• 한국물환경학회지
• /
• 제21권1호
• /
• pp.29-33
• /
• 2005

In order to recycle the waste material and to develop the thickening unit of waste activated sludge from wastewater treatment facilities, the filtration bio-reactor equipped with a shadow mask filter module was employed for this work from which the operating properties and parameters were drawn. The sludge thickening and filtration unit is made of cylindrical acryl tank(12cm i.d. ${\times}$ 58cm height: working volume of 6L), where the flat-sheet type of shadow mask filter module(pore size: 220~250um, opening area: 34.8~39.6%) was installed and the effluent was withdrawn from the effluent port at the lowest point of the reactor, and the filtration was performed only by the hydraulic pressure. For evaluating the operating performance of this reactor, some parameters such as the solid-liquid separation of different biomass concentrations, the water quality of filtrate, the aeration cleaning time and the cleaning effect were investigated. Depending on the MLSS concentrations, the different time to withdraw 3L of filtrate was required in which the longer filtration time was necessary for the higher MLSS concentrations caused by the thicker formation of cake layer: 40 minutes for 5,000 mg/L, 70 minutes for 10,000 mg/L and 100 minutes for 15,000 mg/L, where the concentrations of SS were 8.9, 6.7 and 6.5 mg/L, respectively. Under the same operating conditions (the intensity of aeration cleaning: 80 L/min, MLSS: 10,000 mg/L), the proper aeration cleaning time was revealed 30 seconds, and the stable formation of cake layer was in the range of 10 to 15 minutes. Therefore, the shadow mask considered as a waste material can be of use as a filter material for the sludge thickening system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.99.2-99.2
• /
• 2010

This paper investigates the dependence of a-Si:H/c-Si passivation and heterojunction solar cell performances on various cleaning processes of silicon wafer and surface morphology. It is observed that passivation quality of a-Si:H thin-films on c-Si wafer highly depends on wafer surface conditions. The MCLT(Minority carrier life time) of wafer incorporating intrinsic (i) a-Si:H as a passivation layer shows sensitive variation with cleaning process and surface morpholgy. By applying improved cleaning processes and surface morphology we can obtain the MCLT of $200{\mu}sec$ after H-termination and above 1.5msec after i a-Si:H thin film deposition, which has implied open circuit voltage of 0.720V.

• 상하수도학회지
• /
• 제25권6호
• /
• pp.981-987
• /
• 2011

Biologically treated water contains a large quantity of organic matters and microorganisms which can cause various problems to membrane. The membrane fouling occurred by these reasons is hard to control by single physical cleaning. This study analyzes the efficiency of aeration with chemical backwashing and foulants removal during chemical backwashing. The cleaning efficiency improves when the chemical concentration is high and the contact time of chemical is long. Chemical backwashing with aeration shows exceptional cleaning efficiency which leads the physical cleaning is required during chemical backwashing since it forms flow inside the membrane submerged tank. From the foulants removal analysis, the particles such as turbidity and TOC removal rate increase when the aeration is applied. Dissolved matter of DOC and UV254 removal is dependent on higher chemical concentration. According to FTIR analysis, one of major foulants, the polysaccharide is controlled by the chemical backwashing with aeration condition.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.66-71
• /
• 2023

This paper describes a hybrid cleaning method of silicon wafer combining nano-bubble and ultrasound to remove sub-micron particles and contaminants with minimal damage to the wafer surface. In the megasonic cleaning process of semiconductor manufacturing, the cavitation induced by ultrasound can oscillate and collapse violently often with re-entrant jet formation leading to surface damage. The smaller size of cavitation bubbles leads to more stable oscillations with more thermal and viscous damping, thus to less erosive surface cleaning. In this study, ultrasonic energy was applied to the wafer surface in the DI water to excite nano-bubbles at resonance to remove contaminant particles from the surface. A patented nano-bubble generator was developed for the generation of nano-bubbles with concentration of 1×10⁹ bubbles/ml and nominal nano-bubble diameter of 150 nm. Ultrasonic nano-bubble technology improved a contaminant removal efficiency more than 97% for artificial nano-sized particles of alumina and Latex with significant reduction in cleaning time without damage to the wafer surface.

• Journal of Biosystems Engineering
• /
• 제24권4호
• /
• pp.317-324
• /
• 1999

This study was conducted to decide several design criterion for clean-washed rice processing system development. A Computer simulation was used to predict and analyze the mass balances and moisture changes of the process of clean-washed rice processing system. The following results were obtained from this study. 1. In order to attain the processing capacity of 1,000kg/h of the clean-washed rice processing system, that of the system was designed as 1,400kg/h which was based on the safety factor of 40% and handling capability of mass variations occurred during processing. 2. It was analyzed that the proper time required for aqueous cleaning process should be within one minute. 2. It was analyzed that the proper time required for aqueous cleaning process should be within one minute. 3. The final moisture content of clean-washed rice was controlled being 15%(w.b.) for the sake of safe storage. 4. It was proven that the optimum drying time was three minutes for the clean-washed rice dried by a rotary dryer.

• 전기전자학회논문지
• /
• 제6권2호
• /
• pp.146-151
• /
• 2002

본 논문은 RTOS를 이용하여 정수장의 염소투입을 실시간으로 제어할 수 있는 시스템을 제안하였다. 기존 정수장의 염소투입방식은 유량방법을 이용하여 제어하였으며 계절이나 시간 또는 물의 사용량과 같은 외부환경에 대한 적절한 제어가 불가능 하였다. 따라서 본 논문에서는 유량방법과 잔류염소방식의 2가지 방법으로 시스템을 설계하고, RTOS의 각 태스크는 외부 환경 변화를 실시간으로 체크하여 염소농도 조절에 이용되는 연산의 보정값을 조절할 수 있도록 프로그램 하였다. 제안한 시스템을 2곳의 정수장에 설치하고 설정을 1.2ppm으로 하여 실험한 결과 1.21ppm의 평균값을 유지하였으며 최대, 최소의 편차 또한 0.3ppm으로 기존 정수장보다 우수한 성능을 나타내었다.

• Journal of Animal Science and Technology
• /
• 제62권5호
• /
• pp.682-691
• /
• 2020

Careful cleaning and disinfection of pigpens is essential to prevent disease spread and avoid the resultant economic losses. Hygiene in pigpens is generally evaluated by visual monitoring supplemented with bacteriological monitoring, which includes counting the total aerobic bacteria (TAB) and/or fecal indicator bacteria (FIB). However, these methods present drawbacks such as time and labor requirements. As adenosine triphosphate (ATP) is ubiquitous in all living organisms including microorganisms, this study aimed to directly compare the results of microbial assessment and ATP quantification, and to suggest possible detailed application methods of the ATP test for hygiene evaluation in pigpens of a farrowing unit. Before and after standard cleaning procedures, samples were collected from the floor corner, floor center, and feeding trough of four pigpens at different time points. No FIB were detected and both the TAB and ATP levels were significantly decreased in the floor center area after cleaning. FIB were continuously detected after cleaning and disinfection of the floor corners, and there was no significant ATP level reduction. The feeding trough did not show any significant difference in these values before and after cleaning, indicating insufficient cleaning of this area. The levels of TAB and ATP after cleaning were significantly correlated and the average ATP value was significantly lower in the absence of FIB than in their presence. In the absence of standard references, a more thorough hygiene management could be achieved evenly by supplementing cleaning or disinfection based on the lowest ATP results obtained at the cleanest test site, which in the present study was the floor center. Overall, these results indicate that the on-farm ATP test can be used to determine the cleanliness status, in addition to visual inspection, as an alternative to laboratory culture-based testing for the presence of microorganisms.

• 접착 및 계면
• /
• 제14권1호
• /
• pp.21-27
• /
• 2013

셀룰로오스계 레이온섬유 또는 레이온직물은 좁은 온도범위의 안정화공정 동안에 열분해가 매우 빠르게 진행된다. 그러므로 레이온계 탄소섬유를 제조하는데 있어 안정화단계는 매우 중요한 핵심공정이다. 따라서 본 연구에서는 셀룰로오스계 레이온직물의 중량감소, 화학조성, 미세구조 및 texture 변화에 미치는 등온 안정화공정과 초음파세척의 영향을 조사하였다. $200{\sim}240^{\circ}C$ 영역에서 행한 등온 안정화공정의 온도는 레이온직물을 안정화 소요시간, 탄소함량, 산소함량, 셀룰로오스 구조 변화 그리고 직물 texture에 큰 영향을 주었다. 등온 안정화공정 전에 물을 이용한 초음파세척은 레이온직물의 안정화공정 시간을 단축하고, 안정화 후 직물의 탄소함량을 증가하고, 산소함량을 감소시키며, XRD 분석 패턴을 변화시키는데 역할을 하는 것으로 조사되었다. 또한 초음파세척은 등온 안정화공정시 발생하는 레이온직물의 빠른 중량감소 현상을 더디게 하고, 열수축을 감소시켜, 직물의 급격한 물리적 변화의 완화에도 기여하는 것으로 사료된다.

• 대한인간공학회지
• /
• 제30권3호
• /
• pp.427-435
• /
• 2011

Objective: The objective of this study was to evaluate a work of building cleaners using the ergonomic methods. Background: Previous studies about cleaning worker describe typical physical demands of this work. They found that the most significant risk factors associated with the physical work of cleaners are static loads and repetitive movements and high output of force. Method: A head of ergonomics estimation was work analysis(define of combined task, work tool, work time and frequency of combined task) and posture analysis of worker. Results: The results showed that combined task of building cleaners was classification sweeping, mopping(wet), mopping(oil), moving barrels/carts, dumping trash bags, scrubbing, arrangement of cleaning tool, arrangement of circumferential, moving of cleaning tool, and waiting. The work time of combined task such as mopping(wet) and scrubbing indicated high ratio. The posture analysis of building cleaners indicated high value in bending of the head, lower arm, and hands. Conclusion: The findings appear to indicate that building cleaner were related to high risk of work-related musculoskeletal disorders. So, building cleaner would be required an interventional strategy, improvement of cleaning tools and working environment. Application: If ergonomics rule can be integrated into existing cleaning tools and work environments, the risk of occupational injuries will be reduced.

• 미생물학회지
• /
• 제41권3호
• /
• pp.216-224
• /
• 2005

혈장분획제제 중 혈액응공인자제제와 일부 면역글로불린제제는 혈장에 존재하는 다양한 단백질로부터 유효한 단백성분만을 선택적으로 분리 정제하기 위해 크로마토그래피 방법을 사용하여 생산된다. 효율적인 세척(cleaning) 공정이 이루어지지 않는다면 크로마토그래피는 다양한 종류의 불순물뿐만 아니라 혈액 중 내재 또는 오염 가능성이 있는 위해인자가 오염될 가능성이 있다. 본 연구에서는 혈장분획제제 제조공정에 사용되는 크로마토그래피의 세척 공정에서 혈장유래 바이러스의 제거 및 불활화 공정의 검토 강화로 혈장분획제제의 안전성을 확보하기 위해 크로마토그래피 세척 검증 시스템을 구축하고자 하였다. 크로마토그래피 세척 공정 중 바이러스 제거 검증을 위해 혈장유래 바이러스 중 물리${\cdot}$화학적 처리에 가장 큰 저항성을 갖는 human parvovirus B19의 모델 바이러스의 porcine parvovirus(PPV)를 대상으로 real-time PCR 정량법을 확립하였다. PPV에 특이적인 primer를 선별하였으며 형광염료 SYBR Green I을 사용하여 PPV DNA를 정량하였다. 세포배양법에 의한 감염 역가와 비교한 결과 PCR 민감도는 1.5 $TCID_{50}/ml$이었다. 확립된 검증법의 신뢰성(reliability)을 보증하기 위해 실험법의 특이성(specificity), 재현성(reproducibility) 등을 검증하였다. 구축된 검증시스템을 thrombin 분리${\cdot}$정제를 위한 SP-Sepharose 양이온 크로마토그래피 공정과 factor VIII 분리${\cdot}$정제를 위한 Q-Sepharose 음이온 크로마토그래피 공정에 적용하여 크로마토그래피 세척 검증을 실시하고, 세척 검증 시스템의 적합성을 확인하였다.