• Journal of Engineering Education Research
• /
• v.20 no.4
• /
• pp.61-66
• /
• 2017

Automatic flow control system composed by hardware and software was designed and fabricated to be used as teaching tool of feedback control theory in university experimental class. This system includes hardwares like data acquisition board, flow measuring device, transmitters, and the pneumatic valve, and software like LabView program for the monitoring and control of flow rates. The system was designed as the student can see the control effect of not only set point but also disturbance changes. Also the LabView program was composed for the calculation of controller parameters of both Ziegler-Nichols and Cohen-Coon tuning. The students can apply both tuning constants and compare the control performances. This system will provide the easy way for the students to understand the function and specification of control hardwares, and to raise the programing ability of control software.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.933-937
• /
• 2010

This study aimed at the introduction of desktop method for assessment of environmental flows developed by IWMI(International Water Management Institute) recently and its application to Geum river basin. This scheme simulated the influence on aquatic ecosystem caused by watershed development and in turn the decrease of water quantity keeping the river's own flow regime. It was found to be as very effective method although it had simple structure. Flow duration curves for different environmental classes at Sutong and Gongjoo sites were estimated according to the natural conditional scenario of Geum river basin and the results were relatively compared well with the previous studies. The behaviors of monthly average runoff time series of both sites showed the level of A class. The results of this study would provide the fundamental data to establish the future plans of monitoring or management for aquatic ecosystem of Geum river basin.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.6
• /
• pp.1091-1097
• /
• 2015

Objectives: The purpose of this study was to examine the relationship between educational satisfaction and learning participation of dental hygiene students. Method: A self-reported questionnaire was completed by 344 dental hygiene students in Gyeonggido, Chungcheongdo, and Gyeongsangdo from June 2 to 24, 2014, The questionnaire consisted of general characteristics of the subjects(3 items), choice reason of dental hygiene(7 items), educational satisfaction(22 items), and learning participation(11 items). The educational satisfaction and learning participation were assessed by Likert 5 points scale. Data were analyzed by a statistical package SPSS WIN 18.0. Results: Educational satisfaction included educational environments, teaching, educational content and educational effect. Learning participation included class flow, class participation and class readiness. Gyeongsangdo students tended to have higher score than other areas. The educational effect and teaching effect had more influence on learning participation. Conclusion: To improve the better dental hygiene education, it is important to prepare the effective educational methods and find out the influencing factors for class immersion.

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.97-105
• /
• 1990

When conventional root canal treatment is failed or contraindicated, retrograde root canal filling following apicoectomy is a valuable procedure, aimed at hermetically sealing the root canal against leakage of irritants from the canal into the periapical tissue. In this in vitro investigation, to analyze apical microleakage electrochemically in teeth with different retrograde filling materials and preparation types, single - rooted tooth was cut 2mm from the apex and each Class I and Slot preparation was prepared. Experimental groups : Group 1. Amalgam filling with cavity varnish in Class I preparation Group 2. Scotchbond 2+Silux filling in Class I preparation Group 3. Gutta percha filling with ZOE cement in Class I preparation Group 4. Amalgam filling with cavity varnish in Slot preparation Group 5. Scotchbond 2+Silux filling in Slot preparation Each specimens was immersed in 1% solution of KCl, and applied a potential of 9V external power supply. Measurements of the current flow were obtained at 1, 2, 3, 7, 9, 12, 14, 18, 21, 25 and 28 day after immerson. Marginal microleakage were compared and evaluated. The results were as follows ; 1. The group filled with composite resin with dentin bonding agent shows lower apical microleakage value than the group filled with amalgam following varnish application (P<0.01). 2. In the group filled with gutta percha, apical microleakage value was the hightest 3. There was no significant difference between Class I cavity and Slot type cavity regardless of the used materials.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.63-68
• /
• 2019

Emerging applications such as Smart factory, in-car network, wide area power network require strict bounds on the end-to-end network delays. Flow-based scheduler in traditional Integrated Services (IntServ) architecture could be possible solution, yet its complexity prohibits practical implementation. Sub-optimal class-based scheduler cannot provide guaranteed delay since the burst increases rapidly as nodes are passed by. Therefore a leaky-bucket type regulator placed next to the scheduler is being considered widely. This paper proposes a simple server that achieves both fair scheduling and traffic regulation at the same time. The performance of the proposed server is investigated, and it is shown that a few msec delay bound can be achieved even in large scale networks.

• Computational Structural Engineering
• /
• v.17 no.2
• /
• pp.50-59
• /
• 2004

The Thunder Horse semi-submersible intended for production of hydrocarbons at Thunder Horse field in the Gulf of Mexico(GOM), Mississippi Canyon Block 778. The field is located in water depth of 1850m, 240km SE of New Orleans.(ref. Fig.1) These areas have estimated 1.5billion barrels reported. Also there are world class subsea hardwares with 15ksi Guideline less Trees, High pressure 8-12" Flow lines, Insulated Steel Catenary Risers with Flexible Connectors, 150km of Flow lines, and 100km Control & Injection Umbilicals(ref. Fig.2). (omitted)

• Journal of Korean Institute of Industrial Engineers
• /
• v.15 no.1
• /
• pp.23-30
• /
• 1989

The routing flexibility in FMSs can be achieved through two levels : the parallel operations and the alternative stations. To accommodate this pertaining flexibility for part routing in FMSs, a hierarchical routing principle is developed which considers both the routing flexibility and the performance effectiveness, which can also be easily implemented. For the proper implementation of this routing algorithm, the required information flow is identified which turns out to be very simple.

• BMB Reports
• /
• v.29 no.4
• /
• pp.286-293
• /
• 1996

Association of antigenic peptide with class I MHC is believed to be crucial for maintaining stable conformation of class I molecules. T2 cells that are defective in TAP gene function mainly express class I molecules with an unstable conformation due to little or no association with antigenic peptides, whereas T1 cells that are normal in TAP gene function mainly express the stable form of class I molecules. In this work, attempts were made to determine the molecular stability of stable and unstable class I molecules. Dissociation of HLA-A2 molecules on T1 and T2 cells was monitored by flow cytometry using anti-HLA-A2 antibody after the cells were treated with brefeldin A to shut down the transport of newly-assembled HLA-A2. Estimated dissociation rate constants for the stable and unstable forms of HLA-A2 were 0.076 $h^{-1}$ and 0.66 $h^{-1}$, respectively. It appeared that both T1 and T2 cells express stable and unstable class I complex, but with different ratios of the two forms. Furthermore, $interferon-{\gamma}$ treatment of T1 cells appeared to induce the expression of both the stable and unstable class I molecules. These results demonstrate that class I MHC molecules can be divided into two groups in terms of structural stability and that they exist on the cell surface in both forms in a certain ratio.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.230-239
• /
• 1998

Though limited, Model Human Processor (MHP) has been used to explain the complex users' behaviors during human-computer interactions in a simplified manner. MHP consists of perceptual, cognitive and motor systems, each with processors and memories interacting with each other in serial or parallel mode. The important parameters of memory include the storage capacity, the decay time, and the code type of a memorized item. The important parameter of a processor is the cycle time. Using these features of the model, this study developed a computerized cognitive process simulator to predict the cognitive process time of a class match task process. An experimental validity test result showed that the mean prediction time for cognitive process of the class match task simulated 50 times by the simulator was consistent with the mean cognitive process time of the same task performed by 37 subjects. Animation of the data flow during the class match task simulation will help understand the invisible human cognitive process.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.9
• /
• pp.911-915
• /
• 2008

Software birthmark is the inherent characteristics that can identify a program. In this paper, we propose a Java class theft detection technique based on static API traces of class files. We utilize control flow analysis to increase resilience, and we apply the semi-global alignment trace comparison algorithm to increase credibility. The credibility and resilience experiments for XML parsers show that our birthmark is more efficient than existing birthmarks.