• 생물정신의학
• /
• 제15권2호
• /
• pp.83-91
• /
• 2008

목 적 연성 신경학적 징후는 정신분열병의 유전과 관계되는 생물학적 표현형으로 여겨져 왔다. 본 연구에서는 연성 신경학적 징후가 유전적 하중과 관련해서 가족 내에서 연관성을 보이는지를 알아보고자 하였다. 대상 및 방법 정신분열병 환자로서 부모 중 한 명은 정신분열병의 가족력이 있고 나머지 한 명은 가족력이 없는 환자가(N=14) 모집되었다. 이들의 부모가 가진 가족력에 따라 유전적 하중을 정하였고 이를 위해 Family Interview for Genetic Studies(FIGS)로 직접 면담을 시행하였다. 환자의 부모에서 환자를 제외한 1차 혹은 2차 친척에서 정신분열병 환자가 있는 부모를 유전적 하중이 있는 '추정 보유자'(presumed carrier)(N=9)로, 그렇지 않은 부모를 '추정 비보유자' (presumed noncarrier)(N=11)로 구분하였다. 또한 정상 대조군은 1차 혹은 2차 친척에서 정신분열병의 가족력이 없는 일반인(N=12)이었다. 이들의 연성 신경학적 징후를 한국어판 신경학적 평가 척도(Neurological Evaluation Scale-Korean version)를 사용하여 평가하였으며 가족내 연관성에 대한 분석 방법으로 급내 상관계수법(Intra-Class Coefficients[ICC]) method)을 이용하였다. 결 과 연성 신경학적 징후의 하위 영역 중 운동 조정 영역에서 환자와 추정 보유자 간에 유의한 연관성이 존재하였고(ICC=.804, p=.016) 환자와 추정 비보유자와는 연관성이 존재하지 않았다. 운동 조정 영역 이외의 다른 하위 영역에서는 유전적 하중과 상관없이 가족내 연관성이 존재하지 않았다. 그러나, 환자군과 정상 대조군의 운동 조정 영역의 점수 간에는 통계적으로 유의한 차이가 존재하지 않았다. 결 론 이번 연구에서는 연성 신경학적 징후들이 정신분열병의 유전적 하중과 같이 유전되는 생물학적 표현형일 가능성이 입증되지 못하였다. 향후 보다 많은 수를 대상으로 한 추시 연구가 필요하다.

• Structural Engineering and Mechanics
• /
• 제18권1호
• /
• pp.113-124
• /
• 2004

The information on local stress acting in a bridge is required in many occasions such as fatigue assessment. The analysis by beam elements cannot yield this class of information adequately, while the finite element modeling of an entire long-span bridge by shell elements is impractical. In the present study, the hybrid modeling is tried out: only part of a bridge in which the point of interest is located is discretized by shell elements and the remaining part is modeled by beam elements. By solving a simple box girder problem, the effectiveness of this approach is discussed. This technique is then applied to the Rama IX Bridge for local stress evaluation. The numerical results compare very well with the results of a full-scale static loading test. The present research thus offers a practical yet accurate technique for the stress analysis of a long-span cable-stayed bridge.

• Nuclear Engineering and Technology
• /
• 제29권4호
• /
• pp.299-309
• /
• 1997

The neutronic feasibility of typical Korean three-loop 900MWe class PWR core loaded with mixed oxide fuels for both annual and 18-month cycle strategies has been investigated as a means for spent fuel management. For this study, a method of determining equivalent plutonium content was developed under the equivalence concept which gives the same cycle length as uranium fuel. Optimal plutonium zoning within the MOX assembly was also designed with the aim of minimizing the peak md power. Conceptual core designs hate hen developed for equilibrium cycle with the following variations: annual and 18-month cycle, 1/3 and full MOX loading schemes, and typical and high moderation lattice. The analysis of key core physics parameters shows that in all cases considered satisfactory core designs seem to be feasible, though addition of control rod system and change in Technical Specification for soluble boron concentration are required for full MOX loading in order to meet the current design requirements.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.17-20
• /
• 2011

The International Association of Classification Societies (IACS) had developed the Common Structural Rules (CSR) for bulk carriers as per the needs noted above. ISO and IMO GBS (Goal-Based Standards) are now being developed in this regard. This study has been prepared to verity the strength of forward cargo hold of 82,000 DWT class bulk carriers. A cargo hold/tank 3-D FE model was established to assess the structural adequacy of the primary structural members with the loading conditions. Full breadth model was established for the analysis considering asymmetric nature of structural layout and loading conditions. To summarize this result of structural assessment based on IACS CRS for bulk carrier, it is benefit to design this kind of bulk carriers and to study the strength assessment for the similar type of bulk carriers.

• 조명전기설비학회논문지
• /
• 제25권11호
• /
• pp.58-66
• /
• 2011

In this paper, the starting torque and efficiency characteristics of the induction motor (IM) for the electric vehicle (EV) are improved by changing the slot shapes of squirrel cage. The initial model of the induction motor is designed by the loading distribution method (LDM), and then the rotor with squirrel cage of NEMA class A is selected to optimize the slot shape by response surface method(RSM). The design variables of rotor slot shape are obtained by the RSM. Starting torque and efficiency were calculated by the equivalent circuit method. As a result, starting torque and efficiency of the optimized model shows good performance through whole-speed range.

• 한국물환경학회지
• /
• 제21권5호
• /
• pp.516-519
• /
• 2005

An useful protocol coiled load duration curve methodology to estimate contaminant loading to a river on an exceedance probability scale was developed in this research. The technique was further applied to estimate total coliform loading to the Geum River, using the daily mean flow rate and total coliform concentration data during January, 1996 and July, 2004 for the Gongju where an automated monitoring station is located. Drought flow of the Gongju (=50.3 cms) was equivalent to 40% on an exceedance probability scale. Load duration curve for total coliform loading at the Gongju was constructed. Standard duration curve was constructed with the water quality criteria for the class 2 (total coliform concentration = 1000 MPN/100 mL). By plotting load duration curve with standard duration curve, it could be revealed that water quality do not meet the desired water quality for 47% on an exceedance probability scale. If linearity between flow rate and coliform concentration is assumed, it can be interpretated that water quality exceeds desired criteria when average mean flow rate is over 51 cms.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.179-183
• /
• 2014

The fluid loading effect has been investigated for the shipboard equipment foundation mobility with finite element model. For the purpose, two kinds of finite element models for 60m class ship have been developed: global and local model. The former is for low frequency range and the latter for middle frequency range. These finite element models contain added mass explaining fluid loading effect. Added mass has been implemented with virtual mass matrix derived from Laplace equation governing fluid surrounding ship hull. The mobility assessment result for diesel generator foundation of the objective model shows that the fluid loading effect should be considered, especially in low frequency range, to more accurately assess shipboard equipment foundation mobility.

• Steel and Composite Structures
• /
• 제34권4호
• /
• pp.561-580
• /
• 2020

Buckling restrained braces (BRBs) were developed as an enhanced alternative to conventional braces by restraining their global buckling, thus allowing development of a stable quasi-symmetric hysteretic response. A wider adoption of buckling restrained braced frames is precluded due to proprietary character of most BRBs and the code requirement for experimental qualification. To overcome these problems, BRBs with capacities corresponding to typical steel multi-storey buildings in Romania were developed and experimentally tested in view of prequalification. In the second part of this paper, a complex nonlinear numerical model for the tested BRBs was developed in the finite element environment Abaqus. The calibration of the numerical model was performed at both component (material models: steel, concrete, unbonding material) and member levels (loading, geometrical imperfections). Geometrically and materially nonlinear analyses including imperfections were performed on buckling restrained braces models under cyclic loading. The calibrated models were further used to perform a parametric study aiming at assessing the influence of the strength of the buckling restraining mechanism, concrete class of the infill material, mechanical properties of steel used for the core, self-weight loading, and frame effect on the cyclic response of buckling restrained braces.

• 정보보호학회논문지
• /
• 제27권6호
• /
• pp.1271-1280
• /
• 2017

런타임 실행 압축 기술을 이용하는 안드로이드 패커(packer) 서비스는 덱스클래스로더(DexClassLoader)를 이용하여 원본 어플리케이션으로 전환한다. 하지만 덱스클래스로더의 API 인터페이스는 로드할 덱스(Dalvik EXcutable)의 경로와 컴파일 된 파일의 경로를 입력 받으므로 원본이 파일시스템에 드러나는 문제점이 있다. 따라서 해당 API를 패커 서비스에 그대로 사용하는 것은 안전하지 않다. 본 논문에서는 이 문제를 해결하기 위해 덱스클래스로더 API의 컴파일 흐름과 로드 흐름을 변경하여 해결하였다. 이 변경된 실행 흐름으로 인해 컴파일 된 파일을 암호화하여 파일 시스템에 두거나 메모리에만 존재하도록 하고, 이후 로드할 때 복호화 또는 치환을 하여 원본 앱 전환을 가능하게 한다. 제안하는 기법을 통해 원본 파일이 파일시스템에 노출되지 않음으로써 패커의 안정성이 올라갈 것이라 예상한다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.190-193
• /
• 2005

The purpose of the present study is to design a 500W-class micro scale composite wind turbine blade. The blade airfoil of FFA-W3-211 was selected to meet Korean weather condition. The skin-spar-f Dam sandwich type structure was adopted for improving buckling and vibration damping characteristics. The design loads were determined at wind speed of 25m/s. and the structural analysis was performed to confirm safety and stability from strength. buckling and natural frequency using the finite element code. NISA II [6]. The prototype was manufactured using the hand-lay up method and it was experimently tested using the sand bag loading method. In order to evaluate the design results. it was compared with experimental results. According to comparison results. the estimated results such as compressible stress. max tip deflection natural frequency and buckling load factor were well agreed with the experimental results.