• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.122-133
• /
• 1998

The CL network fer CBDS(Connectionless Broadband Data Service) defined by ITU-(International Telecommunication Union-Telecommunication) consists of CL(ConnectionLess) servers which route frames and links which connect between CL user and CL server or between CL servers[1][2]. In this configuration, two kinds of congestion, CL link congestion and CL server congestion may occur. Therefore this paper has proposed the scheme that can deal with the above congestion state of LAN traffic efficiently in interworking LANs in ATM network. Proposed schemes ale link-by-link scheme and hybrid scheme. Link-by-link scheme uses the ABR feedback loops of AIM layer between CL user and CL server or between CL servers, and the header translation table carrying out the routing function of frame. And hybrid scheme is the scheme that adds end-to-end loop to link-by-link scheme and then uses RM message using CLNAP-PDU(ConnectionLess Network Access Protocol - Protocol Data Units) of CL layer. These schemes can be implemented easily because of using the ABR loop of ATM layer, end-to-end loop of CL layer, and the routing function of CL server. In this paper the characteristic and effects of two schemes in CL server bas been compared and analyzed.

• The Korean Journal of Malacology
• /
• v.15 no.1
• /
• pp.57-62
• /
• 1999

Condition indices (Cl) are considered to be useful measurements of the nutritive and health status of bivalves although studies on Cl of bivalves are limited due to the lack of a standard formula for calculating Cl. This study attempts to generate Cl of the mussel, Mytilus coruscus inhabiting along the coastal area of Chuja Island in Cheju using three primary formulas. the formulas used in this study: (1) Cl-vol= [tissue dry weight (g) 1000] /shell cavity volume (ml). (2) Cl-wt= [tissue dry weight (g) 1000] / internal shell cavity capacity (g). (3) Cl-size= tissue wet weight (g)/[shell length (mm)]$\^$3/. Monthly condition indices calculated with the three formulas are compared using ANOVA, Duncan's multiple range test and Pearson correlation coefficient. In Chuja Island M. coruscus collected ranged from 50 to 180 mm in shell length. Monthly ranges of Cl-values were 67.48 to 140.61 (Cl-vol), 74.67 to 118.02 (Cl-wt) and 1.4 10$\^$-5) to 1.6 10$\^$-5/ (Cl-size). Cl-vol values in August were higher than two Cl-values in the other months. Monthly Cl-vol was significantly different from Cl-wt and Cl-size. (p<0.05). The results of this study suggest that volumetric condition index (Cl-vol) used in this study is acceptable as a standard measure to evaluate conditions of M. coruscus.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.87-92
• /
• 2013

Viscosities of $LaCl_3$-CsCl binary melts were measured by the capillary method over the range of their liquidus temperatures to about 1200 K. The cell constant were determined by using pure water. The results obtained are summerized as follows: Viscosities of melted $LaCl_3$ were decreased with the content of CsCl for all over the composition range of binary melts. Composition versus viscosity relation for the binary melt showed a non-linear relationship from the additivity line and the deviations showed a maximum value at about 60 mol% CsCl. This suggest the existence of the complex ion of $LaCl_4{^-}$ in the melt. Activation energy for the viscous flow of the binary melts decreased monotonously with the increasing content of CsCl after a few increasement till 40 mol% CsCl. All of these results were the resemble with the viscosities of $LaCl_3$-NaCl binary melts.

• Journal of Life Science
• /
• v.20 no.2
• /
• pp.298-303
• /
• 2010

In this work, the effects of $Cs^+$ on root growth of 2-day-old maize seedlings were scrutinized. CsCl (5 mM - 30 mM) decreased the fresh weight of the primary root and of the shoot above the coleoptilar node. The elongation growth of the primary root was also inhibited by CsCl. The CsCl-inhibited growth was partially restored by 60 mM KCl. Lineweaver-Burk plot of the reaction in the presence and absence of 60 mM KCl displayed competitive interaction of CsCl (at higher than 10 mM). However, the Reversal of the inhibition by 60 mM KCl did not follow the competitive relationship with 5 mM CsCl, indicating the presence of differential mechanisms of $K^+$ influence depending on the concentration of CsCl. The differential effects of CsCl dependent on the concentrations were also observed in the CsCl-evoked radial expansion of the subapical region of the root. In spite of the decrease in length of the root, shrinkage of the root apical meristem was not observed. CsCl above 10 mM induced the expression of ZmKUP1, indicating functional deficiency of $K^+$ due to competition with Cs. However, the expression of ZmKUP1 by 5 mM CsCl was unclear. Conclusively, exogenously applied $Cs^+$ decreased root elongation and fresh weight and caused radial expansion of the subapical region of the primary root in 2-day-old maize seedlings by complex mechanisms including competitive and noncompetitive interactions with $K^+$. Because the shrinkage of the root apical meristem was not observed, it is concluded that the effects of CsCl on maize root growth was mainly related to cell expansion.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.340-350
• /
• 1995

This study was conducted to obtain the basic information for the salt stress of Italian Ryegrass. Fourteen cultivars including 7 diploid and 7 tetraploid were subjected to eight levels of NaCl treatments during germination and early seedling stages. Germination percentage decreased remarkably over 300mM of NaCl concentration. The NaCl concentration that inhibited germination of 50% of the viable seeds in the cultivars was 344mM. The decreasing degree of germination percentage was higher in tetraploid type than in diploid type. The varietal difference of germination percentage was shown to be very conspicuous as the NaCl concentration increased. Top dry weight in 166 mM NaCl was decreased by 50% compared with that of control. Inhibition of NaCl appeared to be more in early seedling stage than in germination stage. Top dry weight of cultivars in NaCl stress was not related with germination capacity. Root dry weight in 148mM NaCl decreased by 50% compared with that of control. Root dry weight of cultivars was significantly correlated with top dry weight in NaCl treatment. Top dry weight and root dry weight was higher in diploid type than in tetraploid type at each 8 levels of NaCl concentration. Total chlorophyll content increased with the increase of NaCl concentration and the degree of increase in chlorophyll a was higher than that in chlorophyll b. Chlorophyll a was higher in tetraploid type than in diploid type. But chlorophyll b was higher in diploid type than in tetraploid type. There were significant correlation between chlorophyll a and top dry weight of cultivars over 150mM of NaCl concentration. Free proline content accumulated remarkably in NaCl treatment compared with control and was not difference between diploid type and tetraploid type. Free proline content of cultivars was not related with top dry weight in NaCl treatment.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.2
• /
• pp.111-120
• /
• 1997

The growth kinetion of $CuCl_x$ layer on Cu was investigated using $Cl_2$ gas with/without plasma. The etching kinetics ofit was also studied, in which PEt3 gas as well as $Cl_2$ gas were used. when plasma and DC bias were applied, not only the growth rate of $CuCl_x$ layer but also the surface concentration of Cl in $CuCl_x$ layer drastically increased. The growth mode is divided into three regimes, where the thinkness $CuCl_x$ layer ise proportional to t, lo9g $T^{1/2}$ , respectively, whether plasma, is applied or not. These three regime. It is also identified that the eath rate of Cu is drastically increased as the $Cl_2$ pressure is increased. However, when plasma and DC bias were applied, the etching rate is decreased, and ClCu-P-U layer is formed. in addition, as the etching time is increased, the surface concentration of Cl is increased and $CuCl_2$ formed partially.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3274-3278
• /
• 2013

$CF_2Cl{\cdots}Cl$, an elusive photo-isomer of $CF_2Cl_2$, has been observed in matrix IR spectra from the precursors exposed to radiation from laser ablation of transition-metals. Other plausible products, $CFCl_2{\cdots}F$ and $FClC{\cdots}F-Cl$ are not detected due to their considerably higher energies. Parallel to its previously reported analogues, the C-X bonds are considerably stronger than those of the reactant, and particularly the Cl atom that is weakly bound to the residual Cl atom forms an unusually strong carbon-halogen bond. NBO analysis reveals that the C-Cl bond is a true double bond, and the weak $Cl{\cdots}Cl$ bond is largely ionic, $F_2C=Cl^{\delta+}{\cdots}Cl^{\delta-}$. IRC computation reproduces smooth inter-conversion between the reactant and product, and the transition state is energetically close to the product, consistent with its prompt disappearance in the early stage of photolysis.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.282-287
• /
• 2006

Viscosities of $LaCl_3-NaCl$ binary melts were measured by the capillary method over the range of their liquidus temperatures to about 1200K. The cell constant were determined by using pure water. The results obtained are summerized as follows: Viscosities were decreased with the content of NaCl for all over the composition range of binary melts. Composition - viscosity relation for the binary melts show a non-linear from the additivity line and the deviations shows a maximum at about 60 mol% NaCl. This suggests the existence of the complex ion of $LaCl_4^-$ in the melt. Activation energy for viscous flow of the binary melts decrease monotonously with the increasing content of NaCl.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.74-79
• /
• 2015

$Na-ZnCl_2$ battery, which operates as the same mechanism of $Na-NiCl_2$ battery using solid-electrolyte, is able to reduce its material cost by 40 % comparing to the $Na-NiCl_2$ battery. It has been known that the $Na-ZnCl_2$ battery produces $Na_2ZnCl_4$ as an intermediate phase during charge/discharge process. Therefore, the redox process is divided into four steps having the voltage range of 1.92~2.13 V. However, effects of the critical factors such as the composition of cathode materials, depth of charge and discharge, and additives have not been reported yet. We examined the effect of the Zn/NaCl ratios and revealed that its optimum ratio was in the range of 1.3~1.7.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.325-325
• /
• 2006

Cationic polymerization of isobutyl vinyl ether using various metal halides was examined in toluene in the presence of an added base at $0^{\circ}C$. In conjunction with an appropriate weak base such as ethyl acetate or 1,4-dioxane, all metal halides but $FeBr_{3}\;and\;GaCl_{3}$ led to living cationic polymerization. The polymerization rates varied as follows: $FeBr_{3},\;GaCl_{3}\;>\;FeCl_{3}\;>\;SnCl_{4}\;>\;InCl_{3}\;>\;ZnCl_{2}\;>>\;AlCl_{3},\;HfCl_{4},\;ZrCl_{4}\;>\;EtAlCl_{2},\;BiCl_{3},\;TiCl4\;>>\;SiCl_{4}\;>\;GeCl_{4}$. This order partially corresponds to that of the equilibrium constant in the formation of a carbocation from a chloroalkane in the presence of a carbonyl compound. With extremely active Lewis acids, such as $FeBr_{3}\;and\;GaCl_{3}$, the use of a stronger base, THF, was required to achieve living polymerization.