedule. The average dietician's inspection time of cooking was 178.77 minutes/day. The average point of sanitary management performance was 4.62/5.0, showing a relatively high grade. In each region of sanitary management performance, food treatment sanitation was marked with the highest point, at 4.85, fellowed by cleaning and sterilizing sanitation at 4.65, personnel sanitation at 4.61 point and device and utensil sanitation was ranked with the lowest point at 4.53. Sanitary management performance was affected by the number of occasional education which was highest at 6-10times/month. The mean score of sanitary knowledge was 11.17/15.0. The assigned position, type of employment, status, working career and number of occasional education affected the mean score of sanitary knowledge of employees significantly. Sanitary knowledge of employees was highest in the case that occasional education was peformed at 6-10 times/month. There was no correlation between the sanitary management performance and sanitary knowledge of employees. In contrast, there were correlations between sanitary management performance and dietician's inspection time of cooking and number of employees.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.419-426
• /
• 2011

Objective: The objective of this study was to evaluate a work of guards, using an ergonomic method(work analysis and posture analysis). Background: Most studies about guards were conducted in the field of medical, problems of shift, and the physical problems of old workers and social problems. But, guards consist of vulnerability group so it needs an ergonomic research in musculoskeletal disorders. Method: A head of an ergonomic estimation was work analysis(determination of combined task, work tool, work time and frequency of combined task) and posture analysis(upper body and lower body) of workers based on the video. Results: The result showed that combined task of guards was classification of patrolling, security, cleaning and waiting. The security indicated the highest ratio in the work time of combined tasks. The results of posture analysis for guards indicated high value in neutral. But, lower arm indicated high value in bending(left: 59%, right: 50%). Conclusion: The results of ergonomic methods indicated that guards' physical work load was not high during work, but comfortable work environment would be required for old guards. Application: If an ergonomic rule can be integrated into existing work environments, the risk of occupational injuries and stress will be reduced.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.464-472
• /
• 2002

The aim of this study was to elucidate dyeability and antimicrobial activity of cotton fabrics dyed with Sophora Radix extracts according to various mordants. Dyes were extracted from Sophora Radix using ethanol. Then, cotton fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60% (owf, the mordant was 3% (owf), L.R was 1:20, the temperature was 60~7$0^{\circ}C$, the time of dyeing was 60min., and the time of mordanting was 60min.. The dyeability was evaluated by surface color and color fastness. The skin microorganism was evaluated on S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E. coli, A. niger, C. albicans and T. mentagrophytes. The results are as follows; 1. When mordants were treated, surface color was 3.3Y to 0.1 GY in H (hue) value which indicated greenish yellow to yellow 2. The color fastness to perspiration, dry-cleaning, rubbing, and washing stain fabric showed 4~5 degree. The color fastness to light was improved to 4 degree by treatment of mordants. The color fastness to washing was 2 degree which was somewhat poor. 3. Cotton dyed with ethanol extracts was excellent on S. aureus, B. subtilis, S. epidermidis and p. antis. But that showed poor antibacterial activities on P. aeruginosa and E. coli such as gram negative baterials 4. Antibacterial activity of cotton fabrics dyed didn't be improved by treatment of mordant 5. Antifungal activity of cotton dyed with ethanol extracts was excellent on T. mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 hours in cotton dyed mordanting with SnCl$_2$.$_2$$H_2O$.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.617-626
• /
• 2020

The drilling mud is essentially used in oil and gas development. There are several roles of using the drilling mud, such as cleaning the bottomhole, cooling and lubricating the drill bit and string, transporting the cuttings to the surface, keeping and adjusting the wellbore pressure, and preventing the collapse of the wellbore. The fragments from rocks and micro-sized bubbles generated by the high pressure are mixed in the drilling mud. The systems to separate those mixtures and to keep the uniformly maintained quality of drilling mud are required. In this study, the simulation is conducted to verify the performance of the mud tank's agitation capacity. The primary role of the mud tank is the mixing of mud at the surface with controlling the mud condition. The container type is chosen as a mud tank pursuing efficient transport and better management of equipment. The single- and two-phase simulations about the agitation in the mud tank are performed to analyze and identify the inner flow behavior. The convergence of results is obtained for the vertical- and axis-direction velocity vector fields based on the grid-dependency tests. The mixing time analysis depending on the multiphase flow conditions indicates that the utilization of a two-stepped impeller with a smaller size provides less time for mixing. This study's results are expected to be utilized as the preliminary data to develop the mixing and integrating equipment of the onshore drilling mud system.

• Korean Journal of Dental Materials
• /
• v.43 no.1
• /
• pp.17-28
• /
• 2016

The aim of this study was to evaluate the changes in dentinal permeability after application of dentin desensitizer on exposed dentin immediately after ultrasonic scaling to teeth with non-carious cervical lesions. Thirty caries-free extracted molars were fixed to slide glasses after horizontally being sectioned at 5 mm below the cemento- enamel junction (CEJ). The prepared specimen was connected to a fluid flow measuring device (nano-Flow), and a V-shaped cavity was formed at the CEJ to imitate the non-carious cervical lesion. After no fluid leakage was confirmed in the connected system with specimen, tooth surface was treated ultrasonic cleaning with piezoelectric ultrasonic scalers until dentinal tubules were exposed. And 6 different desensitizers were applied on exposed dentin. Real-time measurements of dentinal fluid flow were performed during ultrasonic scaling and application of dentin desensitizer. To evaluate the occlusion of exposed dentinal tubules, tooth surface was examined by SEM. Following results were observed. After ultrasonic scaling, more dentinal tubules were exposed on the tooth with non-carious cervical lesions compared to tooth without lesions. The rate of fluid flow measured with nano-Flow system had correlation with the degree of dentin occlusion observed with SEM after application of desensitizers on exposed dentin. Desensitizers with glutaraldehyde and HEMA did not decrease the rate of fluid flow and did not show dentin occlusion. Desensitizers with oxalate showed the limited effects on the rate of fluid flow and dentinal tubule occlusion. Desensitizer with resin monomer showed the significant effect on the rate of fluid flow and dentin occlusion.

• Microbiology and Biotechnology Letters
• /
• v.47 no.2
• /
• pp.259-268
• /
• 2019

In this study, the extracellular metalloprotease from Serratia marcescens PPB-26 was purified to homogeneity via ethanol fractionation and DEAE-cellulose column chromatography. Thus, a 3.8-fold purification was achieved with a 20% yield and specific activity of 76.2 U/mg. The purified protease was a 50-kDa monomer whose optimum pH and temperature for activity were 7.5 and $30^{\circ}C$ respectively; however, it was found to remain active in the 5-9 pH range and up to $40^{\circ}C$ for 6 h. The protease had a half-life of 15 days at $4^{\circ}C$, an optimum reaction time of 10 min, and an optimum substrate (casein) concentration of 0.25%. Furthermore, the Michaelis constant ($K_m$) and reaction velocity ($V_{max}$) of the protease were calculated to be 0.28% and $111.11{\mu}moles/(min{\cdot}mg)^{-1}$, respectively. The protease was stable when subjected to metal ions (2 mM), showing increased activity with most (especially $CoCl_2$ and $MgSO_4$ (30.54% increase)). It was also stable when exposed to oxidizing agents, bleaching agents, and detergents (5% v/v for 60 min). It retained 93% of its activity in non-ionic detergents (Tween-20, Tween-80, and Triton X-100). Moreover, wash performance analysis in commercial detergents (Ariel and Tide) showed that not only was the protease capable of protein stain removal, but also reduced cleaning time by 80% when added to detergents. Thus, the Serratia marcescens PPB-26 metalloprotease appears to be a promising new candidate as a laundry additive in the detergent industry.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.287-298
• /
• 2019

Lotus leaf has a special dual micro and nano surface structure which gives its highly hydrophobic surface characteristics and so-called self cleaning effect. In order to endow PVDF hollow fiber membrane with this special structure and improve the hydrophobicity of membrane surface, PVDF hollow fiber composite membranes was obtained through the immersion coating of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) dilute solution on the outside surface of PVDF support membrane. The prepared PVDF composite membranes were used in the vacuum membrane distillation (VMD) for the desalination. The effects of PVDF-HFP dilute solution concentration in the dope solution and coating time on VMD separation performance was studied. Membranes were characterized by SEM, WCA measurement, porosity, and liquid entry pressure of water. VMD test was carried out using $35g{\cdot}L^{-1}$ NaCl aqueous solution as the feed solution at feed temperature of $30^{\circ}C$ and the permeate pressure of 31.3 kPa. The vapour flux reached a maximum when PVDF-HFP concentration in the dilute solution was 5 wt% and the coating time was kept in the range of 10-60 s. This was attributed to the well configuration of micro-nano rods which was similar with the dual micro-nano structure on the lotus leaf. Compared with the original PVDF membrane, the salt rejection can be well maintained which was greater than 99.99 % meanwhile permeation water conductivity was kept at a low value of $7-9{\mu}S{\cdot}cm^{-1}$ during the continuous testing for 360 h.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.109-115
• /
• 2018

This study was conducted to solve the water shortage problem by reclaiming urine from homes or public places and using it as cleaning water for toilets. The process used in this experiment is a chemical oxidation process combining ozone, hydrogen peroxide, and UV. We set the key substance that is to be removed as chromaticity and conducted the experiment to remove it. If the quantity or concentration of injected ozone, UV, and hydrogen peroxide is insufficient, then the chromaticity will initially increase due to low oxidizing power, and will later decrease. In addition, the efficiency of removing chromaticity appeared to be higher, depending on the quantity of ozone injected, for medium concentrated urine than highly concentrated urine. However, the absolute quantity of removed chromaticity was about 68% higher for highly concentrated urine, when 16 g/hr of ozone was injected. The higher the pH level, the reaction time and efficiency of removing chromaticity were higher, and in normal conditions, in reference to a pH of 8.55, there was a 6% difference in efficiency between a pH level of 5.05 and a pH level of 10.12. Finally, when processing urine through an ozone-only process, COD decreased steadily over time, but DOC did not decrease. This is because ozone reacts selectively with organic matter.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.3
• /
• pp.409-422
• /
• 2021

A doctor's coat worn by Seo Jae-pil (1864-1951)-National Registered Cultural Heritage No. 607-was conserved with wet cleaning to remove thick wrinkles and brown stains that had been present for a long time. This paper also applied microscopic observation and infrared spectrophotometric analysis to obtain scientific investigation data on the cotton fabric of this doctor's coat. Information about Seo Jae-pil's time as a doctor, the process of changing his English name, and C.D.Williams & Co., which produced the medical coat, revealed that this doctor's coat was worn by Seo Jae-pil between 1892 and 1898 or 1926 and 1939. Additionally, this paper proposes a pad for filling relics that can protect the shape of modern and contemporary clothing, such as Seo Jae-pil's doctor's coat, for display at a museum site. Specifically, this research provides detailed information on the manufacturing of filling pads that can prevent damage to modern and contemporary jackets and coats so that they can be used in the cultural heritage field by developing filling materials for three-dimensional costume artifacts.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.45-55
• /
• 2022

PURPOSE. This in vitro study investigates the effect of different post-rinsing times and methods on the trueness and precision of denture base resin manufactured through stereolithography. MATERIALS AND METHODS. Ninety clear photopolymer resin specimens were fabricated and divided into nine groups (n = 10) based on rinsing times and methods. All specimens were rinsed with 99% isopropanol alcohol for 5, 10, and 15 min using three methods-automated, ultrasonic cleaning, and hand washing. The specimens were polymerized for 30 min at 40℃. For trueness, the scanned intaglio surface of each SLA denture base was superimposed on the original standard tessellation language (STL) file using best-fit alignment (n = 10). For precision, the scanned intaglio surface of the STL file in each specimen group was superimposed across each specimen (n = 45). The root mean square error (RMSE) was measured, and the data were analyzed statistically through one-way ANOVA and Tukey test (α < .05). RESULTS. The 10-min automated group exhibited the lowest RMSE. For trueness, this was significantly different from specimens in the 5-min hand-washed group (P < .05). For precision, this was significantly different from those of other groups (P < .05), except for the 15-min automated and 15-min ultrasonic groups. The color map results indicated that the 10-min automated method exhibited the most uniform distribution of the intaglio surface adaptation. CONCLUSION. The optimal postprocessing rinsing times and methods for achieving clear photopolymer resin were found to be the automated method with rinsing times of 10 and 15 min, and the ultrasonic method with a rinsing time of 15 min.