• 제목/요약/키워드: Circulating Fluidized Combustor

검색결과 37건 처리시간 0.021초

이중 순환식 유동층 연소로내에서 2차 공기 주입에 의한 CO, NOx 저감효과 (Effect of Secondary Air Injection on CO and NOx Emission in an Internally Circulating Fluidized Bed Combustor)

  • 장석돈;신동훈;황정호
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.204-211
    • /
    • 2002
  • Combustion experiments are carried out to obtain the fundamental data for application of a internally circulating fluidized bed combustor to the combustion of paper sludge wastes. Experimental parameters are identified as secondary air ratio, sludge weight and water contents. The secondary air ratio was varied from 0 to 20% and water content was 14%, 25%, 35%, 45%, 62% and sludge weight was 30g, 60g, 90g. As a result, carbon conversion ratio was higher than injection of primary air. Emission of CO and NOx reduced with an increase of secondary air injection.

  • PDF

폐기물 연료의 순환유동층 연소기술 (Circulating Fluidized Bed Combustion of Refuse Derived Fuel)

  • 선도원;배달희;이승용;조성호
    • 자원리싸이클링
    • /
    • 제15권1호
    • /
    • pp.58-65
    • /
    • 2006
  • 폐플라스틱과 건조 슬러지를 원료로 제조한 RDF (Refused Plastic Fuel)를 순환유동층 보일러에서 연소 하는 새로운 개념의 기술이 개발 중이다. 연소시험을 통해 RDF의 연소특성과 배연특성을 연구하여 설계 자료를 확보하였다. 연소성은 양호하였으며 중요한 공해물질인 HCl 발생은 150ppm 미만으로 나타났다. 기존의 석탄용 순환유동층 보일러와 RDF 전용 순환유동층 보일러의 차이점을 분석하고 순환유동층 RDF 전용 보일러 공정의 개념 설계를 수행하였다.

폐기물 연료의 순환유동층 연소기술 (Circulating Fluidized Bed Combustion of Refuse Derived Fuel)

  • 선도원;배달희;이승용;조성호
    • 한국자원리싸이클링학회:학술대회논문집
    • /
    • 한국자원리싸이클링학회 2005년도 추계정기총회 및 제26회 학술발표대회 고분자리싸이클링기술 특별심포지엄
    • /
    • pp.124-134
    • /
    • 2005
  • 폐플라스틱과 건조 슬러지를 원료로 제조한 RDF (Refused Plastic Fuel)를 순환유동층 보일러에서 연소 하는 새로운 개념의 기술이 개발 중이다. 연소시험을 통해 RDF의 연소특성과 배연특성을 연구하여 설계 자료를 확보하였다. 연소성은 양호하였으며 중요한 공해물질인 HCl 발생은 150ppm 미만으로 나타났다. 기존의 석탄용 순환유동층 보일러와 RDF 전용 순환유동층 보일러의 차이점을 분석하고 순환유동층 RDF 전용 보일러 공정의 개념 설계를 수행하였다.

  • PDF

RDF연소를 위한 순환유동층보일러개발 (Development of Circulating Fluidized Bed Boiler for Refused Derived Fuel)

  • 배달희;선도원
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.71-77
    • /
    • 2005
  • Combustion of RDF and wastewater sludge was performed in a 0.1MWth bench scale circulating fluidized bed combustor(CFBC), Combustion characteristics of the RDF and sludge mixture demonstrated stable combustion conditions. Component analysis, Combustion characteristics was measured before and after the test, and applications for commercial 1MWe CFBC boiler were prepared. The release of hazardous components such as $SO_2$ and HCl was relatively low values of 50 and 150ppm, respectively.

  • PDF

고로슬래그 기반 순환유동층 플라이애시 및 미분탄 플라이애시 혼입에 따른 시멘트 모르타르의 특성 (Properties of Cement Mortar According to Mixing of Circulating Fluidized Bed Fly Ash and Pulverized Coal Fly Ash based on Blast Furnace Slag)

  • 조성우;나형원;형원길
    • 한국건축시공학회지
    • /
    • 제21권2호
    • /
    • pp.141-148
    • /
    • 2021
  • 본 연구에서는 산업부산물 중 순환유동층 연소방식과 미분탄 연소과정에서 발생되는 플라이애시와 고로슬래그 미분말을 치환한 시멘트 모르타르의 특성을 파악하였다. 연구 결과, 순환유동층 플라이애시 및 미분탄 플라이애시 혼합 사용 시 강도발현 뿐만 아니라 내구성 측면에서도 유리하게 나타난다. 순환유동층 플라이애시는 초기 반응성 향상에 기여하며, 미분탄 플라이애시는 포졸란 반응으로 장기 강도 발현에 관여하게 된다. 따라서 순환유동층 플라이애시와 미분탄 플라이애시의 혼합사용은 고로슬래그 미분말을 치환한 시멘트 모르타르의 상호 보완적인 요소로 작용함을 알 수 있다.

배치형 내부 사이클론식 순환유동층 연소로내 2차 공기 주입에 의한 슬러지 소각 유해 배가스 저감효과 (Effect of Secondary Air Injection on Emission from Sludge Incineration in a Batch-type Internally Cycloned Circulating Fluidized Bed Combustor)

  • 장석돈;신동훈;황정호
    • 한국연소학회지
    • /
    • 제7권3호
    • /
    • pp.16-22
    • /
    • 2002
  • Combustion performance of an internally cycloned circulating fluidized bed for paper sludge was discussed through a series of batch type experiments. Operation parameters such as water content, feeding mass of sludge and secondary air injection rate were varied to find out the effect on the combustion performance, which was examined with carbon conversion rate and pollutant emission such as CO and NOx. A conventional solid fuel reaction was observed in the experiments of varying water content and feeding mass of the sludge, which is characterized with kinetic limited reaction zone, diffusion limited reaction zone and transition zone. Secondary air injection with swirl enhances the mixing of the gas phase as well as the solid phase, and improves combustion efficiency accompanied with higher carbon conversion rate and lower pollutant emission rate.

  • PDF

순환유동층에서 폐수슬러지와 석탄의 혼소 특성 (Incineration of Waste Water Sludge and Coal In a Circulating Fluidized Bed Combustor)

  • 배달희;선도원;박재현;류호정;박도현
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.165-172
    • /
    • 2004
  • Co-incineration of coal and wastewater sludge was r;erfonn:rl in a O.lMWth bench scale circulating fluidized bed combustor(CFBC) Sludge was received from a wastewater treatment plant in a dye industrial complex in Busan. Metropolis. Moisture content of received sludge was 80%. Coal and sludge mixture was prepared with weight ratio of 90/10, 85/15 and 80/20. Co-combustion characteristics of the coal and sludge mixture demonstrated stable combustion conditions. Component analysis, incineration characteristics, boiler performance was measured before and after the test and application for commercial 59MWth CFBC boiler. The release of hazardous components such as $SO_2$ and Cl was suppressed by the presence of inherent minerals of Ca, Na, K in coal and sludge mixture. Pre-drying was not essential but it was recommended for the benefits of manageability of sludge.

  • PDF

Pilot 순환유동층 연소장치에서의 목재펠릿과 아역청탄 혼소 특성 (Characteristics of Co-Combustion of Wood Pellet with Sub-Bituminus Coal in A Pilot CFB Combustor)

  • 김동원;박경일;이종민;배용채
    • 한국수소및신에너지학회논문집
    • /
    • 제30권5호
    • /
    • pp.436-447
    • /
    • 2019
  • The circulating fluidized bed boiler has an advantage that can burn a variety of fuels from low-grade fuel to coal. In this study, for the design of a circulating fluidized bed boiler using wood pellets, a circulating fluidized bed combustion test device using no external heater was manufactured and used. According to the increase of co-combustion rate with wood pellet, combustion fraction and heat flux by combustor height were measured and pollutant emission characteristics were analyzed. In terms of combustibility, the effect on primary and secondary air ratio were also studied. In addition, as a result of analysis of the effect of corrosive nanoparticles on the combustion of coal with wood pellets, it was confirmed that coal is mostly composed of Ca and S, whereas wood pellets are mostly composed of K, Cl, and Na.

한국산 저질무연탄 연소용 순환식유동층 연소로 개발(간막이벽과 내부노즐을 설치한 순환유동층내에서의 유체거동) (Technical Development for the Circulating Fluidized Bed Combustor of firing Korean Low Grade Anthracite Coals (Particle Flow Patterns in a Circulating Fluidized-Bed with an internal Nozzle and a Partition Wall))

  • 이관석
    • 열처리공학회지
    • /
    • 제6권4호
    • /
    • pp.243-248
    • /
    • 1993
  • A Circulating Fluidized-Bed (CFB) with an internal nozzle and a partition wall was proposed. The technique of fluidization is related to operations first used commercially in the fields of metallurgical and mechanical engineering such as the heat treatment of metals and power station combustors. In the modified CFB, an internal nozzle and a partition wall were additionally set in the main bed. This cold mode CFB apparatus made of acrylic resin; the main bed is 1,500mm high and 100mm in the inner diameter, the internal nozzle is 130mm high and 10mm in the inner diameter, and the partition wall is 7mm thick and 100mm in the diameter. Glass beads of $89{\mu}m$ in the mean diameter were employed as bed materials.

  • PDF

연소방식별 폐기물 고형연료(RDF)의 연소특성 연구 (A Study on Combustion Characteristics of Refuse Derived Fuel(RDF) in Various Incinerators)

  • 김우현
    • 자원리싸이클링
    • /
    • 제15권1호
    • /
    • pp.46-57
    • /
    • 2006
  • 폐기물고형연료(RDF : Resused Derived Fuel)를 연료로 하는 연소기술의 개발을 위하여 기포유동층 연소로와 순환유동층 연소로, 연속연소식 연소로, 회분식 연소로 등 다양한 연소장치를 이용하여 연소 특성실험을 하였다. 여러 종류의 연소설비에서 RDF의 연소 및 배출가스 특성을 비교, 분석하였으며 RDF 전용 연소설비에 대하여 보다 깊은 연구의 기초 자료로 활용하자고 하였다. 기포 유동층 및 순환유동층연소로에서는 적정투입량과 가스공탑속도등 적정운전조건에 따라 안정적인 연소가 이루어지는 것을 확인할 수 있었다. 순환유동층 연소로에서 연소조건에 따라 연료 중의 질소성분과 연소공기 중의 산소와의 반응이 커져서 NOx의 농도가 높아지는 것을 알 수 있었으며 $SO_2$는 매우 낮은 농도로 측정되어 RDF의 유동층 연소시 거의 발생하지 않는 것으로 판단되었으며, HCl의 경우 평균 36.4ppm으로 배출허용기준치보다는 낮으나 저감대책이 필요한 것으로 판단되었다. 연속연소식 연소로와 회분식 연소로의 경우 성형 RDF와 fluff RDF를 비교 실험한 결과 높은 밀도를 가진 성형 RDF의 연소가 안정적인 열회수 측면에서 더 유리한 것을 알 수 있었으며 배가스 특성은 비슷한 값을 나타내었으며 배출가스 특성은 비슷하였다.