• Title/Summary/Keyword: Cl Stabilization

Search Result 114, Processing Time 0.022 seconds

Effect of 5%Mg alloying in Al wire on corrosion resistance performance in saline solution (식염수에서 내식성 성능에 대한 Al 와이어의 5%Mg 합금 효과)

  • Singh, Jitendra Kumar;Lee, Han-Seung
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2022.04a
    • /
    • pp.93-94
    • /
    • 2022
  • The presence of chloride (Cl-) ions in environments causes localized corrosion resulting decrease the durability of the structures. In this study, 5% Mg containing Al alloys (Al-5Mg) wire used vis-à-vis compared its corrosion resistance with pure Al in 3.5wt.% NaCl solution with exposure periods. Initially both wires exhibited identical open circuit potential (OCP) attributed to the presence of native oxide film on the surface but with the exposure periods it shifted towards active direction owing to the dissolution of oxide film. The pure Al continuously shifted the OCP towards active direction while Al-5Mg shows stabilization of OCP after 8 days of exposure. The OCP of Al-5Mg is slightly higher compared to pure Al wire owing to the activeness of Mg. The total impedance of the Al-5Mg alloy is almost three times greater than pure Al with exposure periods in 3.5 wt.% NaCl solution. It might be formation of Al-Mg LDH (layered double hydroxide) thin film onto the surface.

  • PDF

Glycerol Addition for the Hyper-production and Stabilization of a Novel Carbohydrolase by Lipomyces starkeyi (전분을 이용한 탄수화물 분해효소의 고 생산과 효소 안정성 증가를 위안 글리세롤 첨가)

  • 이선옥;이진화;박준성;서은성;김창용;조동련;김도원;김도만
    • KSBB Journal
    • /
    • v.17 no.6
    • /
    • pp.586-589
    • /
    • 2002
  • Lipomyces starkeyi KSM 22 produces dextranase and amylase (DXAMase). The addition of 0.02% (w/v) 2-deoxy-D-glucose or 0.5% (w/v) glycerol into a 1% (w/v) starch medium increased the final activity of DXAMase produced 2.5 fold or 2.4 fold, respectively, compared to that of a 1% (w/v) starch medium. This activity was similar to that produced with 1% (w/v) dextran. The stability of purified OXAMase at 40$\^{C}$ for 3 weeks was tested using the various enzyme stabilizers. With the addition of 25% (v/v) glycerol, 90.9% of initial activity was left after 3 weeks. For practical use, the addition of 1% (v/v) glycerol with 50 mM of CaCl$_2$ or KH$_2$PO$_4$was adequate and maintained 73.4% of the initial activity under the test conditions used.

The Applicability of the Acid Mine Drainage Sludge in the Heavy Metal Stabilization in Soils (산성광산배수슬러지의 토양 중금속 안정화 적용 가능성)

  • Kim, Min-Suk;Min, Hyungi;Lee, Byeongjoo;Chang, Sein;Kim, Jeong-Gyu;Koo, Namin;Park, Jeong-Sik;Bak, Gwan-In
    • Korean Journal of Environmental Agriculture
    • /
    • v.33 no.2
    • /
    • pp.78-85
    • /
    • 2014
  • BACKGROUND: Recent studies using various industrial wastes for heavy metal stabilization in soil were conducted in order to find out new alternative amendments. The acid mine drainage sludge(AMDS) contains lots of metal oxides(hydroxides) that may be useful for heavy metal stabilization not only waste water treatment but also soil remediation. The aim of this study was to investigate the applicability of acid mine drainage sludge for heavy metals stabilization in soils METHODS AND RESULTS: Alkali soil contaminated with heavy metals was collected from the agricultural soils affected by the abandoned mine sites nearby. Three different amounts(1%, 3%, 5%) of AMDS were applied into control soil and contaminated soil. For determining the changes in the extractable heavy metals, $CaCl_2$ and Mehlich-3 were applied as chemical assessments for metal stabilization. For biological assessments, lettuce(Lactuca sativa L.) and chinese cabbage(Brassica rapa var. glabra) were cultivated and accumulation of heavy metals on each plant were determined. It was revealed that AMDS reduced heavy metal mobility and bioavailability in soil, which resulted in the decreases in the accumulation of As, Cd, Cu, Pb, and Zn in each plant. CONCLUSION: Though the high level of heavy metal concentrations in AMDS, any considerable increase in the heavy metal availability was not observed with control and contaminated soil. In conclusion, these results indicated that AMDS could be applied to heavy metal contaminated soil as an alternative amendments for reducing heavy metal mobility and bioavailability.

X-ray and Spectroscopy Studies of Mercury (II) and Silver (I) Complexes of α-Ketostabilized Phosphorus Ylides (α-케토안정화된 일리드화 인의 수은(II) 및 은(I) 착물에 대한 X-선 및 분광학적 연구)

  • Karami, K.;Buyukgungor, O.;Dalvand, H.
    • Journal of the Korean Chemical Society
    • /
    • v.55 no.1
    • /
    • pp.38-45
    • /
    • 2011
  • The complexation behavior of the $\alpha$-ketostabilized phosphorus ylides $Ph_3P$=CHC(O) $C_6H_4-X$ (X=Br, Ph) towards the transition metal ions mercury (II) and Silver (I) was investigated. The mercury(II) complex {$HgX_2$ [Y]} 2 ($Y_1$=4-bromo benzoyl methylene triphenyl phosphorane; X=Cl(1), Br(2), I(3), $Y_2$=4-phenyl benzoyl methylene triphenyl phosphorane; X=Cl(4), Br(5), I(6)) have been prepared from the reaction of $Y_1$ and $Y_2$ with $HgX_2$ (X=Cl, Br, I) respectively. Silver complexes [$Ag(Y_2)_2]$ X(X=$BF_4$(7), OTf(8)) of the $\alpha$-keto-stabilized phosphorus ylides ($Y_2$) were obtained by reacting this ylide with AgX (X=$BF_4$, OTf) in $Me_2CO$. The crystal structure of complexes (1) and (4) was discussed. These reactions led to binuclear complexes C-coordination of ylide and trans-like structure of complexes $[Y_1HgCl_2]_2$. $CHCl_3$ (1) and $[Y_2HgCl_2]_2$ (4) is demonstrated by single crystal X-ray analyses. Not only all of complexes have been studied by IR, $^1H$ and $^{31}P$ NMR spectroscopy, but also complexes 1-3 have been characterized by $^{13}$CNMR.

Preparation and characterization of isotropic pitch-based carbon fiber

  • Zhu, Jiadeng;Park, Sang Wook;Joh, Han-Ik;Kim, Hwan Chul;Lee, Sungho
    • Carbon letters
    • /
    • v.14 no.2
    • /
    • pp.94-98
    • /
    • 2013
  • Isotropic pitch fibers were stabilized and carbonized for preparing carbon fibers. To optimize the duration and temperature during the stabilization process, a thermogravimetric analysis was conducted. Stabilized fibers were carbonized at 1000, 1500, and $2000^{\circ}C$ in a furnace under a nitrogen atmosphere. An elemental analysis confirmed that the carbon content increased with an increase in the carbonization temperature. Although short graphitic-like layers were observed with carbon fibers heat-treated at 1500 and $2000^{\circ}C$, Raman spectroscopy and X-ray diffraction revealed no significant effect of the carbonization temperature on the crystalline structure of the carbon fibers, indicating the limit of developing an ordered structure of isotropic pitch-based carbon fibers. The electrical conductivity of the carbonized fiber reached $3.9{\times}10^4$ S/m with the carbonization temperature increasing to $2000^{\circ}C$ using a four-point method.

Inhibition of Lipoxygenase Activity by the Extract of Various Processed Garlic (마늘의 가공 조리 방법에 따른 lipoxygenase 활성도 저해 효과)

  • 김미리;모은경;이근종
    • Korean journal of food and cookery science
    • /
    • v.9 no.3
    • /
    • pp.215-221
    • /
    • 1993
  • Bioactivity of the extract from various processed garlic was evaluated based on the inhibition of lipoxygenase(LPO), and the effect of some stabilizers on the bioactivity was investigated. Water, ethanol or chloroform extract of 30 min boiled garlic showed 75%, 76% or 70% inhibition, respectively, compared to extracts of fresh garlic. In pickled garlic, LPO inhibition decreased gradually during storage. Chloroform extract of 40 day-stored pickled garlic inhibited LPO by 77%, and even on 60th day storage it still retained inhibitory effect of 73%, compared to that of fresh garlic. Meanwhile, the powdered (freeze-dried) garlic showed more bioactivity(80%) than the other processed garlics, and moreover, the jrreversible/unstable components seem to be stabilized by freeze-drying. The optimum pH for stabilization of bioactive components in garlic macerate was pH 3 for 48 hr incubation and pH 11 for 6 hr incubation. In addition, the effect of NaCl was not so great, although but maximal stabilization was observed at 150 mM. Stabilizing effect of $\alpha$-tocopherol was markedly great, and at 6mM it showed 308% stabilizing effect after 48hr incubation. More stabilizing effect was observed at lower concentrations of ascorbic acid($\leq$0.6mM) than higher concentrations. The stabilizing effect of soybean oil was found to be remarkable only during initial period(6 hr) of incubation.

  • PDF

Investigation into the mechanism of action of Moringa oleifera for its anti-asthmatic activity

  • Mehta, Anita;Agrawal, Babita
    • Advances in Traditional Medicine
    • /
    • v.8 no.1
    • /
    • pp.24-31
    • /
    • 2008
  • In the present investigation, we studied the effect of alcoholic extract of Moringa oleifera (M. oleifera) seed kernels on various experimental models of bronchial asthma. Significant (P < 0. 05) increase in preconvulsion time was observed due to pretreatment with M. oleifera when the guinea pigs were exposed to either acetylcholine (Ach) or histamine aerosol. This bronchodilating effect of M. oleifera was comparable to ketotifen fumarate. Spasmolytic effect of M. oleifera was also observed by dose dependent inhibition of ideal contractions induced by Ach, 5HT, histamine and $BaCl_2$. Alcoholic extract of M. oleifera produced significant dose dependent protection by egg albumin and compound 48/80 induced mast cell degranulation. Pretreatment with alcoholic extract of M. oleifera also decreased carrageenan induced rat paw edema, which was comparable to that of standard diclofenac sodium. Minimum inhibitory concentration for alcoholic extract of M. oleifera was low as compared to cold-water extract and hot water extract when antimicrobial activity was tested against various respiratory pathogens like Escherichia coli (E. coli), Staphylococus aureus (S. aureus) and pseudomonas aeruginosa (P. aeruginosa). Our data suggest that antiasthmatic activity of M. oleifera seed kernels may be due to its bronchodilator, anti-inflammatory, mast cell stabilization and antimicrobial activity.

Effect of carbonization temperature on crystalline structure and properties of isotropic pitch-based carbon fiber

  • Kim, Jung Dam;Roh, Jae-Seung;Kim, Myung-Soo
    • Carbon letters
    • /
    • v.21
    • /
    • pp.51-60
    • /
    • 2017
  • Isotropic pitch-based fibers produced from coal tar pitch with the melt-blowing method were carbonized at temperatures ranging from 800 to $1600^{\circ}C$ to investigate their crystalline structure and physical properties as a function of the carbonization temperature. The in-plane crystallite size ($L_a$) of the carbonized pitch fiber from X-ray diffraction increased monotonously by increasing the carbonization temperature resulting in a gradual increase in the electrical conductivity from 169 to 3800 S/cm. However, the variation in the $d_{002}$ spacing and stacking height of the crystallite ($L_c$) showed that the structural order perpendicular to the graphene planes got worse in carbonization temperatures from 800 to $1200^{\circ}C$ probably due to randomization through the process of gas evolution; however, structural ordering eventually occurred at around $1400^{\circ}C$. For the carbonized pitch powder without stabilization, structural ordering perpendicular to the graphene planes occurred at around $800-900^{\circ}C$ indicating that oxygen was inserted during the stabilization process. Additionally, the shear stress that occurred during the melt-blowing process might interfere with the crystallization of the CPF.

A Comparative Study on the Structural Characteristics of the Stabilized Soils with Ca, Al System Admixtures. (Ca, Al계 안정처리토의 구조적 특성의 비교)

  • Jeong, Du-Yeong;Choe, Gil-Yeol;Lee, Byeong-Seok
    • Geotechnical Engineering
    • /
    • v.2 no.3
    • /
    • pp.5-14
    • /
    • 1986
  • The results of stabilization process in silty.clays and sand-silts, which were, respectively, treated with Calcium hydroxide of the Calcium series and Aluminium Sulphate of the Aluminium series are follows. 1) In the former case used calcium hydrate and calcium cabonate for silty-clays, calcium aluminnium cabonate oxide hydrate and calcium carbonate for sandy-silts were produced 2) In the latter case used Aluminium Sulphate, by X-ray diffraction test, it was found that Aluminium Oxide was produced both in silty-clays and sandy-silts 3) As the results of stabilization process, in the former case, unconfined compression strength was increased greatly but in the latter case it was little increased.

  • PDF

A Study on the Characteristics and Utilization of Ash from ASR Incinerator (ASR 소각재의 이화학적 물성 및 재활용(再活用)을 위한 기초연구(基礎硏究))

  • Lee, Hwa-Young
    • Resources Recycling
    • /
    • v.16 no.2 s.76
    • /
    • pp.32-39
    • /
    • 2007
  • The measurement of physicochemical properties of ASR incineration ash has been carried dot and the preparation of light-weight material has also been performed using ASR ash for recycling point of view as building or construction materials. For this aim, chemical composition, particle size distribution, and heavy metal leachability were examined for 2 bottom ashes and 4 fly ashes obtained from the domestic ASR incinerator. In the present work, attempt has been made to prepare the lightweight material using boiler ash as a raw material, which is prepared by forming the mixture of boiler ash, lightweisht filler and inorganic binder and followed by calcination at elevated temperature. As a result, the content of Cu in bottom ash was as high as about 3wt% so that the recovery of Cu from ash was required. The major compound of SDR #5 and Bag filter #6 was found to be $CaCl_2{\cdot}Ca(OH)_2{\cdot}H_2O\;and\;CaCl_2{\cdot}4H_2O$, respectively. It is thought that heavy metal teachability of lightweight material prepared with boiler ash was significantly decreased due to the encapsulation or stabilization of heavy metal compounds.