• 한국지반공학회논문집
• /
• 제21권10호
• /
• pp.99-112
• /
• 2005

도심지에서의 지반굴착은 배면지반의 변위와 그에 따르는 건물의 손상을 유발시킨다. 굴착에 의한 지반변위의 예측과 굴착면 주변에 위치한 건물의 손상 위험도 평가는 설계단계에서 필수적인 요소이다. 본 논문에서는 기존의 굴착에 의한 지반변위 예측기법인 Peck의 방법과 Bowles의 방법을 조합하여 지보굴착에 따르는 배면지반 변위예측방법을 제안하였다. 또한, 배면지반의 Green-field 뒤틈각과 수평변형률을 이용한 인접건물 손상위험도 평가기법을 제안하였다. 이 기법은 싱가폴에서 시공중인 대규모 지반굴착공사의 설계에 성공적으로 적용되었다.

• Structural Engineering and Mechanics
• /
• 제31권6호
• /
• pp.639-662
• /
• 2009

A comprehensive investigation of the stochastic response of an isolated cable-stayed bridge subjected to spatially varying earthquake ground motion is performed. In this study, the Jindo Bridge built in South Korea is chosen as a numerical example. The bridge deck is assumed to be continuous from one end to the other end. The vertical movement of the stiffening girder is restrained and freedom of rotational movement on the transverse axis is provided for all piers and abutments. The longitudinal restraint is provided at the mainland pier. The A-frame towers are fixed at the base. To implement the base isolation procedure, the double concave friction pendulum bearings are placed at each of the four support points of the deck. Thus, the deck of the cable-stayed bridge is isolated from the towers using the double concave friction pendulum bearings which are sliding devices that utilize two spherical concave surfaces. The spatially varying earthquake ground motion is characterized by the incoherence and wave-passage effects. Mean of maximum response values obtained from the spatially varying earthquake ground motion case are compared for the isolated and non-isolated bridge models. It is pointed out that the base isolation of the considered cable-stayed bridge model subjected to the spatially varying earthquake ground motion significantly underestimates the deck and the tower responses.

• 센서학회지
• /
• 제24권5호
• /
• pp.306-310
• /
• 2015

IoT(Internet of Things) based underground risk assessment system surrounding water pipeline enables an advanced monitoring and prediction for unexpected underground hazards such as abrupt road-side subsidence and urban sinkholes due to a leak in water pipeline. For the development of successful assessment technology, the PSU(Water Pipeline Safety Unit) which detects the leakage and movement of water pipes. Then, the IoT-based underground risk assessment system surrounding water pipeline will be proposed. The system consists of early detection tools for underground events and correspondence services, by analyzing leakage and movement data collected from PSU. These methods must be continuous and reliable, and cover certain block area ranging a few kilometers, for properly applying to regional water supply changes.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.243-262
• /
• 2015

Optimal sensor placement (OSP) is a critical issue in construction and implementation of a sophisticated structural health monitoring (SHM) system. The uncertainties in the identified structural parameters based on the measured data may dramatically reduce the reliability of the condition evaluation results. In this paper, the information entropy, which provides an uncertainty metric for the identified structural parameters, is adopted as the performance measure for a sensor configuration, and the OSP problem is formulated as the multi-objective optimization problem of extracting the Pareto optimal sensor configurations that simultaneously minimize the appropriately defined information entropy indices. The nondirective movement glowworm swarm optimization (NMGSO) algorithm (based on the basic glowworm swarm optimization (GSO) algorithm) is proposed for identifying the effective Pareto optimal sensor configurations. The one-dimensional binary coding system is introduced to code the glowworms instead of the real vector coding method. The Hamming distance is employed to describe the divergence of different glowworms. The luciferin level of the glowworm is defined as a function of the rank value (RV) and the crowding distance (CD), which are deduced by non-dominated sorting. In addition, nondirective movement is developed to relocate the glowworms. A numerical simulation of a long-span suspension bridge is performed to demonstrate the effectiveness of the NMGSO algorithm. The results indicate that the NMGSO algorithm is capable of capturing the Pareto optimal sensor configurations with high accuracy and efficiency.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.199-212
• /
• 2018

본 연구에서는 깊은 굴착에 따른 인접구조물의 손상 평가 및 벽체 구조물의 안정성 평가를 하기 위한 지표의 거동 및 벽체 부재력의 효율적인 예측기법에 대한 내용을 다루었다. 우선적으로 지표의 거동 및 벽체 부재력에 영향을 미치는 매개 변수에 대한 연구를 수행하였고, 이를 토대로 다양한 굴착 조건에 대해 수치해석을 실시한 결과를 통해 데이터베이스를 구축하였다. 구축된 데이터베이스를 토대로 벽체의 부재력과 지표의 거동 각각의 해석 결과에 대한 인공신경망 엔진 학습을 수행하였으며 학습된 인공신경망을 이용하여 예측된 결과와 사용된 데이터베이스의 결과를 비교하여 인공신경망 엔진이 벽체의 부재력 및 지표의 거동예측에 효율적임을 검증하였다.

• 한국지반공학회논문집
• /
• 제24권4호
• /
• pp.23-36
• /
• 2008

본 연구는 측방변형을 일으키는 수평모래지반에 매설된 사각형 수동열말뚝의 모형실험에 대한 것이다. 말뚝의 형상, 열말뚝의 위치, 말뚝의 간격과 지반변형에 따른 열말뚝의 특성을 고찰하고자 하였다. 실험결과는 다음과 같다. 수평응력의 분포양상은 말뚝의 형상과 위치에 따라 삼각형, 사다리꼴, 사각형의 형태로 다양하게 나타났다. 휨모멘트는 B-type의 경우 outer pile이 inner pile보다 크게 나타났으나, H-type의 경우는 inner pile이 outer pile 보다 크게 나타났다. 수평저항력비$(R_f)$는 말뚝의 형상에 관계없이 열말뚝의 수평간격이 증가함에 따라 증가하는 경향으로 나타났다. 수평저항력의 작용점위치(Y/L)는 지반변위와 수평간격에 따라 큰 변화를 보이지 않으며, H-type이 B-type보다 조금 크게 나타났다.

• Smart Structures and Systems
• /
• 제15권6호
• /
• pp.1543-1567
• /
• 2015

In this study, a wireless crack sensor is developed for monitoring cracks propagating in two dimensions. This sensor is developed by incorporating a laser-based optical navigation sensor board (ADNS-9500) into a smart wireless platform (Imote2). To measure crack propagation, the Imote2 sends a signal to the ADNS-9500 to collect a sequence of images reflected from the concrete surface. These acquired images can be processed in the ADNS-9500 directly (the navigation mode) or sent to Imote2 for processing (the frame capture mode). The computed crack displacement can then be transmitted wirelessly to a base station. The design and the construction of this sensor are reported herein followed by some calibration tests on one prototype sensor. Test results show that the sensor can provide sub-millimeter accuracy under sinusoidal and step movement. Also, the two modes of operation offer complementary performance as the navigation mode is more accurate in tracking large amplitude and fast crack movement while the frame capture mode is more accurate for small and slow crack movement. These results illustrate the feasibility of developing such a crack sensor as well as point out directions of further research before its actual implementation.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 추계학술대회
• /
• pp.219-221
• /
• 2014

The objective of this paper is to simulate the dynamic behavior of a floating structure model, using image processing and close-range photogrammetry, instead of the contact sensors. Previously, the movement of structure was presented through the exterior orientation estimation of a single camera by space resection. The inverse resection yields the 6 orientation parameters of the floating structure, with respect to the camera coordinate system. The single camera solution is of interest in applications characterized by restriction in term of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This article discusses the theoretical determinations of camera exterior orientation based on Direct Linear Transformation and photogrammetric resection using least squares adjustment. The proposed method was used to monitor the motion of a floating model. The results of six degrees of freedom (6-DOF) by inverse resection show that the appropriate initial values by DLT can be effectually applied in least squares adjustment, to obtain the precision of exterior orientation parameters. Additionally, a comparison between the close-range photogrammetry and total station results was feasibly verified. Therefore, the proposed method can be considered as an efficient solution to simulating the movement of floating structure.

• 국제초고층학회논문집
• /
• 제6권1호
• /
• pp.11-19
• /
• 2017

High-rise buildings move during construction due to time-dependent material properties of concrete (creep and shrinkage), construction sequences, and structural shapes. The building movements, including vertical and horizontal displacements, result from the sum of axial and lateral deformation of vertical members at each level. In addition to the vertical shortenings, the lateral movement induced by differential shortening can have adverse effects on the construction tolerance and serviceability of non-structural elements such as elevators and curtain walls. In this study a construction stage analysis method is developed to predict lateral movement induced by shortening, including the effect of creep and shrinkage. The algorithm of construction stage analysis is combined with the FE analysis program. It is then applied to predict lateral movement of a 58-story reinforced concrete building that was constructed in Kuala Lumpur, Malaysia. Gravity induced lateral movement of this building is predicted by the construction stage analysis. A field three-dimensional laser scanning survey is carried out to verify the prediction results, and satisfactory agreement is obtained.

• Geomechanics and Engineering
• /
• 제6권1호
• /
• pp.17-31
• /
• 2014

This paper investigates the development of failure surfaces induced by an embankment on soft marine clay deposits and the characteristics of such surfaces through numerical simulations and its comparative study with monitoring results. It is well known that the factor of safety of embankment slopes is closely related to the vertical loading, including the height of the embankment. That is, an increase in the embankment height reduces the factor of safety. However, few studies have examined the relationship between the lateral movement of soft soil beneath the embankment and the factor of safety. In addition, no study has investigated the distribution of the pore pressure coefficient B value along the failure surface. This paper conducts a continuum analysis using finite difference methods to characterize the development of failure surfaces during embankment construction on soft marine clay deposits. The results of the continuum analysis for failure surfaces, stress, displacement, and the factor of safety can be used for the management of embankment construction. In failure mechanism, it has been validated that a large shear displacement causes change of stress and pore pressure along the failure surface. In addition, the pore pressure coefficient B value decreases along the failure surface as the embankment height increases. This means that the rate of change in stress is higher than that in pore pressure.