• 한국해양공학회지
• /
• 제25권5호
• /
• pp.21-26
• /
• 2011

Seawater lift pump systems are responsible for maintaining open canal levels to provide the suction flow of circulating water pumps at the set point. The objective of this paper is to design a 2-stage mixed flow pump (for seawater lifting), investigate the new impeller modeling method, and performance improvements of the impeller by using a commercial CFD code. The rotating speed of the impeller is 1,750 rpm with a flow rate of 2,700 m3/h. A finite volume method with a structured mesh and realized k-${\varepsilon}$ turbulent model is used to guarantee a more accurate prediction of turbulent flow in the pump impeller. The performance variables such as the static head, brake horsepower, and efficiency of the mixed flow pump are compared based on changes in the impeller blade shape.

• 한국자동차공학회논문집
• /
• 제15권2호
• /
• pp.95-100
• /
• 2007

An experimental study was performed to evaluate the in-plate evaporation heat transfer and flow characteristics of a evaporator used in automobile. Two test-cores with different heat transfer area, bead-shape and bead-array were tested, A type and B type. For the heat transfer, Nusselt number for B type test-core reaches a value nearly equal to the one for A type test-core, in the whole range of equivalent Reynolds number. But, for the same mass flow rate of refrigerant, hA for B type test-core becomes higher with the increase of the mass quality of refrigerant than for A type test-core. In a flow visualization experiment, the wake zone of refrigerant circulating at u-turn position of plate is observed.

• 펄프종이기술
• /
• 제35권5호
• /
• pp.37-45
• /
• 2003

To investigate the influence of the design and operating parameters of the headbox on hydrodynamics, a pilot headbox system and pressure monitoring apparatus were constructed. The pilot headbox system consisted of a circulating water reservoir, centrifugal pump, distributor, turbulence generator and slice. The distributor was designed to function as a pressure attenuator. Flow rate to the headbox and MD and CD velocity profiles in the slice zone were monitored using an ultrasonic flowmeter and Pitot tubes, respectively. As the distance from the step diffusor increased, evener CD velocity profile was observed. Wall effect increased with the increase of the velocity. Flow stability in the headbox was evaluated by injecting a dye at the outlet of the distributor. Application of theoretical analysis based on CFD in designing headboxes is briefly discussed.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.381-385
• /
• 1999

To investigate the influence of the design and operating parameters of the headbox on hydrodynamics, a pilot headbox system and pressure monitoring apparatus were constructed. The pilot headbox system consisted of a circulating water reservoir, centrifugal pump, distributor, step diffusor and slice. The distributor was designed to function as a pressure attenuator. Flow rate to the headbox and MD and CD velocity profiles in the slice zone were monitored using an ultrasonic flowmeter and Pitot tubes, respectively. As the distance from the step diffusor increased, evener CD velocity profile was observed. Wall effect increased with the increase of the velocity. Flow stability in the headbox was evaluated by injecting a dye at the outlet of the distributor. Application of theoretical analysis based on CFD in designing headboxes is briefly discussed.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.257-262
• /
• 2011

A low capacity generator converted to high capacity of 40m3 is designed and developed in order to use the hydroxy gas in the steel manufacturing process. For efficient design, it is increased from 8 electrode tubes to 10 electrode tubes as well as expanding the diameter of cell integument up to two times bigger, which can increase the amount of hydrogen occurrence per a cell significantly. In addition, circulating pump and pipe, heat exchanger of affiliated SUS material have been used in the circulation of electrolysis catalyst, and circulating cooling section and piping design are also developed. The flame trap is designed into all-in-one suitable check valve in the flow rate of 28-35m3/h and its application is possibly applied in work operation. It is found that the efficiency of generator developed is enhanced substantially up to 84%. It is expected that the application in this field can be expanded significantly by this study.

• 멤브레인
• /
• 제29권6호
• /
• pp.339-347
• /
• 2019

정삼투 공정(forward osmosis, FO)은 역삼투 공정(reverse osmosis, RO)에 비해 저압으로 운영되므로 오염 제어, 유지 보수, 막 세정 및 잠재적 에너지 저감 측면에서 큰 이점이 있어 다양한 분야에 적용할 수 있는 기술이다. 특히, 정삼투 공정의 막오염층이 비교적 느슨하고 분산된 특성을 가지므로 역삼투 공정과 달리 물리세정만으로도 충분한 막오염 제어가 가능하다. 하지만 기존 연구들의 경우 정삼투 물리세정에 적합한 세정 유속을 적용하지 않아 최적화 운전을 하지 못했다는 한계가 있다. 따라서 이 연구는 경제적인 에너지량으로 높은 효율의 세정을 보일 수 있는 적절한 유속의 정당성 평가를 목적으로 한다. 정삼투 공정 막오염 실험을 8.54 cm/s 순환 유속으로 유지하고 세 가지 세정유속으로 회복률과 SEC (specific energy consumption) 비교 평가하였다. 이 실험의 결과로 2배속 세정이 3배속 세정의 수투과도 회복률 만큼의 높은 효율을 보이는 동시에, 2배속 세정이 높은 세정효율 및 경제적인 SEC를 보이는 적절한 유속이라는 것을 확인하였다.

• 플랜트 저널
• /
• 제14권2호
• /
• pp.33-38
• /
• 2018

본 연구에서는 순환유동층보일러의 베드가 과열되어 층 물질의 소결이 발생하고 노 내 유동물질에 의해 보일러튜브가 마모 되는 것을 최소화하기 위하여, 노 하부 베드의 층 물질량 조정을 통한 베드 온도 변화를 실험적으로 연구하였다. 실험은 300MW급 순환유동층보일러인 여수화력 2호기를 대상으로 하였으며 터빈출력, 석탄소비량, 공기량 등을 고정한 상태에서 층 물질 양을 감소시켜 베드 압력을 설계값 4.5KPa에서 2.5KPa까지 감소시켰다. 결론적으로 층 물질 양을 적정하게 줄이면 베드 온도가 저하 되나, 지속적으로 저하되지 않는 것을 확인 하였으며, 베드 압력 3.0KPa, 즉 베드 물질량 110 톤을 변곡점으로 하여 베드 온도는 상승하기 시작하였다. 층 물질량이 충분히 많은 상태에서, 층 물질량이 감소되면 베드 온도는 저하되며, 층 물질량이 적정량 보다 적으면 노 내 유동물질의 순환량 감소로 베드 온도는 상승함을 알 수 있었다. 또한 유동층보일러에서 베드 온도 변화는 단순히 층 물질의 양 뿐만 아니라, 보일러 용량 및 연료의 성상 등에 따라 변화 추이가 매우 다양하게 나타난다는 것을 알 수 있었다.

• 한국환경과학회지
• /
• 제16권4호
• /
• pp.441-447
• /
• 2007

This study was carried out to investigate the effect of electrochemical (EC) disinfection of artificial wastewater contaminated by Escherichia coli culture. Circulated batch type electrochemical disinfection system using three plates electrodes was used. Also, the several factors (pH, ORP, DO, temperature, current, conductivity) were measured in order to investigate the fundamental design factor in the EC disinfection system. It was demonstrated that the EC process was highly effective for wastewater disinfection. At the constant voltage, the disinfection efficiency was increased according to time. The disinfection efficiency and current increased as the increase of voltage. The variation of conductivity was a little related to the variation of CFU (colony forming units). The differences in disinfection efficiency according to the ice pack and the variation of electrodes were not occurred. The EC disinfection efficiency and current increased according to the increase of circulating flow rate.

• Corrosion Science and Technology
• /
• 제18권4호
• /
• pp.148-153
• /
• 2019

Pure nickel with a thickness of 1 mm was plated on type 304 stainless steels and low alloy steels (JIS G3131 SPHC) by electrolytic plating method in a circulating plating bath. Plating performance, mechanical properties, and surface characteristics were evaluated in terms of pretreatment process, anode material, pH, current density, and flow rate of the plating solution. Addition of hydrochloric acid during pre-treatment process improved the adhesion performance of plating. To improve plating efficiency, it is desirable to use S-nickel rather than electrolytic nickel. The use of S-nickel was also confirmed to be desirable for maintaining the pH and concentration of the plated solution. The defect of the plating using S-nickel anode produced pit on the surface. However, it is believed that proper control can be obtained by increasing the flow rate. Internal stress and hardness values of electrolytic nickel plating according to current density need to be carried out with further studies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.421-428
• /
• 2011

최근 지구 온난화와 더불어 급격한 기후 변화 등으로 여름철 주간 냉방 수요가 급격히 증가하여 이에 따른 전력 수요량이 증가하고 있다. 또한 주간 전력 피크로 인한 급격한 전력부하 상승은 전력 수급의 불균형을 가져 와 사회적 문제로 대두되고 있다. 이를 위해 개발된 축냉시스템은 전력사용량이 상대적으로 적은 심야시간에 냉열을 만들어 탱크에 저장해 두었다가 그것을 주간 냉방 전력 사용 피크시간에 이용함으로써, 냉동기의 용량이 작아지고 냉동기를 고효율로 운전할 수 있으며, 갑작스런 부하 증가에 적절히 대응할 수 있는 등 여러 가지 장점을 갖고 있다. 이로 인하여 주간전력 피크를 줄여주는 효과를 가진다. 축냉시스템 중 하나인 슬러리아이스형은 슬러리아이스가 과냉되지 않은 작은 입자형태를 갖고 있어 해빙특성이 뛰어나므로 부하변동에 빠르게 반응할 수 있으며, 그 저장과 재생 및 수송 분야에서 그 장점과 기능이 입증되었다. 본 실험에서는 슬러리아이스 생성 효율을 높이기 위하여 역전유동층을 이용하였다. 이러한 역전유동층은 냉각관 표면에 얼음 부착이 심화되기 전에 얼음 입자를 분리시켜 수 내지 수십 미크론 단위(0.1~0.001 mm)의 슬러리아이스를 생성하도록 하였다.