• Environmental Engineering Research
• /
• 제21권2호
• /
• pp.203-210
• /
• 2016

Hybrid materials were obtained modifying the bentonite (BC) and local clay (LC) using hexadecyltrimethylammonium bromide (HDTMA) or the clay were pillared with aluminum followed by modification with HDTMA. The materials were characterized by the SEM, FT-IR and XRD analytical tools. The batch reactor data implied that the uptake of $17{\beta}$-estradiol (E2) by the hybrid materials showed very high uptake at the neutral pH region. However, at higher and lower pH conditions, slightly less uptake of E2 was occurred. The uptake of E2 was insignificantly affected changing the sorptive concentration from 1.0 to 10.0 mg/L and the background electrolyte (NaCl) concentrations from 0.0001 to 0.1 mol/L. Moreover, the sorption of E2 by these hybrid materials was fairly efficient since within 30 mins of contact time, an apparent equilibrium between solid and solution was achieved, and the data was best fitted to the PSO (pseudo-second order) and FL-PSO (Fractal-like-pseudo second order) kinetic models compared to the PFO (pseudo-first order) model. The fixed-bed column results showed that relatively high breakthrough volume was obtained for the attenuation of E2 using these hybrid materials, and the loading capacity of E2 was estimated to be 75.984, 63.757, 58.965 and 49.746 mg/g for the solids BCH, BCAH, LCH and LCAH, respectively.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.575-582
• /
• 1998

Sutiability of Jungsan clay shale dolomite sludge Anyang feldspar and alumina as raw materials for light-weight porous ceramics was examined. In order to find optimum manufacturing conditions compositions heating temperatuers and heating times were varied and their effects on physical properties were measured and bloating mechanism was investigated. Jungsan clay seems suitable as raw material to make the light-weight constructional materials with 5wt% of ANyang feldspar and alumina added in calcined clay (800$^{\circ}C$) having bulk density of 0.45g/cm3 water absorption of 1.34% and compressive strength of 85kg/cm2 rapid-heated at 1200$^{\circ}C$ for 30min. It is suggested that bloating mechanism depends on the difference of tem-peratures between the inside and outside in specimen the remained gases in interstices can bloat by the li-quid phase of surface with high viscosity and gas pressure at elevated temperature.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.365-379
• /
• 2009

Epoxy/S2-glass reinforced composites (SGRPs) infused with Cloisite 30B nanoclays were manufactured using the vacuum assisted resin infusion molding (VARIM) process. Prior to infusion, the matrix and clays were thoroughly mixed using a direct mixing technique (DMT) and a high shear mixing technique (HSMT) to ensure uniform dispersion of the nanoclays. Structures with varying clay contents (1-3 wt%) were manufactured. Both pristine and SGRP nanocomposites were then subjected to mechanical testing. For the specimens manufactured by DMT, the tensile, flexural, and compressive modulus increased with increasing the clay content. Similarly, the tensile, flexural, compressive, interlaminate shear and impact strength increased with the addition of 1 wt% clay: however the trend reversed with further increase in the clay content. Specimens manufactured by HSMT showed superior properties compared to those of nanocomposites containing 1 wt% clay produced by DMT. In order to understand these phenomena a morphological study was conducted. Transmission electron microscopy (TEM) micrographs revealed that HSMT led to better dispersion and changed the nanoclay structure from orderly intercalation to disorderly intercalation giving multi-directional strength.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.11-15
• /
• 2003

In order to suppress a repulsive interfacial energy between hydrophilic clay and hydrophobic polymer matrix in preparing a polymer/clay nanocomposite, a third component of amphiphilic nature such as poly($\varepsilon$-caprolactone) (PCL) was introduced into the model system of styrene-acrylonitrile copolymers (SAN)/Na-montmorillonite. Once $\varepsilon$-caprolactone was polymerized in the presence of Na-rnontmorillonite, the successful ring-opening polymerization of $\varepsilon$-caprolactone and the well-developed exfoliated structure of PCL/Na-montmorillonite mixture were confirmed, Thereafter, SAN was melt-mixed with PCL/Na-montmorillonite nanocomposite, which resulted in that SAN matrix and PCL fraction were completely miscible to form homogeneous mixture with retention of the exfoliated state of Na-montmorillonite, exhibiting that PCL effectively stabilizes the repulsive polymer/clay interface and contributes the improvement of mechanical properties of the nanocomposites.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.133-134
• /
• 2017

The In the experiment on flow using sand walls, when white clay+sand was mixed with glutinous rice, traditional paper and seaweed as adherents and preventive measures for cracks, the flow was higher than other sand wall mortars. This indicates that it is effective in improving flow. Moreover, in terms of strength, a mix of white clay+sand, traditional paper and flour had a greater strength than a mix of white clay+sand, straws and flour. In the experiment to test for cracks and shrinking during drying, a composition of white clay+sand+traditional paper showed fewer cracks and less shrinking than the walls where straws were mixed in.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.725-734
• /
• 1996

점토질 소지에 있어서 수축 특성은 성형, 건조 및 소성 공정에 수반되어 치말화거등에 기여할 수 있는 구동력이 될 수 있다. 점토질 소지에서 저수축 치말화거동은 입자크기효과와 상전이 특성에 기인하는 열간 반응전이 거동을 포함하는 공정변수에 따라 크게 변화됨을 보였다. 90$0^{\circ}C$ 및 120$0^{\circ}C$에서 열처리된 Chamotte의 첨가를 통해서 점토질 소지의 열간 치밀화 과정에 기인하는 공정수축은 크게 억제될 수 있었다. 120$0^{\circ}C$에서 열처리된 조대한 Chamotte 입자는 점토 소지의 치밀화 거동을 억제하여 치밀한 소결미세구조를 얻을 수는 없었지만, 조대한 Chamotte 입자의 첨가는 neat-net-shape 제어를 촉진할 수 있었다. 점토질 소지에 있어서 미세구조/물성간의 연관관계는 저수축과 치밀화 거동사이의 상반된 특성을 제어함으로써 얻어진 최적조건에 따라 직접적인 영향을 받을 것으로 판단되었다.

• 디자인학연구
• /
• 제18권4호
• /
• pp.35-44
• /
• 2005

세계적으로 대부분의 금속 공예가들은 장신구 작가라고 불려질 만큼 다른 공예 분야에 비해 산업적인 성격이 강하고 현대에 와서는 기능성 소재와 생산기술을 활용하는 경향이 강하다. 본 연구에서는 장신구 중 하나인 목걸이를 테마로 문헌을 조사하고 Art Clay Silver에 대한 재료적 특성을 분석하였다. 이때 조형체의 수축률은 약 0.24%이었다. 이렇게 상온에서 건조시 수축이 일어나는 현상은 결합제와 분말을 연결해주는 수분의 증발을 생각할 수 있다. Art Clay Silver를 소성 후 EDX를 이용하여 면 분석한 결과 은만이 100% 분석되었다. 이는 상온에서 분말과 함께 존재한 바인더가 높은 소성 온도에서 모두 연소되어 증기와 연기로 사라진 것으로 사료된다. 이러한 특성을 수공예 목걸이 제작 시 어렵고 섬세한 작업에 일부 활용함으로서 보다 자연스럽고 아름다움이 표현된 작품을 보여주고자 하였다.

• 보존과학회지
• /
• 제37권1호
• /
• pp.43-54
• /
• 2021

In this study, a scientific analysis of the gold leaf layers and internal structure of the Clay Seated Vairocana Buddha Triad in Seonunsa Temple, Gochang (Treasure No. 1752) was conducted. The surface of the Buddha statues is a gold foil, and the gold leaf layer consists of four layers. The gold leaf layer first composed on the molding clay was produced in the order of lacquer-fabrics-lacquer-gold foil. Subsequently, it was confirmed that the work was performed three times in the same way. The composition of the Buddha statues was divided into the head, body or upper body, lower body, and pedestal. The body was made in a cylindrical form by connecting vertically oriented wooden materials, and the head and lower body were also connected to the body in an empty form. Thus, the head, body, and lower body are grafted structures that are connected to a single Bokjang-gong. It was confirmed that the Clay Seated Vairocana Buddha Triad in Seonunsa Temple was made using wood materials for the basic form, after which the detailed form was created with molding clay, and the surface was finished with a process of layering gold foil and substances presumed to be lacquer.

• 대한화학회지
• /
• 제14권4호
• /
• pp.309-319
• /
• 1970

Composition of Acid Clay, the raw material for activated clay manufacturing, was investigated to develop useful data in deciding activation condition. Speculations on components and structure of activated clay were also made in order to see how included components of raw materials change during activation process. And a study was made on relations between structure of activated its adsorptivity. For this research, theremogravimetric analysis, X-ray differaction analysis and calculation of adsorptive index were carried out.

• 한국식품영양과학회지
• /
• 제46권3호
• /
• pp.394-399
• /
• 2017

플라스틱 포장 폐기물로 인한 환경오염을 해결하기 위한 대안으로 생분해성 필름이 많이 연구되어 왔다. 본 연구에서는 우럭 껍질 젤라틴(RFG)과 nano-clay(Cloisite $Na^+$, 10A)의 복합필름의 특성에 관하여 연구하였다. 우럭 껍질로부터 젤라틴을 추출하여 sorbitol을 가소제로서 첨가한 단백질 필름을 제조하였고, 제조된 RFG 필름의 tensile strength(TS), water vapor permeability(WVP), water solubility(WS)는 각각 15.0 MPa, $2.70{\times}10^{-9}g\;m/m^2\;s\;Pa$, 53.8%였다. RFG에 nano-clay를 첨가한 복합필름은 TS가 증가하고 WVP와 WS는 감소하였다. XRD 분석과 SEM 측정 결과를 통하여 RFG/nano-clay 복합필름 내부에 박리형 구조를 형성함을 확인할 수 있었다. 결론적으로 본 연구 결과 RFG/nano-clay 복합필름은 생분해성 포장재로 적용될 수 있음을 시사한다.