• 한국재료학회지
• /
• 제13권11호
• /
• pp.761-768
• /
• 2003

The corrosion resistance and cytotoxicity behavior of Ti alloys were studied as a function of Nb contents(3wt.%Nb, 20wt.%Nb, 40wt.%Nb). Ti-Nb alloys were melted by vacuum arc furnace and then rolled to 50% reduction ratio after homogenized at 105$0^{\circ}C$ for 24hrs. The corrosion resistance of Ti-Nb alloys were investigated by potentiodynamic polarization test in the 0.9% NaCl and 5% HCI solution. Biocompatibility of Ti-Nb alloys was evaluated by cytotoxicity test. The results can be summarized as follows 1) The microstructure change from equiaxial to acicular and the increased $\beta$ phase in Ti-Nb alloys were obtained as the Nb content increased. 2) For the corrosion test in the solution of 0.9% NaCl and 5% HCI, the corrosion behavior of Ti-Nb alloys was similar to ASTM grade 2 CP Ti. 3) For the cytotoxicity test, Ti-Nb alloys showed excellent biocompatibility compared to ASTM grade 2 CP Ti, 316L STS and Co-Cr alloys.

• 공업화학
• /
• 제8권2호
• /
• pp.161-171
• /
• 1997

인쇄회로기판의 식각폐수를 전기화학적 방법을 이용하여 양극에서 이를 재생하고, 음극에서 구리를 석출하기 위한 실험을 행하였다. 양극에서의 Cu(I)의 산화에 따른 Cu(I)/Cu(II) 변화는 Pt와 Ag/AgCl/4M KCl 전극사이의 전위차를 이용하여 측정하였으며, 반응의 진행에 따른 양극에서의 염소기체 발생은 용액내에 Cu(I)의 농도를 일정치 이상으로 유지시키고, 비다공성 흑연전극을 이용하여 억제할 수 있었다. 그리고, 음극에서의 구리석출은 전류밀도 $360mA/cm^2$, 구리이온농도 12g/l 일때 가장 효율적이며 석출된 구리는 dendrite구조임을 알 수 있었다. 또한 석출효율과 회수방법을 고려할 때 음극으로서 Ti전극을 사용할 경우 가장 우수한 효율을 얻을 수 있었다. 전해온도가 증가함에 따라서 전류효율은 낮아졌으며, 전력효율은 $50^{\circ}C$에서 최대값을 나타내었다.

• 한국광물학회지
• /
• 제25권3호
• /
• pp.123-130
• /
• 2012

염소-차아염소산 용액을 소성정광에 적용하여 gold와 silver를 효과적으로 용출시키고자 하였다. 염소 : 차아염소산 혼합비율 1.5 : 1, 그리고 NaCl 농도를 1 M으로 적용하였을 때 Au 용출율은 겨우 75%와 81%이였다. 그러나 광액농도를 1%로, 그리고 용출온도를 $65^{\circ}C$로 적용하자 Au 용출율이 100%에 도달되었다. 왕수분해 및 염소-차아염소산 용출 고체 잔유물을 XRD분석을 실시한 결과 석영이 관찰되었다. 따라서 석영 속에 함유된 gold는 염소-차아염소산으로 용출시키지 못할 것으로 사료된다. 따라서 석영 속의 gold를 용출시키기 위해서는 더 작은 미립자로 전처리하거나 더 강력한 산화제를 적용해야 할 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.37-45
• /
• 1994

The possibility of reusing the paper sludge as a raw material of composition board mixed with cement was investigated. For the measurement of physical and mechanical properties, wood coment board and sludge combinend cement boards were fabricated with the three weigh ratios of paper sludge 10 % (SI), 20 % (S II) and 30 % (S III) to cement weight. For adding the cement hardning, $CaCl_2$ was also added to each mixed paste with the ratio of 1 %, 3 % and 5 % to cement weight, respectively. Crystal formation in paper sludge-, wood-cement composites was observed by scanning electron microscope. The results were summarized as follows. 1. Density and partial compressive strength of each specimens were relatively high in the order of sludge I, sludge II, Korean pine, Italian poplar and sludge III, sludge I, Korean pine, sludge II, Italian poplar and sludge III. 2. The mechanical properties of sludge-cement boards (S I and II) were higher than that of wood-cement boards prepared with Korean pine and Italian poplar. But the mechanical properties of wood-cement boards were improved by the adding of $CaCl_2$. 3. Water absorption and thickness swelling were increased with increase of sludge content to cement weight. 4. In SEM observation, sludge-cement composites showed sufficiently formed crystals but wood-cement composites showed poorly formed crystals.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제29권3호
• /
• pp.23-36
• /
• 2024

Miryang City, the study area, has a water supply rate of 87.4%, which is 12% lower than the national water supply rate of 99.4%, but has a high dependence on groundwater due to the high ratio of farms. In agricultural areas, contamination becomes relatively more critical, requiring significant attention to the management and conservation of groundwater resources. This study aims at estimate groundwater vulnerability of Miryang City using the DRASTIC index map, Piper diagram, and water quality data to correlated with the DRASTIC index. The results from DRASTIC map were divided into five classes: very high, high, moderate, low, and very low. The areas in central and southern part of study area, which are characterize by a very high index with [Ca-Cl] and [Na-Cl] water types, covering a large alluvium with the Miryang River and Nakdonggang River. In addition, a correlation analysis between groundwater quality parameters and the DRASTIC index was carried out. Chloride, sodium, and sulfate ions showed a weak relationship with DRASTIC index, with correlation coefficient was 0.507, 0.487 and 0.344, respectively. These results suggest that aquifer media, soil media, hydraulic conductivity, and chloride ion are important factors for groundwater vulnerability.

• 헤리티지:역사와 과학
• /
• 제56권2호
• /
• pp.148-169
• /
• 2023

하엽은 짙은 녹색을 띠는 전통 안료 중 하나로 알려져 있지만 색상, 원료물질, 제법 등에 대해서 명확히 규명되지 않은 상태이다. 다만, 단청, 괘불, 회화 등 채색문화유산의 안료 분석연구를 통해 밝혀진 하엽 안료의 입자형태나 구성광물 등을 볼 때 염 부식으로 제조된 동록 안료로 보인다. 따라서 하엽 안료를 복원하기 위해 고문헌 기록을 바탕으로 동록 안료의 제조방법을 연구하였다. 고문헌 기록에서 확인되는 동록 안료의 제조방법은 동분말과 부식제를 혼합한 후 습한 조건에서 방치하여 부식시키는 자연 부식방법이다. 이를 바탕으로 보다 효율적으로 동분말을 부식시키기 위해 부식시험기를 이용한 인공부식을 도입하였고, 부식제 혼합비율, 부식 기간에 따른 부식생성물의 상태를 분석하여 적정 혼합비율과 부식 기간을 선정하였다. 또한, 잔류 부식제를 제거하기 위한 염 제거 공정과 안료 채색 시 채도를 높이기 위한 정제공정을 추가하여 동록 안료의 제조방법을 체계적으로 정립하였다. 정립된 방법으로 제조된 동록 안료는 청록 혹은 녹색의 색상을 나타냈다. 안료 입자는 표면이 다공성으로 타원형 형태의 작은 입자들이 뭉쳐져 있는 형태를 보였다. 주요 구성원소는 구리(Cu)와 염소(Cl)이고, 구성광물은 녹염동광[atacamite, Cu2Cl(OH)3]으로 동정되었다. 제조된 동록 안료의 안정성 평가를 위해 촉진내후성 시험을 진행한 결과, 열화가 진행됨에 따라 녹색도가 일부 감소하고 황색도가 증가하는 색변화 경향을 보였다. 따라서 열화 전 동록 안료의 색도는 고단청의 하엽 안료와 비교할 때 황색도가 낮은 편이었으나 열화 후에는 황색도가 크게 증가하여 고단청의 하엽 안료와 유사한 색도 범위를 갖는 것으로 나타났다. 결과적으로 제조된 동록 안료는 입자형태나 구성광물뿐만 아니라 색상에서도 고단청의 하엽 안료를 구현하여 재현성이 높은 것으로 확인되었다.

• Carbon letters
• /
• 제24권
• /
• pp.28-35
• /
• 2017

We demonstrated an effective way of preparing melt spinnable mesophase pitches via catalytic hydrogenation of petroleum residue (fluidized catalytic cracking-decant oil) and their subsequent thermal soaking. The mesophase pitches thus obtained were analyzed in terms of their viscosity, elemental composition, solubility, molecular weight, softening point and optical texture. We found that zeolite-induced catalytic hydrogenation under high hydrogen pressure contributed to a large variation in the properties of the pitches. As the hydrogen pressure increased, the C/H ratio decreased, and the solubility in n-hexane increased. The mesophase pitch with entirely anisotropic domains of flow texture exhibited good meltspinnability. The mesophase carbon fibers obtained from the catalytically hydrogenated petroleum residue showed moderate mechanical properties.

• 한국미생물·생명공학회지
• /
• 제22권4호
• /
• pp.423-429
• /
• 1994

A bacterial strain which formed a distinct colony on agar plate containing naphthalene as a vapor phase and grew well ina liquid minimal medium was isolated and identified as Alcaligenes sp. A111. Optimum temperature and pH for the cultivation of Alcaligenes sp. A111 were 30$\cir$C and 7.0, respectively. Cell growth increased dramatically from 12 hours after inoculation and revealed a stationary phase at about 48 hours. Relative growth rate ($\mu$')increased hyperbolically depending on the conceration of naphthalene up to 500 ppm and reached to the maximum value pf 2.8/day, but $\mu$' didn't change within a range of 500~4000 ppm naphthalene. NH$_{4}$Cl or NH$_{4}$NO$_{3}$ was preferrd as a nitrogen source and a P : N ratio by weight og 6 : 1 was favorable to cell growth. Alcaligenes sp. A111 utilized the intermediates of degradation of naphthalene and showed tolerance to benzene, toluene, and octane. therefore, it is suggested that Alcaligenes sp. A111 could be effectively used for the biological treatment of wastewater containing naphthalene in the presence of some aromatic compounds.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.650-655
• /
• 2002

$SiO_2$ gels containing dispersed fine Te metal particles have been prepared by the sol- gel method using a starting solution containing Tetraethoxy Silane (Si($OC_2$ $H_{5}$ )$_4$), $H_2$O, Ethylalchol ($C_2$$H_{5}$OH), Nitric Acid ($HNO_3$) and Tellurium Tetracholoride ($TeCl_4$) in a several molar ratio. Gelling time of sols was about 3 days and viscosity of solution was very low about 2~3 cP for 3 days. Heat-treatments of the gel have been performed at 500, 700, 900, 1100 and $1300^{\circ}C$ for 1 hour, respectively. We have investigated TG-DTA, X-ray diffraction patterns and SEM of heat-treatmented gels. The size of Te fine particles dispersed in $SiO_2$ gel was about 0.8~1 $\mu\textrm{m}$ and the shape was almost quadrangle.

• Carbon letters
• /
• 제13권4호
• /
• pp.205-211
• /
• 2012

Methanol as a carbon source in chemical vapor deposition (CVD) graphene has an advantage over methane and hydrogen in that we can avoid optimizing an etching reagent condition. Since methanol itself can easily decompose into hydrocarbon and water (an etching reagent) at high temperatures [1], the pressure and the temperature of methanol are the only parameters we have to handle. In this study, synthetic conditions for highly crystalline and large area graphene have been optimized by adjusting pressure and temperature; the effect of each parameter was analyzed systematically by Raman, scanning electron microscope, transmission electron microscope, atomic force microscope, four-point-probe measurement, and UV-Vis. Defect density of graphene, represented by D/G ratio in Raman, decreased with increasing temperature and decreasing pressure; it negatively affected electrical conductivity. From our process and various analyses, methanol CVD growth for graphene has been found to be a safe, cheap, easy, and simple method to produce high quality, large area, and continuous graphene films.