• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.118-122
• /
• 2008

Degradations of phenol and chlorinated compounds mixtures were studied with ultrasound of 20 kHz and 0.57, 1.14 W/mL. In presence of carbon tetrachloride (CT), degradation rate of phenol is faster than chloroform (CF), dichloromethane (DCM) and phenol solution. It is due to that CT generates of free chlorine (HOCl and $OCl^-$) from the sonochemical degradation and plays a role of hydrogen atom scavenger. CF and DCM are react with free chlorine, so amount of free chlorine is smaller than CT solution. The degradation rates of chlorinated compounds decreased with co-presence of phenol in the solution due to the distribution ultrasonic energy to both compounds. The measured chloride ion was lower than the theoretical concentration assuming complete degradation. This means not all the contaminants destructed went through complete degradation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.2
• /
• pp.107-112
• /
• 2016

Most of the indoor positioning algorithms based on magnetic data mainly focus on reducing the accumulated error of the odometry data, such as signals produced by the inertial sensors. However, in most cases such as positioning by using smartphones in the indoor environment, those approaches seem unfeasible due to the absence of the inertial sensors. Thus, in this paper, we try to study a positioning algorithm exclusively based on the magnetic data. We refer to some thinking from the steps of Particle Filter and conduct an experiment to verify the application of the new algorithm. Besides, we use the variance of the result of the previous step to decrease the area to be matched in the next step, intending to improve the accuracy of the results. The result of the experiment shows that the new algorithm has a high probability to match with accuracy less than 2 meters in a 24 meters by 2.6 meters corridor.

• Journal of National Security and Military Science
• /
• s.2
• /
• pp.23-89
• /
• 2004

The protective area of military installations can be a essential investment goods for producting public goods like military installations and national security. For the purpose of this, The protective area of military installations are set up and applicated at important strategic areas. It causes colplications and frictions among the people, government and army inevitably to set up the protective area of military installations, as the relation between the army which produces security or public goods and the people that make and use valuable goods is opposed and contradictory to each other. Heretofore, the civil petition of the protective affair to military installations has been presented individually. As local self- government is fixed, a local selg-governing body presents many civil petitions now. Therefore the protective affair to military installations came to be examined carefully in the aspecs of improving the relationship between the civil and army, raising natinal competitiveness, and increasing efficiency of military operations. Though the relationship between the civil and army is opposed and contradictory, it is required to be in keeping with each other with a situation around society, that is, changes and trend of national security, politics, economy, society. Accordingly, if you drive plans of rational management to the protective area of military installations, you can not only achieve successful military installations, but also be a great help to growth of a local community. Then 「The Army with the people」worthy of the name can be real.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.5
• /
• pp.301-310
• /
• 2016

There are differences in seismic behavior between non-skewed bridges and skewed bridges due to in-plane rotations caused by pounding between the skewed deck and its abutments during strong earthquake. Many advances have been made in developing design codes and guidelines for dynamic analyses of non-skewed bridges. However, there remain significant uncertainties with regard to the structural response of skewed bridges caused by unusual seismic response characteristics. The purpose of this study is performing non-linear time history analysis of the bridges using abutment-soil interaction model considering pounding between the skewed deck and its abutments, and analyzing global seismic behavior characteristics of the skewed bridges to assess the possibility of unseating. Refined bridge model with abutment back fill, shear key and elastomeric bearing was developed using non-linear spring element. In order to evaluate the amplification of longitudinal and transverse displacement response, non-linear time history analysis was performed for single span bridges. Far-fault and near-fault ground motions were used as input ground motions. According to each parameter, seismic behavior of skewed bridges was evaluated.

• Journal of the Korean Geosynthetics Society
• /
• v.1 no.1
• /
• pp.23-29
• /
• 2002

Since 1980's in U.S.A and Japan, the studies on increasing the bearing capacity of railway roadbed using geocell system have been conducted for repair and reinforcement of railways constructed on soft soils. In this study, the railway roadbed reinforced with geocell system, used for repair and reinforcement of existing railways in Korea, has been analyzed and investigated the results of the previous studies conducted in Korea and other nations. And the method for estimating the railway roadbed thickness was developed based on the equivalent method using the multi-layer theory and the deformation modulus Ev.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.3.1-14
• /
• 2002

Many human lives and properties have been damaged by the annually occurring natural disasters. Among them, a typhoon accompanying a gale and a localized torrential downpour induce a first order damages. In this study, states, scales and other characteristics of slope failure induced by the typhoon Rusa, which damaged the whole Korea peninsular on August 30th for 3 days, were analyzed. In addition, permanent measures for slope failure are conducted to prepare natural disasters. Since the key factor on the slope failure is considered to be a rainfall. The characteristics of domestic rainfall and typhoon are investigated, and then failure forms and some characteristics of slope failure are analyzed. By comparing with the data of existing slopes, the hazard of slope failure is examined. There fundamental results could be applied to the future measures of slope failure.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1693-1706
• /
• 2008

It is of importance to determine the zero effective stress void ratio($e_{00}$), which is the void ratio at effective stress equal to zero, and the relationships of void ratio-effective stress and of void ratio-hydraulic conductivity for characterizing non-liner finite strain consolidation behavior for ultra-soft dredged materials. The zero effective stress void ratio means a transitional status from sedimentation to self-weight consolidation of very soft soil deposits, and acts as a starting point for self-weight consolidation in the non-linear finite strain numerical analysis such as PSDDF. In this paper, a new method for determining the zero effective stress void ratio has been introduced with the aid of measuring electrical resistivity of the specimen. A correlation between the zero effective stress void ratio and the initial slurry void ratio has been proposed, which can be used in PSDDF analysis as an input parameter. Combining all of the accessible experimental data, the consolidation characteristics of a dredged soil from the Incheon area has been studied in detail.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.111-116
• /
• 2008

콘관입시험(CPT)은 의사정적상태로 수행되는 현장시험방법으로서, 각종 기초구조물의 설계와 더불어 지반조사를 위한 대표적 방법으로 널리 적용되고 있다. 본 논문에서는 콘관입시험결과를 이용하여 사질토 지반에 있어서 지반강도의 상세평가법을 제안하고자 한다. 사질토의 강도는 상대밀도와 응력상태에 따라 변하는 상태의존적 성질을 나타내고 있으나, 이러한 역학적 성질은 실험실 내에서만 측정이 가능한 상태이며, 현장강도의 경험식이나, 대표강도의 평가만이 제안되어 있는 실정이다. 따라서 본 연구에서는 대표적 현장시험방법인 CPT를 이용하여 다이러턴시 특성 평가가 가능하며, 다양한 지반특성치가 반영될 수 있는 현장강도의 상세평가법을 제안하고자 한다. 이를 위해 실내삼축압축시험을 통해 얻어진 강도특성과 역학특성치들을 분석하였으며, 이를 토대로 수정 다일러턴시 평가법을 제안하였다. 제안된 방법의 검증을 위해 가압토조를 이용한 콘관입시험을 수행하였으며, 측정값과의 비교분석을 수행하였다.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1318-1327
• /
• 2008

Geotechnical sites in urban areas may have embedded structures such as utility lines and underground concrete structures, which cause difficulties in site investigation. This study is a preliminary research to establish knowledge base for developing an optimal technique for site investigation in urban areas. Surface-wave method and resistivity survey, which are frequently adopted for non-destructive site-investigation for geotechnical sites, were investigated to characterize effects of adjacent structures. In case of surface wave method, patterns of wave propagation were investigated for typical sets of multi-layered geotechnical profiles by numerical simulation based on forward modeling theory and field experiments for small-size model tests and real-scale tests in the field. In case of resistivity survey, 3-D finite element analyses and field tests were performed to investigate effects of adjacent concrete structures. These theoretical and experimental researches for surface-wave method and resistivity survey resulted in establishing physical criteria to cause interference of adjacent structures in site investigation at urban areas.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1290-1295
• /
• 2008

The relative density of soil indicate loose and dense state of sand. Because sand is low compressibility, initial relative density of sand is important effect factor of compression and shear behavior. To measure exactly relative density, the exactly maximum and minimum void ratio was determinated by laboratory tests. Generally, vibrating table method is adapted for minimum void ratio(KS F 2345). However KS F 2345 is not consider the particle break during the vibrating table test. In this study, The minimum void ratio is compared with a method of Pluviation and Vibrating table test results using the K-7(crushed sand). It is concluded that the K-7 sand particles were crushed during the vibrating table test and vibrating table test is not a suitable test for a crushed sand $e_{min}$.